dollarnaira:


Truth being said.
If d above yellow Alimate is your battery be rest assured it might b far less dan 100A. Lets assume it is a 100amp battery. Parallel connection give 200amp which in essence it is actually 100amp at 50% DOD. Now lets say it is not fully 100A each.Hmmmm....guess my mind bro. Lastly, b rest assure that your load is not even up to the rated Watt. Only energy meter can give ur true wattage. My tv e.g is 50w but meter reads 34w. The 50w is maximum wen all settings are at maximum e.g contrast, brightness, volume etc. Your bulbs to might be higher than that. Now , add d idle consumption of 30w to the untrue 100A ba3.

My Souer 1000w inverter (msw) takes just 1.1w while my 1600w psw uses 1w idle consumption.

oloet:

good day, what brand is your pure sine wave inverter

dollarnaira:

No brand But the above was debunked.

dollarnaira:

No brand But the above was debunked.

ceaser:


And think of selling off a kidney first.

Na frustrations from Nigerian customs and devilish import duty will make one tire.



Good way to go about it.

ceaser:


Abeg Ojes, LFP price don come down? Because I used to know 12v/100ah to be around 140k to 150k o.


It's like you forgot to calculate the price of BMS and enclosure with it.



This is seriously annoying. This is even worse than being sold a lemon. Why not let a client know the options available and then let them make an informed choice? Sadly we can't purchase panels directly ourselves from overseas or even buy solar cells and DIY like it can be done with Lithium batteries. It would have cut down chances of falling into the hands of these fraudsters.

Inverters, Lithium cells, controllers, switches, meters can all be personally ordered from reputable manufacturers and bypass fraudulent middle marketers. But solar panels, no hope yet.

I guess we still have to hope reputable dealers maintain their reputation and sincerity.

smallsmall:
Good Morning House.

Does anyone have an idea of how l can 'wake up' a LifePo4 Battery bank (DIY), without the use of a Light Board

or alternatively, where l can get a light board, without having to order it all the way from China?

Thanks in advance

smallsmall:
Good Morning House.

Does anyone have an idea of how l can 'wake up' a LifePo4 Battery bank (DIY), without the use of a Light Board

or alternatively, where l can get a light board, without having to order it all the way from China?

Thanks in advance

oloet:
please I need 12v pure sine wave inverter suggestions with low watts consumption

smallsmall:
Good Morning House.

Does anyone have an idea of how l can 'wake up' a LifePo4 Battery bank (DIY), without the use of a Light Board

or alternatively, where l can get a light board, without having to order it all the way from China?

Thanks in advance

oloet:
please I need 12v pure sine wave inverter suggestions with low watts consumption

mustaphagreens:


I never get a full charge. Is my charge controller fake?

Dishtech:

The down side of lithium battery or any other batteries is discharging it below safe value. Lithium battery should not be discharged below 2.5v and 2.84-3v for LiFeO4 and lithium ion batteries respectively. In making a diy battery, measure must be in place to check the undervoltage. Your battery may be dead, check each individual cell voltage if they are not below 1.5v they is chance of waking up. Charge individual cell with 4volt while observing the progress.
Secondly what do you mean by light board? Is it the BMS board?

earthrealm:


Only daly uses lightboard. The device with battery icon is the lightboard.
Confirm your bms is daly.
Do you have the bluetooth dongle?.
You should have that at least. Check if it has a dot at the end of the word bluetooth. That black or shiny dot is a button and can help you wake the bms up.

If you dont have that..disconnect the load from the bms..and touch the P- and B- cable...it should turn on the bms, if the cell voltage is above bms cutoff.

Oshomo12:
Happy new year my people!!

Michaelondon53:
Happy New Year all!

Please my inverter last night is screaming short circuit and it’s green light is turning red when ever I switch it on. And I could perceive something burnt the second time I tried to test it!. Please house what can I do, I need light this new year oo

generalstingz:
Still available

16 units of 100AH 3.2V Great Power LFP cells


@ 27,000 per cell

Michaelondon53:
Happy New Year all!

Please my inverter last night is screaming short circuit and it’s green light is turning red when ever I switch it on. And I could perceive something burnt the second time I tried to test it!. Please house what can I do, I need light this new year oo

odimbannamdi:


Chat me up on whatsapp, my offer may interest you.

ewizard1:

Blown Mosfets... The inverter needs to see an Engineer.

The more you restart, more mosfets blow up.

Michaelondon53:


Thanks for your prompt reply, but what is the cause of this blown mosfets, kind you this is a new inverter! Haus strom inverter, does the warranty cover such issues?

isangjohnson:
QUESTION.
If I float my battery today and I wake up the following morning to see 60% left,
charge it again and the battery get to absorption by 3am or refuse to float due to dull weather. I now use it again and wake up the following morning to see 60% left, what effect will this have to the life of the battery?

In this case, the flooded battery hasn't been fully charged for about two to three days but 50% DOD hasn't been exceeded.

uche393:
happy new year everyone, I'm about beginning my solar journey this year.
I bought the following
28ah lithium battery from ameh
2×150w panels
1 ceepro 12v 500w inverter

my issue now is charge controller, which amp will be good for a 28ah lithium battery is it 10a or 20a(pwm)?

uche393:
happy new year everyone, I'm about beginning my solar journey this year.
I bought the following
28ah lithium battery from ameh
2×150w panels
1 ceepro 12v 500w inverter

my issue now is charge controller, which amp will be good for a 28ah lithium battery is it 10a or 20a(pwm)?