Truth is finally coming to bare.

Naijapal:


Just like that?

Obviously it is a campaign to tarnish his image.
It is obviously a campaign

He said brabus used 0.33 thickness
And nobody produces those thickness

This is obviously a case of

Brabus delivering what a client wanted and it ended up backfiring.


Cos from all these stories

Client wanted a particular design which brabus knows will end up spoiling the whole project. Brabus still went ahead to do it.

I will blame brabus here.
No b everything wey client want, na him dem dey do.
If you can't do it
Walk away.


If that work is going to cause health or any other form of hazard na so you for enter am because you were trying to do what man wanted.

Secondly
3strikes is just looking for revenge.
From the screenshot you posted earlier, you lied.
At no point did abdulwatex affirmed that brabus used 0.33
Na you talk am. And you were clearly wrong as there is no 0.33.

But the blame is on brabus.
You compromise on standard
Because you were trying to satisfy your client.
Try to dey walk away sometimes.
Once you know say these kind thing go bring issues that touch

somehow:


Where best to buy from and what's their average delivery time?

Do I start now or when is best?

May likely start finishing between 2 and 6 months time.

@Twinskenny

Greenarrow01:


Obviously it is a campaign to tarnish his image.
It is obviously a campaign

He said brabus used 0.33 thickness
And nobody produces those thickness

This is obviously a case of

Brabus delivering what a client wanted and it ended up backfiring.


Cos from all these stories

Client wanted a particular design which brabus knows will end up spoiling the whole project. Brabus still went ahead to do it.

I will blame brabus here.
No b everything wey client want, na him dem dey do.
If you can't do it
Walk away.


If that work is going to cause health or any other form of hazard na so you for enter am because you were trying to do what man wanted.

Secondly
3strikes is just looking for revenge.
From the screenshot you posted earlier, you lied.
At no point did abdulwatex affirmed that brabus used 0.33
Na you talk am. And you were clearly wrong as there is no 0.33.

But the blame is on brabus.
You compromise on standard
Because you were trying to satisfy your client.
Try to dey walk away sometimes.
Once you know say these kind thing go bring issues that touch

Really by doing exactly what the drawing specify.

Did you read the part where I said I advised the client on the roof design and how he told me to go and do it his way?

He went ahead and tell the architect who designed the house to come and explain how to do the roof

Who am I not to give him exactly what the drawing, the client, the architect wanted?

On what ground should I do something contrary?

Walking away is not an option because obviously I’m the one who is breaching an agreement.

The scope of work includes roofing a house. So all the excuse of the roof design won’t work or not is not my headache.

It would be if I designed the house or doing something contrary to the original design.

3strikes:
My mission on this subject matter is accomplished for now. I bet there are few Diasporans who have stumbled on this thread and have decided how they wanna proceed. You have been warned. Stay away from Brabus /N3xt/Bosun and any of his affiliation.

Now let me get back to serious business. Abeg I dey find cheap lands to buy and hold o or a distressed property.

thanks in advance

I am one of those 'Diasporans'.

Thanks for looking out but, honestly, you have thrown a lot of allegations which have seemingly been comprehensively refuted.

Or, from where I sit, any remaining greviance is easily resolved offline if personalities have not come into play. Certainly not commensurate to the campaign being waged here against Brabus.

So, in conclusion, I will use him if opportuned - if only from the evidence of the information he willingly shares. I'm no mug and please don't automatically class me as a 'supporter' or member of some clique. I work with my own assessment.

Again, thanks for looking out. It would be great if you now gave this forum over to the purpose it was set up for - to learn.

Naijapal:


Is this to say, there used to be 0.33 gauge back then and they stopped producing after a while?

I’ve never used step tiles, only long span and I know that there’s .45 and .55, BUT there was a lower gauge than .45 that I forgot (I think .35) and BUT BUT some will sell .45 at .55 price, I was almost a victim.

You and I both know that there are roofers on here that can answer this question immediately and totally but no one wants to enter an unemptied laterine

BrabusNG:


Children of God don’t lie

I got worried when you chose to let down the guy whom you never meet that was there for you all through your project (from land purchase to house warming) just because you wanted to prove brabus was wrong and you’re right.

