DUNKA:
a 3 storey of 2 units per floor of 2 bedroom apartments

you need a tank stand with at least six tanks. One tank for each flat.

6 tanks of 500 gallons will do a good job

michlins:
you need a tank stand with at least six tanks. One tank for each flat.

6 tanks of 500 gallons will do a good job

will the 5 x 3 H Channels earlier quoted be sufficient and how many lengths?

DUNKA:
will the 5 x 3 H Channels earlier quoted be sufficient and how many lengths?

not anymore. We're talking about 8 by 4 for four legs or 6 by 3 for six legs

It has been long since I posted about this gate but work has been constantly going on.

This is the condition as at this morning

By this evening when everything concerning the welding was done with, I had to raise it from the ground.


Moving forward, this gate is extremely delicate as the spices are breakable. It will stand like this until it's delivered

More pictures of the gate

Michlin can I get your contact.Need a tank stand constructed ASAP.

nonnyah:
Michlin can I get your contact.Need a tank stand constructed ASAP.

07032fourfour6904 is my contact

This job is already completed and now enroute to site this evening. Thanks to y'all that followed me on this journey.

I hope we do it again.


I'm hoping to get more pictures when it's hanged on site

The pictures don't do real justice as to how gorgeous this gate is.


Personally I believe this is the most beautiful gate I have made in recent memory

Beautiful gate Michlins.

Please, what size of GP tank will be adequate for 6 to 8 occupants in a bungalow.
2ndly, can i get material cost for the tank stand using galvanised pipe. Thanks

soonest:
Beautiful gate Michlins.

Please, what size of GP tank will be adequate for 6 to 8 occupants in a bungalow.
2ndly, can i get material cost for the tank stand using galvanised pipe. Thanks

thanks for the compliments. About the tank, I will suggest you use H channel. Even if it's 5 by 3. Do 15ft tank stand. It should carry two(2) 750 gallons on top and another 500 gallons at the down.


Don't risk your project with galvanized pipes. See this failure. A Nairalander shared the project with me

Thanks for your reply. Please how much will it cost using 5 by 3

soonest:
Thanks for your reply. Please how much will it cost using 5 by 3

budget upwards of 500,000

michlins:
thanks for the compliments. About the tank, I will suggest you use H channel. Even if it's 5 by 3. Do 15ft tank stand. It should carry two(2) 750 gallons on top and another 500 gallons at the down.


Don't risk your project with galvanized pipes. See this failure. A Nairalander shared the project with me

This looks links 6by3 H-Channel iron.
Most Possible cause of collapse could be Overload.

Martini101:

This looks links 6by3 H-Channel iron.
Most Possible cause of collapse could be Overload.

nope that's 4 by 2 H channel and pipe. 1½" pipe

Finally we have the gate standing in full glory. Although there's a little variation on color reproduction which the client pointed out and we will be taking care of in no distance time.

Aside that, he's impressed by the quality, timely and accurate reproduction of his job

[quote author=michlins post=101963794][/quote]
Goodday, pls sir I will like to know the list of materials to use for a designer door n total cost of materials.. Thanks

[quote author=michlins post=101963794][/quote]
Goodday, pls sir I will like to know the list of materials to use for a designer door n total cost of materials. For 6" wall. Thanks

haryodehjia:

Goodday, pls sir I will like to know the list of materials to use for a designer door n total cost of materials.. Thanks

good day sir

Here are the materials

3 by 1½ pipe. I prefer using 1.5mm instead of 1mm

18 guage prefabricated design pan

18 gauge frame. (Can be made in different sizes from 4" to 12"

Foreign bolt and hinges

Other things like body filler, paint,electrodes and stuff like that

michlins:
good day sir

Here are the materials

3 by 1½ pipe. I prefer using 1.5mm instead of 1mm

18 guage prefabricated design pan

18 gauge frame. (Can be made in different sizes from 4" to 12"

Foreign bolt and hinges

Other things like body filler, paint,electrodes and stuff like that

Thank u sir I appreciate

Hi Michlins,
Kindly help with an estimate of the total cost of producing a 4x4 ft of this burglary proof using a 12mm rod and angle bar for the frame.
Thanks.

Beframia:
Hi Michlins,
Kindly help with an estimate of the total cost of producing a 4x4 ft of this burglary proof using a 12mm rod and angle bar for the frame.
Thanks.

quantity of the job and I want to know if this is square rods you want

10 pcs is needed, check for both square and circular rods.
Thanks.

michlins:
quantity of the job and I want to know if this is square rods you want

Beframia:

10 pcs is needed, check for both square and circular rods.
Thanks.

budget like 14,000 for one

Ok.
Thanks bro.

michlins:
budget like 14,000 for one

I need a beautiful and very strong front door 4by 7 and a very strong back door. What design would you give me and at what price?

My location is Makurdi. What is the cost of sending them to Makurdi and how long will it take you to finish it?

Rexology:
I need a beautiful and very strong front door 4by 7 and a very strong back door. What design would you give me and at what price?

My location is Makurdi. What is the cost of sending them to Makurdi and how long will it take you to finish it?

good morning sir


Let me confirm if there's a direct bus going to Benue State from Nnewi and I will get back to you. To charter a bus for a single door will not be good idea economically

michlins:
good morning sir


Let me confirm if there's a direct bus going to Benue State from Nnewi and I will get back to you. To charter a bus for a single door will not be good idea economically

Okay!

Rexology:
Okay!

good evening sir, I haven't been able to get a direct bus going from Nnewi to Makurdi. I can charter a truck but it's going to be expensive being that it's taking only two doors. I'm really sorry about it sir

michlins:
good evening sir, I haven't been able to get a direct bus going from Nnewi to Makurdi. I can charter a truck but it's going to be expensive being that it's taking only two doors. I'm really sorry about it sir

No wahala, I will look around here. Thank you!

Rexology:

No wahala, I will look around here. Thank you!

thanks for calling on me. I do hope we're able to do business in future