Stats: 3,188,996 members, 7,936,193 topics. Date: Saturday, 31 August 2024 at 07:29 AM |
Nairaland Forum / Boma4success's Profile / Boma4success's Posts
![]() |
Hello, Is anybody here? I have a question please @rukky44 |
![]() |
Hello, Competent construction Engineers in the house, Please I'll like to be enlightened on the effect of what I did, I channelled my waste waters(kitchen and toilet floor drains) into the septic tank, I only linked the soakaway and the septic tank together, therefore the soakaway is only there to take from the septic tank anytime it is full. Some people saw this and ruled that what I did will have a negative effects on my septic tank in the future. Please how true is this? I'll appreciate vivid explanations. Thanks |
![]() |
I am urgently in need of tidal prediction table for: BAKANA NEW CALABAR RIVER West Central Africa Standard Time: UTC+01:00 Date: 16th Nov - 15th Dec, 2020. I'll be glad if anyone can help me with this information. Thanks in anticipation |
![]() |
I am urgently in need of tidal prediction table for: BAKANA NEW CALABAR RIVER West Central Africa Standard Time: UTC+01:00 Date: 16th Nov - 15th Dec, 2020. I'll be glad if anyone can help me with this information. Thanks in anticipation |
![]() |
I am urgently in need of tidal prediction table for: BAKANA NEW CALABAR RIVER West Central Africa Standard Time: UTC+01:00 Date: 16th Nov - 15th Dec, 2020. I'll be glad if anyone can help me with this information. Thanks in anticipation 1 Like |
![]() |
I need tidal prediction table for: BAKANA NEW CALABAR RIVER West Central Africa Standard Time: UTC+01:00 Date: 16th Nov - 15th Dec, 2020. I'll be glad if anyone can help me with this information. Thanks in anticipation |
![]() |
Hello friends, can someone pls clarify me?? My Tiler said I don't need to do concrete flooring before tiling, he said they will just water the red sand for enough compactment and then they tile, and he also said that my wardrobe and cabinets GMP frames should be installed after he completes the tiling eventhou I thought the installation should be done before tiling. How reliable are these two information pls?? 1 Like |
![]() |
.. |
![]() |
I'm single and searching, I'm a Muslim, a Yoruba guy but I resides in PH. In my late twenties and I'm a Geoinformatician by profession. A practicing Muslim sister, beautiful, single Yoruba sister that is between the ages of 23 and 26 and ready for marriage should dm me. Thanks |
![]() |
Etranshub:u don't get it, it was working in the showroom and even in d service center but yet not working in my house 1 Like |
![]() |
Etranshub:They have taken mine to LG service center all to no avail |
![]() |
Etranshub:Wow its a good thing I'm not alone, mine is LG LHD457B. So how did you go about it, is it working fine now?? 1 Like |
![]() |
OgaVoltron:I have everywhere else in my neighborhood, its not working but if I take it to d office where I bought it, it will work |
![]() |
Larryfest:Thanks for your advice, I'm grateful 2 Likes |
![]() |
This is real, to God |
![]() |
Please come to my aid, I bought my home theater(with 2yrs warranty) somewhere around Rukpokwu in Port Harcourt in Dec, 2017. But since the beginning of 2019 I have not been able to use the item because it just won't ON anytime I tried to put it ON. I have gone to the sales office and complained but to my greatest surprise it worked quite well when I got there. But anytime I take it home and plug it, it won't just work at all. I have taken the item to their office in not less than 3 different occasions but I kept experiencing the same problem. The sales attendants had to follow me to my house recently to check if the problem is actually from my power source but surprisingly again the machine worked well immediately they plugged it. It looked to them as if I'm lying or something, I tried to ON and OFF the machine many times and it kept on working fine until they left. I switched OFF my power generator and they went their way. To my greatest surprise again, later in the evening when I tried putting it ON, it refused to work ooooo. I just don't understand what is going on. Please advice or come to my aid. I'll be looking forward to hearing from you. Thanks in anticipation 1 Like |
![]() |
Hello nlanders, Please come to my aid, I bought my home theater(with 2yrs warranty) somewhere around Rukpokwu in Port Harcourt in Dec, 2017. But since the beginning of 2019 I have not been able to use the item because it just won't ON anytime I tried to put it ON. I have gone to the sales office and complained but to my greatest surprise it worked quite well when I got there. But anytime I take it home and plug it, it won't just work at all. I have taken the item to their office in not less than 3 different occasions but I kept experiencing the same problem. The sales attendants had to follow me to my house recently to check if the problem is actually from my power source but surprisingly again the machine worked well immediately they plugged it. It looked to them as if I'm lying or something, I tried to ON and OFF the machine many times and it kept on working fine until they left. I switched OFF my power generator and they went their way. To my greatest surprise again, later in the evening when I tried putting it ON, it refused to work ooooo. I just don't understand what is going on. Please advice or come to my aid. I'll be looking forward to hearing from you. Thanks in anticipation |
![]() |