You don’t even know your land and you got something worthwhile.

What’s his offense?

He supported brabus when hypocrites who have no idea of the journey were supporting you.

It’s well o! Karma is a b*tch.

I saw this post and I just have to smile.

Less than 11m for a 3 floor building in Lagos, Nigeria is not a small feat. I remain Brabus.

Which was true. The experience is everything!. I still dey feel the experience till date especially when i had to change roof 3 times and redo the wood work. I don forgive you na why i said, I don't need any apology. All these your screenshots no make any sense. All I'm asking is to stop gloating about my project as if you did everything right.....Don't mention me in your business if you don't want my responses. how hard is that?

By the way I have no issues at all with Kaflex.

Greenarrow01:


Obviously it is a campaign to tarnish his image.
It is obviously a campaign

He said brabus used 0.33 thickness
And nobody produces those thickness

This is obviously a case of

Brabus delivering what a client wanted and it ended up backfiring.


Cos from all these stories

Client wanted a particular design which brabus knows will end up spoiling the whole project. Brabus still went ahead to do it.

I will blame brabus here.
No b everything wey client want, na him dem dey do.
If you can't do it
Walk away.


If that work is going to cause health or any other form of hazard na so you for enter am because you were trying to do what man wanted.

Secondly
3strikes is just looking for revenge.
From the screenshot you posted earlier, you lied.
At no point did abdulwatex affirmed that brabus used 0.33
Na you talk am. And you were clearly wrong as there is no 0.33.

But the blame is on brabus.
You compromise on standard
Because you were trying to satisfy your client.
Try to dey walk away sometimes.
Once you know say these kind thing go bring issues that touch

100% right. Nothing to add.

BrabusNG:


Really by doing exactly what the drawing specify.

Did you read the part where I said I advised the client on the roof design and how he told me to go and do it his way?

He went ahead and tell the architect who designed the house to come and explain how to do the roof

Who am I not to give him exactly what the drawing, the client, the architect wanted?

On what ground should I do something contrary?

Walking away is not an option because obviously I’m the one who is breaching an agreement.

The scope of work includes roofing a house. So all the excuse of the roof design won’t work or not is not my headache.

It would be if I designed the house or doing something contrary to the original design.

I get your point
Sometimes
Clients self dey get headache.
Going forward
When next something like this happens
Pls organise a meeting between all parties involved and point out the flaws.
This way. You won't end up taking blames.


If you really used 0.55 stepp tiles
And worked according to the design then you no too get fault sha.

Cos come to look at it
.the second and third re roofing had issues solely because of the woodwork.
And no b say the woodwork get nails wey dey spoil the step tiles any how.
Na just the design aid the quick spoilage.


Brabus.
Sit for like 10 minute with a chilled bottle of bear and look at this work from a neutral point of view and also from 3strikes point of view.
You might pick up a lesson or two.


3strikes pls look at this issue from contractor point of view and a neutral point. You will pick up lessons. Too

If brabus really used 0.55 then you will agree that the design is the culprit here.

Greenarrow01:


Obviously it is a campaign to tarnish his image.
It is obviously a campaign

He said brabus used 0.33 thickness
And nobody produces those thickness

This is obviously a case of

Brabus delivering what a client wanted and it ended up backfiring.


Cos from all these stories

Client wanted a particular design which brabus knows will end up spoiling the whole project. Brabus still went ahead to do it.

I will blame brabus here.
No b everything wey client want, na him dem dey do.
If you can't do it
Walk away.


If that work is going to cause health or any other form of hazard na so you for enter am because you were trying to do what man wanted.

Secondly
3strikes is just looking for revenge.
From the screenshot you posted earlier, you lied.
At no point did abdulwatex affirmed that brabus used 0.33
Na you talk am. And you were clearly wrong as there is no 0.33.

But the blame is on brabus.
You compromise on standard
Because you were trying to satisfy your client.
Try to dey walk away sometimes.
Once you know say these kind thing go bring issues that touch

too bad and immature. Shows he has a personal vendetta against Bosun., but it has back fired when he lied of bosun using 0.33 Guage. Roof was subsequently done 3 times na brabus do am? . We know how to read between the lines. A pity seems seven years is a long time to carry a grudge

Greenarrow01:

I get your point
Sometimes
Clients self dey get headache.
Going forward
When next something like this happens
Pls organise a meeting between all parties involved and point out the flaws.
This way. You won't end up taking blames.


