AchichaMmuo:


Myparts.com
Office at Festac, you'll get whatever you want.

Thank you

Crixie:

Jos , Plateau

How much is it?

kingreign:


You need to see the smile of satisfaction I had on my face when I read this post. That smile was priceless. Enjoy your car, I’m happy for you!

kingreign:


That single difference in part number is an indication that it’s not meant for your car. Your car’s exact part number ought to match all figure and character on the ecu sticker.

Hello bro. So I finally got the exact brainbox part number.

And guess what, the car finally entered gear 4.

Thanks for your help. I really appreciate

Crixie:
We have .... But call gazzuzz since you are in Lagos

Gazzuzz said he doesn't have

Where's your location and how much do you sell?

Anybody

kingreign:


That single difference in part number is an indication that it’s not meant for your car. Your car’s exact part number ought to match all figure and character on the ecu sticker.

Okay then.

kingreign:


I’m looking toward the ECU being a culprit. That said, I have not diagnosed or tested the car so I am not 100% sure.

Okay then. I guess I'll just have to be patient until I see the correct ECU part number.

It's super scarce.

But I wonder why 89661-02M90 won't work.

Can a change in 1 number affect the functionality of the car?

Does anyone know where can I buy original Toyota Super Long Life coolant in Lagos?

kingreign:


Have someone who knows his onion check the socket if any pin is bent in the ECU, and in the socket that connects to the transmission

Nothing of such.

Though, the input/turbine speed sensor error is still there even after changing the sensor and rewiring.

Do you think the wrong ECU is responsible for this error?

kingreign:

Hmmmm try replacing that ecm

I'll try. That's my last option.

Just that getting the correct part number is hard

kingreign:


Was the gear selecting the over drive gear (the 4th or last gear) before at the time of purchase or not?

That was my mistake.

I didn't drive the car on the express until after a week and I immediately noticed it wasn't entering 4

kingreign:


Speak to your programmer or whosoever got the ECu for you to replace it to the right part number let’s start properly.

Unfortunately, that's how I bought the car

kingreign:


Can you kindly take snapshots of the ECM label?

Here

Do you buy brainbox?

kingreign:


Please, check if this is the exact type of ECU installed in your car.

The correct part number is: 89661-02M91

anything other than this, may not provide full functionality to your car.

I checked and I saw 89661-02M90

Isoni:
Please what engine oil is recommended for serving 2009 Toyota Corolla and after how many miles?

OW-20 recommended by Toyota

Isoni:
Please i need your advice.

My 2009 Toyota Corolla is not shifting to gear 4. My mechanic noticed it when he changed the fuel pump,

I have changed the transmission oil but the issue persists.

Gear one, two and three changes normally and the car is driving smoothly.

I don't know what the challenge is

If possible, please recommend a very good transmission mechanic in Abuja that i can visit?

Hello bro.

Were you able to fix this problem?

I'm having the same issue.

kingreign:


Please, check if this is the exact type of ECU installed in your car.

The correct part number is: 89661-02M91

anything other than this, may not provide full functionality to your car.

Okay. Thank you.

kingreign:

Rescan the engine and transmission for codes again and post here.

Also, have it at the back of your mind, if the ECU was replaced previously and the right ecu wasn’t used, you may be having this issue. Post your VIN and I’d decide it and search online to show you a sample of the matching ECU type(s) for your car.

No error codes. The check engine light is off.

1NXBU40E99Z077810

kingreign:

You need to carry out physical checks on the wiring on the transmission. There are two sensors on top the transmission and it has two wires each which plugs into the sensors via sockets. Have a multimeter and read the conductivity of the wires. If it registers, it’s fine. Proceed to the sensor and check the resistivity of the sensor any reading outside 60-680 Ohms range, you replace the sensor.

It’s more of a professional job and less of a DIY job.

If you’re in Abuja and environ, do contact me to fix it.

Hello bro.

So I got a gear master to check the wiring on the transmission.

According to him, the brain box had been changed and the wiring wasn't done well. That was the cause of the P0717 error code.

So he fixed it and the error code has disappeared.

But the only problem I have is the gear not still entering 4.

When I'm on 100 km/hr, the RPM gets at high as 4000 and doesn't shift to the last gear which makes the revving sound so high.

What do you think the problem could be?

kingreign:

You need to carry out physical checks on the wiring on the transmission. There are two sensors on top the transmission and it has two wires each which plugs into the sensors via sockets. Have a multimeter and read the conductivity of the wires. If it registers, it’s fine. Proceed to the sensor and check the resistivity of the sensor any reading outside 60-680 Ohms range, you replace the sensor.

It’s more of a professional job and less of a DIY job.

If you’re in Abuja and environ, do contact me to fix it.

Thank you very much.

I'm in Lagos. Can you recommend someone in Lagos?

Also, is it a job for a rewire or a gear master?

How can I resolve a Toyota corolla 2009 with P0717 error code - Input/turbine speed sensor.

Car sometimes jerks before changing gear from 1 to 2 and 2 to 3.

And it doesn't enter gear 4.

Ayoola003:
The change of name comes first. And you need a legal practitioner for that. If you are in lagos, I can recommend someone for you.

Please why do I need a legal practitioner?

Hi guys.

For someone who wants to do change of name due to marriage and passport renewal...

Which one comes first?

Giveaway price

alaricsaltzman:
Barely used Cway Water dispenser with 1 bottle for sale.

Hot and cold

In perfect condition

Location: Ogudu, Lagos

Price: 30k firm

Call/WhatsApp: 0.8.0.8.1.7.3.4.8.9.9

Sold

Sold

Still available

alaricsaltzman:
Barely used Cway Water dispenser with 1 bottle for sale.

Hot and cold

In perfect condition

Location: Ogudu, Lagos

Price: 35k (negotiable)

Call/WhatsApp: 0.8.0.8.1.7.3.4.8.9.9

Selling

Selling

Selling