Hello NLanders, Please come to my aid, I bought my home theater(with 2yrs warranty) somewhere around Rukpokwu in Port Harcourt in Dec, 2017. But since the beginning of 2019 I have not been able to use the item because it just won't ON anytime I tried to put it ON. I have gone to the sales office and complained but to my greatest surprise it worked quite well when I got there. But anytime I take it home and plug it, it won't just work at all. I have taken the item to their office in not less than 3 different occasions but I kept experiencing the same problem. The sales attendants had to follow me to my house recently to check if the problem is actually from my power source but surprisingly again the machine worked well immediately they plugged it. It looked to them as if I'm lying or something, I tried to ON and OFF the machine many times and it kept on working fine until they left. I switched OFF my power generator and they went their way. To my greatest surprise again, later in the evening when I tried putting it ON, it refused to work ooooo. I just don't understand what is going on. Please advice or come to my aid. I'll be looking forward to hearing from you. Thanks in anticipation |
![]() |
supajizy: It is best you set out d entire diameter for excavation and then set out d center points afterwards. Consult an experienced surveyor for your points setting out. I am one 1 Like |
![]() |
bixton:I appreciate you sir 1 Like |
![]() |
Hello my great Engineers in the house, please I will like to be enlightened on the construction of a water tank stand over a septic tank. My engineer advised I build my tank stand on the septic / soak away tank we are about to construct. He said we will only need 4pcs of 16mm to reinforce the water tank stand pillar from inside the ground to the top(where d water tank will be placed). And 12mm rods will be used for other things like underground pillars, first chaining, second chaining and the slab. Please is this best way to go about it? God bless you as you drop your comments / advices. |
![]() |
A very pleasant day to the Engineers in the house, please I will like to be enlightened on the construction of a water tank stand over a septic tank. My engineer advised I build my tank stand on the septic / soak away tank we are about to construct. He said we will only need 4pcs of 16mm to reinforce the water tank stand pillar from inside the ground to the top(where d water tank will be placed). And 12mm rods will be used for other things like underground pillars, first chaining, second chaining and the slab. Please is this best way to go about it? God bless you as you drop your comments / advices. |
![]() |
Dubemcapital1:Thanks |
![]() |
boma4success: ![]() |
![]() |
boma4success: Waiting for comments on this from you guys plsss |
![]() |
MrHighSea:thanks alot, more contributions will be appreciated |
![]() |
Hello NLanders, I propose to construct a Soakaway Pit+Septic Tank of LxBxH = (12x8x10)ft. The SP+ST will serve a 1bedroom(existing) and 4bedroom(proposed) bungalow. And the SP+ST will be constructed at just 3ft away from d 1bedroom building. Please what do you guys see to the dimensions and its distance away from the building PS: the ground is not a swampy area I will appreciate your professional advices and enlightenment 1 Like |
![]() |
Hello NLanders, I propose to construct a Soakaway Pit+Septic Tank of LxBxH = (12x8x10)ft. The SP+ST will serve a 1bedroom(existing) and 4bedroom(proposed) bungalow. And the SP+ST will be constructed at just 3ft away from d 1bedroom building. Please what do you guys see to the dimensions and its distance away from the building ![]() PS: the ground is not a swampy area. I will appreciate your professional advices and enlightenment |
![]() |
Hello landers, please I'll appreciate if any experienced person can give me a break down of required materials to build this one bedroom flat. From foundation to tiling and painting. Just d quantity of materials required at each stage of development, I'll do the market survey of their costs based on my location. Thanks alot.
|
![]() |
Hello landers, please I'll appreciate if any experienced person can give me a break down of required materials to build this one bedroom flat. From foundation to tiling and painting. Just d quantity of materials required at each stage of development, I'll do the market survey of their costs based on my location. Thanks alot.
|
![]() |
bomasek: In my case, BOMA is a nickname. So pls leave it as that sir/ma. Thanks |
![]() |
I've been praying to Allah all these while to provide me a beautiful and practicing religious sister for marriage, Alhamdulilah I met one sister recently and we became best of friends and from friendship it grew into a relationship. But each time I'm alone, I use to ask my self, do you really love this sister and do you believe your marriage with her will last if you eventually marry her?? The truth is that this sister is quite good in all ramifications except "facial beauty" (to me). As you read my message, you or any other reasonable human being might be wondering if "facial beauty" is enough as a yardstick to determine who one gets married to but to me it is... And the question that keeps running on my mind is that if my love for such a decent young lady is questionable just because of "facial beauty", how then can we grow in love after marriage while she is getting old? when it is obvious that the more one gets old the more ones beauty fades away. Please enlighten me on what to do, I really don't know how to answer the questions coming from my thoughts... No badmouth plsss! Thanks |
(Go Up)
Sections: politics (1) business autos (1) jobs (1) career education (1) romance computers phones travel sports fashion health religion celebs tv-movies music-radio literature webmasters programming techmarket Links: (1) (2) (3) (4) (5) (6) (7) (8) (9) (10) Nairaland - Copyright © 2005 - 2024 Oluwaseun Osewa. All rights reserved. See How To Advertise. 50 |