If you really used 0.55 stepp tiles
And worked according to the design then you no too get fault sha.

Cos come to look at it
.the second and third re roofing had issues solely because of the woodwork.
And no b say the woodwork get nails wey dey spoil the step tiles any how.
Na just the design aid the quick spoilage.


Brabus.
Sit for like 10 minute with a chilled bottle of bear and look at this work from a neutral point of view and also from 3strikes point of view.
You might pick up a lesson or two.


3strikes pls look at this issue from contractor point of view and a neutral point. You will pick up lessons. Too

If brabus really used 0.55 then you will agree that the design is the culprit here.

I have quick question. Is this a step tile? this is what he used for me and the gauge is 0.33 while the quote said he will be using 0.55 step tiles.


So is this step tiles as agreed in the quote?

EgunMogaji2:


Oya oga mi teach us nau

There's nothing to teach about it......

An Ante-room is simply a "Waiting room".
A Waiting room where you receive visitors you don't want to gain entrance into the Lounge or rather Parlour which is archaic in usage. The other is that it's supposed to shed the property owner from his/her visitors when gaining entrance into the build rather than using a back door. What people refer to as a mini lounge is what it can be likened to. It's in the placement of the design that makes it what it is


What many do have and have come to accept as Ante-room is an open space/corner which serves as (main) lobby in gaining entrance into the (main)building accessing the lounge and other sections of the building.

3strikes:




I have quick question. Is this a step tile? this is what he used for me and the gauge is 0.33 while the quote said he will be using 0.55 step tiles.


So is this step tiles as agreed in the quote?

Another angle.
This is no step tiles at all
.let him come and talk on this

3strikes:




I have quick question. Is this a step tile? this is what he used for me and the gauge is 0.33 while the quote said he will be using 0.55 step tiles.


So is this step tiles as agreed in the quote?

post the complete roof why taking pics of the hidden roof? Post the whole roof let's see.

3strikes:




So is this step tiles as agreed in the quote?

Let me put it out well:

Is this step tile?

Cc:
Money121
KolaShangOne
Spyder880
Brabus

Greenarrow01:


Another angle.
This is no step tiles at all
.let him come and talk on this

this is not the complete roof. Let him post the pics of the complete roof let's see

Greenarrow01:


Another angle.
This is no step tiles at all
.let him come and talk on this

So that's what he used and it was 0.33 gauge as confirmed by all the roofers.

3strikes:



So that's what he used and it was 0.33 gauge as confirmed by all the roofers.

oga this WhatsApp chat is neither here or there. Post the complete roof where you claim 0.33 Guage was used.

DUNKA:
too bad and immature. Shows he has a personal vendetta against Bosun., but it has back fired when he lied of bosun using 0.33 Guage. [b]Roof was subsequently done 3 times na brabus do am? ;[/b]D. We know how to read between the lines. A pity seems seven years is a long time to carry a grudge

At the bolded ... It could also mean the roof has been partly replaced 3 times. Maybe u can wait for him to explain better.

3strikes:




I have quick question. Is this a step tile? this is what he used for me and the gauge is 0.33 while the quote said he will be using 0.55 step tiles.


So is this step tiles as agreed in the quote?

Please show picture of Sir 3strikes step tiles if it’s different from what you shared.

It’s no longer step tiles because you workmen stepped on it while plastering your house.

I advised you but you say “Do my job my way!”

Post the picture of when plastering was done with planks placed on your roof.

_____

Bros go and take a bottle of beer greenarrow1 recommended for me. I dey work now I can’t drink and work.

_____

You’re just messing yourself here bro. What you posted is step tiles roofing. Ask any company in Nigeria to prove me wrong

Structural Engineers

Here’s 3strikes roof plan, please tell him the implication of having a parapet wall without a roof gutter.

As a baba lati, he won’t listen to me.

And if you feel this would work, kindly show me how?

