My gear box had a crack at one of the bolt on top of the gear sump and we had to bring it down to patch d crack, gear was installed back refused selecting and speedometer not reading anymore

AmoloPatrick:
My gear box had a crack at one of the bolt on top of the gear sump and we had to bring it down to patch d crack, gear was installed back refused selecting and speedometer not reading anymore

Scan your car and share codes

What model of camry?

Rayd502:
What model of camry?

Toyota Camry 2003

AmoloPatrick:


Toyota Camry 2003

You are lucky your gear is cheap. 100k you are fine. The 2005-2006 big daddy's gear box is about 300k

Just scan the car and share codes so we take it up from there

big daddy start from 2002, hope you are aware of that?

Dozieson:


You are lucky your gear is cheap. 100k you are fine. The 2005-2006 big daddy's gear box is about 300k

Just scan the car and share codes so we take it up from there

AmoloPatrick:
My gear box had a crack at one of the bolt on top of the gear sump and we had to bring it down to patch d crack, gear was installed back refused selecting and speedometer not reading anymore

I think one of the gear connecting cable or plug is not properly connected..

Have your rewirer or yourself take a good closer look at all plugs/cable to the gear.

I had similar issues a year ago, took my Corolla to a mech for a gear oil seal fix.

We dropped the engine and gear, after fixing the seal, gear wouldn't shift and also, the rpm gauge was on 0. No reading at all .


I was mad scared bro, not until we removed the battery, removed the air fuel filter box and behold the gear sensor plug was not connected.


Pls inspect all plugs thoroughly.

slimmoney:
big daddy start from 2002, hope you are aware of that?

Yes I am very much aware. Big daddy of 2002-2004 uses 10pin. The price is 100k

alright bro, i just realized that, we learn everyday.

Dozieson:


Yes I am very much aware. Big daddy of 2002-2004 uses 10pin. The price is 100k

Scan the vehicle and it came out with the following error codes

1) P0717 input/ turbine speed censor A circuit no signal

2) P0032 H025 Bank 1 Sen 1 heater circuit high

AmoloPatrick:
Scan the vehicle and it came out with the following error codes

1) P0717 input/ turbine speed censor A circuit no signal

2) P0032 H025 Bank 1 Sen 1 heater circuit high

It is a minor issue. The speed censor is the culprit. Either it has shifted, or the wire connecting it was removed and not properly fixed or it is faulty. Your gear specialist/mechanic will need to remove the air filter box and check all connections property.

See below video on how to replace it


https://www.youtube.com/watch?v=lwCav2kEMcA

More videos


https://www.youtube.com/watch?v=cps5rvHoYwU

Dozieson:


It is a minor issue. The speed censor is the culprit. Either it has shifted, or the wire connecting it was removed and not properly fixed or it is faulty. Your gear specialist/mechanic will need to remove the air filter box and check all connections property.

See below video on how to replace it


https://www.youtube.com/watch?v=lwCav2kEMcA

I thought I did mention this above? .

I had similar experience with a Corolla, and alas it was just the plug that wasn't connected properly..

I mentioned above that he needs to physically inspect all connecting cable to the gear..

Your gear is good sir, just a missing connection.

samintegrity:


I thought I did mention this above? .

I had similar experience with a Corolla, and alas it was just the plug that wasn't connected properly..

I mentioned above that he needs to physically inspect all connecting cable to the gear..

Your gear is good sir, just a missing connection.

You were right. Scanning makes it easier to narrow down the issue

Dozieson:


You were right. Scanning makes it easier to narrow down the issue

It's all good bro...

Stay safe bro

Dozieson:


You were right. Scanning makes it easier to narrow down the issue

Please can scanning a car detect where gear oil is leaking from ?

FirstServices:


Please can scanning a car detect where gear oil is leaking from ?

No sir. Leaks are known through physical checks

Dozieson:


Yes I am very much aware. Big daddy of 2002-2004 uses 10pin. The price is 100k

What is the difference between the 10 and 13 pin?

Blankstare:


What is the difference between the 10 and 13 pin?

10 pin na problem..13pin na more problem

Blankstare:


What is the difference between the 10 and 13 pin?

10pin is a 4 speed gear
13pin is a 5 speed gear

13pin is more expensive. found in camry 2005-2009. However, 10pin is on camry 2002-2004. Other toyota cars also uses the 10 and 13pin gear