The battery energy storage connectors market is expected to witness a fast development during the forecast period. The increasing demand for battery energy storage systems (BESS) across industries such as utility, industrial, commercial and residential is one of the key factors driving the growth of this market.

Battery Energy Storage Connectors (BESCs) are a key component in the storage revolution that is happening around us. They are an integral part of energy storage systems and can be used for large-scale grid applications or for home use in solar systems. BESCs have several advantages over traditional battery connectors, such as higher performance, better safety and compatibility with various types of batteries.
Battery energy storage connectors are a critical component to the integration of solar and wind into the grid. These systems can be used to provide peak shaving, load shifting, frequency regulation, voltage support and other services. The lack of standardization across countries means that battery energy storage connectors can only be used in a limited range of applications.

A standardized connector would enable lower cost and easier installation of batteries, which would increase their adoption.

Shenzhen Guchen Electronic Co., Ltd, founded in 2013, is a high-tech enterprise specializing in the research and development, production and sales of electronic components. The company is located in Shenzhen City, Guangdong Province, China.
The company is specialized in manufacturing and exporting of EV HV Components, such as high voltage connector, high voltage wire harness, high voltage cable, MSD connector, PDU, MCU, and other related products on BESS interconnection such as battery pole connector and copper bus bar connector.

Guchen Electronic has advanced production equipment and testing equipment. We adhere to the concept of "quality first" service tenet; our products have passed CE certification. The products are exported to Europe, America and Southeast Asia countries etc.. The company has introduced advanced equipment from Germany and Japan to ensure product quality, which makes us one of the leading manufacturers in China's electric vehicle industry. Our main customers are major automotive manufacturers in China such as BYD Automobile Co., Ltd., Chery Automobile Co., Ltd., Changan Automobile Co., Ltd., Dongfeng Motor Corporation Limited (DFM) etc..

Guchen Electronic has accumulated rich experience in product design and manufacturing; it owns a set of advanced production equipment and professional testing equipment; it also develops new products according to customer requirements every year.

High Voltage Wire Harness has been designed and manufactured to meet stringent requirements of the automotive industry. With a full line of wire harnesses, we can meet your needs, no matter how large or small they may be. With our experience in this field, we can provide solutions that are innovative and cost effective.
High Voltage Wire Harness for Electric Vehicle is a kind of high voltage cable that is used to transfer electrical energy between parts of an electrical circuit or system. It is also a cable that provides an interface between an electrical device and its power supply.
Our high voltage wire harnesses are used in many applications including:
Automotive
Electric Vehicle
Hybrid Vehicle

-------------------
The Future of Automotive Industry
The automotive industry is moving towards a future in which electric vehicles will be the norm, with worldwide sales expected to reach 1 million by 2020. The move towards electric vehicles will require a complete redesign of power distribution systems and charging infrastructure. As more companies enter this space, it is important to understand how these new technologies can impact our daily lives and what they mean for our transportation system.

For its excellent electrical properties, this shielded silicone rubber copper cable can resist heat without deteriorating over time. The silicone rubber ensures that the shielded wire does not undergo cold flow when exposed to high temperatures. The cable is self-extinguishing and flame retardant; hence, it helps prevent fires or explosions caused by the high voltage cables or circuits running through. This type of cable also has good EMC characteristics and an insulation layer that protects against water damage.

Benefits: When compared to other types of wires, this shielded high voltage silicone rubber copper wire is stronger and more resilient to physical damage. Other benefits include its flexibility at low temperatures, ability to bend up to 20 degree angle and ease with which it can be installed. A Shielded High Voltage Silicone Rubber Copper Cable is made of silicone rubber for flexible, spring-like form. Its mechanical and electrical properties allow the cable to be used in a wide range of applications. The cable is suitable for a variety of uses including power supply equipment, transformers, switch gears, motors, generators etc.

High Voltage Cables For Electric Vehicles

High voltage cables and wires are used in electrical systems for high voltage electric vehicles, such as electric cars, electric buses and trams. High voltage cables are also used in overhead power lines in some countries, and in substations.

The high voltage cable is usually made up of several insulated wires laid side by side inside a protective cover (insulation) made from plastic or rubber. The wires inside the cable carry electrical current from one place to another.

The main purpose of a high voltage cable is to transmit electrical energy with minimum loss over long distances through an insulating material that does not conduct electricity.

Electric vehicle high voltage wiring harness is a kind of special electrical products, which is produced according to the national standard. It is widely used in electric vehicles, such as electric buses, trams and trucks. The product can be used for battery charging line and inverter power supply line. Through the high-quality copper conductor with insulation polyvinyl chloride (PVC) sheath, it is durable and has good mechanical properties.

The high voltage wiring harness is made by the Shenzhen Guchen Electronics Co., Ltd. It is a high-tech enterprise specializing in the production of electronic products and accessories for the automobile industry. The company has a professional design team, a complete set of advanced equipment and stable supply chain.

The company has its own brand - Guchen, which specializes in the production of high-quality high-voltage electric vehicle parts (such as EV HV cable, CCS2 charging connector, electric vehicle HV connectors), etc.
Our EV products are mainly distributed in the United States, Europe and Southeast Asia markets, where we have established long-term cooperation with many large customers.

This is a heavy duty charging cable designed to charge electric vehicles at 22KW. It is built with a type 2 to type 2 connection and is rated at 32 Amps. This makes it perfect for use with the EV Supercharger stations or other charging stations that can provide up to 22kW of power.
It can be used at home or in public charging stations. This product is an ideal solution for charging your electric vehicles at home or in public charging stations. The product is also available with different cable lengths, so you can choose the one that best suits your needs.


The 22Kw 32A 3 Phase Type 2 to Type 2 EV Charging Cable is made of high-quality materials and has been tested carefully before being put on the market. The cable is safe and durable, so you won't have trouble using it for a long time.
The product comes with a manufacturer's warranty of 12 months, so if anything goes wrong with it during this period, you can contact us and we will replace it for free.

3.6KW Single Phase charging cable (Type 2 to Type 2) with 5m-10m length, suitable for charging at public charging stations or privately owned residential sites. The cable is designed to be compatible with all electric vehicles that have the Type 2 connector on their charge port.
The 3.6kW single-phase EV charging cable provides support for up to 3.6kW on EV charging.

The 3.6KW Single Phase EV Charging Cable Type 2 to Type 2 is a high quality, heavy duty cable that is made to charge your electric vehicle at up to 3.6kW. This EV charging cable is designed for use with the electric vehicles that use the type 2 connector. The cable is made from premium components including copper conductors and aluminum casing for excellent conductivity and durability.

3.6KW Single Phase EV Charging Cable is a type 2 cable that charges at 3.6kW. This cable can be used with any EVSE that supports 3.6kW charging