Am creating this thread to show case our conduit and surface system of piping.

Feel free to comment ask question, Below are some steps for surface slab piping

Laying of Lighting Pipes around a Beam
• Use of blue line to determine the route up to the edge of the beam
• Vertically place a plumb to transfer the line to the base of the beam
• Horizontally place the plumb at the base of the beam to transfer the line to the other side of the beam
• Then vertically place a plumb at the other side to transfer the line to the base of the beam.
• Blue line is use to transfer the line to other lighting point locations on a straight line
• Transfer the measurements to the pipes
• The vertical length of the beam gives the bending radius of the pipes
• Use the bending spring to achieve the bending radius
• Fixing of the bent pipes around the beam
• The pipes are linked together with couplers
• Adaptable boxes to be used where many pipes are crossing each other
• Linking of pipes to distribution boards.


Contact us today for your Electrical Mechanical Design and Installation

Check out our thread

Distribution boards
https://www.nairaland.com/2668061/abb-distibution-board-schneider-distribution/6

MEP installation
https://www.nairaland.com/1233943/contact-us-electrical-mechanical-plumbing/25

Cables
https://www.nairaland.com/2326721/nigerchin-kabelmetal-coleman-cables/23

More pictures

We are second to none when it comes to neat and well arranged pipe installation

You will only get the best from us

Thanks for your calls

Our conduit and surface pipe work is second to none

Happy Sunday to you all

Happy.new week ahead

Call us today for your surface piping

topsy23:
We are second to none when it comes to neat and well arranged pipe installation

I believe this.

Happy Eid-Mubarak to all our esteemed Muslim clients

Happy Sallah ,
I need help . For a 3bedroom flat ,1 tv , 3 Ac ,2 water heater ,fan and fridge. Please what is the quantity of wire I should be expecting to buy .

Thanks Oga mi

topsy23:
Happy Eid-Mubarak to all our esteemed Muslim clients

Enyinne:
Happy Sallah ,
I need help . For a 3bedroom flat ,1 tv , 3 Ac ,2 water heater ,fan and fridge. Please what is the quantity of wire I should be expecting to buy .

Thanks Oga mi

Below is the quantity of cables needed

1.5mm for lighting, ceiling fan, extractor fan
Red. 4
Black 3
Green 2

2.5mm for socket
Red 2
Black 2
1.5mm green 2

4mm for AC and water heater
Red. 2
Black 2
2.5mm green 2

10mm
Red 1
Black 20m

Thank u sir

topsy23:


Below is the quantity of cables needed

1.5mm for lighting, ceiling fan, extractor fan
Red. 4
Black 3
Green 2

2.5mm for socket
Red 2
Black 2
1.5mm green 2

4mm for AC and water heater
Red. 2
Black 2
2.5mm green 2

10mm
Red 1
Black 20m

Enyinne:
Thank u sir

You are welcome

Happy weekend

Sir , if i hv plan to have solar power in the house ,what should i add more to take it into consideration . Hope to hear from u .thanks

topsy23:


You are welcome

Enyinne:
Sir , if i hv plan to have solar power in the house ,what should i add more to take it into consideration . Hope to hear from u .thanks

That means you need to add additional small single phase distribution board like or 6ways

So that 80or 90% of light will be in solar and some selected socket .

1.5mm for lighting, ceiling fan, extractor fan + external light
Red. 5
Black 4
Green 2

2.5mm for socket
Red 2
Black 2
1.5mm green 2

4mm for AC and water heater
Red. 2
Black 2
2.5mm green 2

10mm
Red 1
Black 20m

6mm 3-core for inverter 30m

And let your electrician provide a by-pass for the inverter in- case the solar inverter is ready to be installed or faulty so that all the light will be working on grid/generator

Thanks . Pls do u hv a good electrician that can do this job .
A flat of 3bedroom out of 4 flats. Fixing only 1 flat now to move in .
Location Ajah

topsy23:


That means you need to add additional small single phase distribution board like or 6ways

So that 80or 90% of light will be in solar and some selected socket .