I want to learn this evening.

DUNKA:
this is not the complete roof. Let him post the pics of the complete roof let's see

Another Brabus's handle. How did you know if you are not brabus?

3strikes:



Another Brabus's handle. How did you know if you are not brabus?

I am Brabus. are you satisfied?

3strikes:



So that's what he used and it was 0.33 gauge as confirmed by all the roofers.

This is not step tiles

But bro
Pls don't post this screenshot pls
This is not a confirmation that the roofer here told you that it is 0.33
Na you dey talk am here.
Not the roofer telling you

BrabusNG:


Is that all you’ve got?

Brabus underquote to build a 3 floor building for you with just N12m

Anyway, did you pay him extra money on your build?

Was the project delivered within schedule or not?

May I remind you of your pickup line when you called me... You seem to have forgotten how much you begged me and how you told me the stories of....

You seem to have forgotten your message to me when I completed your raft with meagre 2.5m using my marine boards and my dump truck to deliver sand. You’ve forgotten how you jumped for joy and told me you’ve never believed raft won’t cost less than 4.5m and how you’ve been watching closely to see if I’m not cutting corners.

I can send you screenshots of some of your msgs though to refresh your memory or maybe you ask Kazeem

____

At what point did you realize Brabus work was unsatisfactory? Remember he doesn’t take money for a new milestone until the client is satisfied with the one paid for.

Was it at the beginning or the middle or at the very end after he has delivered and moved on?

Or you were saving it up??

The gullible ones will buy your stories.

____

Please stop doing this in front of your kids o because All liars will become a thief

____

I gave you the f*cking house you begged me for. At least give me some credit na


_____
If I don’t respect clients confidentiality, I’d have leveled up bro. I’ll make you popular for the wrong reasons.

Remember you said you will kill my friend, my wife and my children and you sent your squad after them.

Does it look like I was begging for this? here is why people in diaspora are very reluctant to trust Naija contractors. I have an harddrive for this project and all my conversation with everyone. I just want to burst your bubbles on this . Anyways, Here below is our conversation where you were begging me for this work. You are just a liar!

Nero2424:


At the bolded ... It could also mean the roof has been partly replaced 3 times. Maybe u can wait for him to explain better.

You may be right sir.

It might mean the fictitious 0.33 gauge supposed non step tiles in 3strikes wildest imagination was changed thrice.

The only problem is establishing that

1. There’s a company in Nigeria that produces 0.33 gauge roofing. Maybe the company was established by those who are supporting this

2. The roofing sheet is not step tiles if 3strike or any of his supporters can show us picture of step tiles roofing sheet different from the ones in the image.


Nairaland drama.

@3strikes I'll suggest a solution to the challenge you're facing with that roof. Even if you use 1million gauge roofing sheet, it will still leak at the overlap points in the hidden roof when the volume of water is much (rain from top roof + rain at hidden roof).
1) the slope at the hidden roof is not right
2) a gutter t the top roof, with collection outside the the hidden roof, will reduce the volume of water at the hidden roof.

Baba na you dey do nairaland dance for public square like this.

Go and rest o!

0.33 guage step tiles by 3strikes Nigeria Ltd.

BrabusNG:
Baba na you dey do nairaland dance for public square like this.

Go and rest o!

0.33 guage step tiles by 3strikes Nigeria Ltd.

I just want everyone to truly see you for who you are ( A fraudster).

3strikes:



I just want everyone to truly see you for who you are ( A fraudster).

You’ve made your point.

A fictitious 0.33 gauge step tiles roofing that was fabricated by a company that only your nairaland dumb supporters knew of was used on your project.

I’d suggest you sit down relax and learn how big boys do stuffs.

Maintenance free roofing coming up in a bit.

Gimme like 3 weeks from now and see how it’s done.

#AdvancedBabaLati in the building
_______

Even a dumb person can spot the difference in the structural drawing I shared here and yours.

3strikes:



I just want everyone to truly see you for who you are ( A fraudster).

and we have now know that you are deceitful,vengeful and a liar

DUNKA:
and we have now know that you are deceitful,vengeful and a liar

ouch that hurts my feelings.....I just don't like fraudster.