Deputy01:
As the use of prepaid meter is gradually taken over the electricity industry so also is the rise in trouble using the prepaid meter device. This article gives a detailed explanation of how to load a token on CONLOG PREPAID METER and how to rectify a mistake.
This article was born out of a personal experience. My brother was asked to load the prepaid meter of the church and he called me to give him directives on how to go about it and I told him I don't know how to do it except if I search around on Google. Unfortunately, he tried the directive of the Pastor and it caused an error that reverted a message that said "please register the meter".
The vendor of the Prepaid token was contacted and the rectification process was initiated which I will explain later in the article.
Note: you can not load your prepaid token when there is no power i.e when "Re con" is on the display.
Steps to load your purchased prepaid meter token.
1. Input the 11 digit meter number and wait for some seconds
2. Input the 20 digit token to activate your prepaid meter (just input the 20digit and wait)
My brother thought since there was no visible enter button so # must be the enter button and that caused the machine to send back error code.
Follow the following step to rectify the error if you ever make the same mistake
1. On request, your vendor will send 20digits code in two places.
2. Input the 11 digit meter number
3. Input the first 20 digit
4. Input the second 20 digit and you should see "DONE" displayed which implies that the error has been rubbed off.

After this step, you can go back to the first step and your prepaid meter will be activated.

Thanks for reading.
Like, and comment if it was helpful, and share to help others who may need this.

whales2200:


I am still having issues with my Conlog meters.
The 40 digits activation or the 20 digits vended token for recharge.. none is working... I get an "AAAAAAA" error once I enter any of the 20 digits..
Its so frustrating.. the 100 units preloaded will soon finish..
If anyone has a way out please share

oluwafreshkid:


Please how did youv solve this as I'm currently facing same issue

whales2200:


For new conlog meters
Goto http://kctmanagement.conlog.com , Enter your meter number to generate your activation codes which are usually two 20 digits. Enter the first 20 digits and wait for a response "CCH" enter the remaining 20 digits then you get "CCH done".

You can now load your already vended token.
Thanks

whales2200:


I am still having issues with my Conlog meters.
The 40 digits activation or the 20 digits vended token for recharge.. none is working... I get an "AAAAAAA" error once I enter any of the 20 digits..
Its so frustrating.. the 100 units preloaded will soon finish..
If anyone has a way out please share

whales2200:


For new conlog meters
Goto http://kctmanagement.conlog.com , Enter your meter number to generate your activation codes which are usually two 20 digits. Enter the first 20 digits and wait for a response "CCH" enter the remaining 20 digits then you get "CCH done".

You can now load your already vended token.
Thanks

whales2200:


I am still having issues with my Conlog meters.
The 40 digits activation or the 20 digits vended token for recharge.. none is working... I get an "AAAAAAA" error once I enter any of the 20 digits..
Its so frustrating.. the 100 units preloaded will soon finish..
If anyone has a way out please share

kayneonline:
Please I . Having this AAAAAAAAAA error code on my Conlog prepaid meter.


Please kindly assist if you know how to load successfully.

NB: Its my 1st recharge

Crackow12:


I got mine fixed today. Had to chat them on WhatsApp and was directed to a chat bot. It was quite easy. I was sent a new token on my phone number and everything was rectified.

Their WhatsApp number: 09088951626

biosepeter1:


I followed your instructions... and The live chat I had... They said they will send me a token b4 24 hours...so I await The message..
The question I Wana ask is... The token sent to you...was it via email or SMS And if sms... is it The number you put in when chatting with The live chat or The One registered to with The meter..

Crackow12:


SMS. The number registered with the meter

Crackow12:


SMS. The number registered with the meter

biosepeter1:

Okay thanks...
I have received Their message...
Please how do I go about punching it...is there any code u used before Putin them

Crackow12:


I got mine fixed today. Had to chat them on WhatsApp and was directed to a chat bot. It was quite easy. I was sent a new token on my phone number and everything was rectified.

Their WhatsApp number: 09088951626

desmag1:
My question please, how many token did you receive? Is it 2 token numbers?. Also how long does it takes them to send the token?

Crackow12:


I got mine fixed today. Had to chat them on WhatsApp and was directed to a chat bot. It was quite easy. I was sent a new token on my phone number and everything was rectified.

Their WhatsApp number: 09088951626

Freespirits:


Please Sir, is it this same new token you are to use for subsequent recharges? I mean do you have to punch in the same two(20 digits) before you punch in your recharge token everytime you need to recharge?

Deputy01:
As the use of prepaid meter is gradually taken over the electricity industry so also is the rise in trouble using the prepaid meter device. This article gives a detailed explanation of how to load a token on CONLOG PREPAID METER and how to rectify a mistake.
This article was born out of a personal experience. My brother was asked to load the prepaid meter of the church and he called me to give him directives on how to go about it and I told him I don't know how to do it except if I search around on Google. Unfortunately, he tried the directive of the Pastor and it caused an error that reverted a message that said "please register the meter".
The vendor of the Prepaid token was contacted and the rectification process was initiated which I will explain later in the article.
Note: you can not load your prepaid token when there is no power i.e when "Re con" is on the display.
Steps to load your purchased prepaid meter token.
1. Input the 11 digit meter number and wait for some seconds
2. Input the 20 digit token to activate your prepaid meter (just input the 20digit and wait)
My brother thought since there was no visible enter button so # must be the enter button and that caused the machine to send back error code.
Follow the following step to rectify the error if you ever make the same mistake
1. On request, your vendor will send 20digits code in two places.
2. Input the 11 digit meter number
3. Input the first 20 digit
4. Input the second 20 digit and you should see "DONE" displayed which implies that the error has been rubbed off.

After this step, you can go back to the first step and your prepaid meter will be activated.

Thanks for reading.
Like, and comment if it was helpful, and share to help others who may need this.

oluwafreshkid:

I've gotten the both 20 digits.
I keep getting AAAAAaaaa error code

khatea:


Gud afternoon. Pls, I'm having this same issue at d moment after inputting the two - 20digits. Have u been able to sort urs? If yes, pls, direct me on wat to do. Fnx

khatea:


Gud afternoon. Pls, I'm having this same issue at d moment after inputting the two - 20digits. Have u been able to sort urs? If yes, pls, direct me on wat to do. Fnx

oluwafreshkid:

Hello Esteemed Customer, Kindly follow the steps below to load token on your prepaid meter. Step 1: Please ensure that you have strong alkaline batteries behind the box. Step 2: Please confirm there is power supply in the area. Step 3: Also confirm your change-over box is on Ikeja Electric and not on generator or any other power source. Step 4: Input your meter number then press the # key. Step 5: Input the token digits then press the # key.

whales2200:


For new conlog meters
Goto http://kctmanagement.conlog.com , Enter your meter number to generate your activation codes which are usually two 20 digits. Enter the first 20 digits and wait for a response "CCH" enter the remaining 20 digits then you get "CCH done".

You can now load your already vended token.
Thanks