1.5mm for lighting, ceiling fan, extractor fan + external light
Red. 5
Black 4
Green 2

2.5mm for socket
Red 2
Black 2
1.5mm green 2

4mm for AC and water heater
Red. 2
Black 2
2.5mm green 2

10mm
Red 1
Black 20m

6mm 3-core for inverter 30m

And let your electrician provide a by-pass for the inverter in- case the solar inverter is ready to be installed or faulty so that all the light will be working on grid/generator

Enyinne:
Thanks . Pls do u hv a good electrician that can do this job .
A flat of 3bedroom out of 4 flats. Fixing only 1 flat now to move in .
Location Ajah

You mean my workers

A good electrician that can do it . The job is at Sangotedo. I don't know ur location.?
If your company can do it , we can discuss over it

topsy23:


You mean my workers

Enyinne:
A good electrician that can do it . The job is at Sangotedo. I don't know ur location.?
If your company can do it , we can discuss over it

We can handle it for you.

You can send me the plan on whatsapp

You carry out the MEP design and construction right ?

Mykel51:
You carry out the MEP design and construction right ?

Yes sir
Design and build

Mykel51:
You carry out the MEP design and construction right ?

Good morning sir

@topsy23,

What quantities (rough estimates) of cables will be needed for wiring 2 Units of 2 beds and 5 Units of mini flat. ?

Let's see if we can do something together.


Thanks

folmus:
@topsy23,

What quantities (rough estimates) of cables will be needed for wiring 2 Units of 2 beds and 5 Units of mini flat. ?

Let's see if we can do something together.


Thanks

Thanks for the message

For 2units of 2bedroom flat below is the list of cables needed

1.5mm
Red. 4
Black 3

2.5mm
Red 3
Black 3
1.5mm green 3

4mm for AC
Red 2
Black 2
2.5mm green 2

For 5-units of mini flat i.e room and a sitting
1.5mm
Red 6
Black 6

2.5mm
Red 4
Black 4
1.5mm green 4

4mm
Red 3
Black 3
2.5mm green 3

6mm for DB for single phase DB
Red 1
Black 1
Green 4mm 1

Above depends on number of AC

On going surface pipe work

More picture

topsy23:
Am creating this thread to show case our conduit and surface system of piping.

Feel free to comment ask question, Below are some steps for surface slab piping

Laying of Lighting Pipes around a Beam
• Use of blue line to determine the route up to the edge of the beam
• Vertically place a plumb to transfer the line to the base of the beam
• Horizontally place the plumb at the base of the beam to transfer the line to the other side of the beam
• Then vertically place a plumb at the other side to transfer the line to the base of the beam.
• Blue line is use to transfer the line to other lighting point locations on a straight line
• Transfer the measurements to the pipes
• The vertical length of the beam gives the bending radius of the pipes
• Use the bending spring to achieve the bending radius
• Fixing of the bent pipes around the beam
• The pipes are linked together with couplers
• Adaptable boxes to be used where many pipes are crossing each other
• Linking of pipes to distribution boards.


Contact us today for your Electrical Mechanical Design and Installation

Check out our thread

Distribution boards
https://www.nairaland.com/2668061/abb-distibution-board-schneider-distribution/6

MEP installation
https://www.nairaland.com/1233943/contact-us-electrical-mechanical-plumbing/25

Cables
https://www.nairaland.com/2326721/nigerchin-kabelmetal-coleman-cables/23

this is great, I just discover this thread and it's really educative, as a young electrical technician/engineer I thought I have known almost all about electrical piping before but your jobs makes me realize I still have a lot to learn, you are doing a great job sir.

Abiola365:
this is great, I just discover this thread and it's really educative, as a young electrical technician/engineer I thought I have known almost all about electrical piping before but your jobs makes me realize I still have a lot to learn, you are doing a great job sir.

Thanks for your comment

Decking pipe work