diordaves:


When it comes to quality borehole pumping machine, I will always go for and recommend a Sumo:

2,000w
2hp
Engine Speed: 2,800 rpm
Flow Rate: over 9000L/hr

If you can lay your hands on the original, you will be glad you did. It's pricey though. Well over 100k.

Thank you very much!!

Happy Valentine’s Day weekend, ladies and gentlemen! It’s still not too late to make it memorable.


I have another controversial, possibly unpopular opinion loading ……….

I’ll be back

folmus:


Thank you very much!!

My experience with submersible pumps, original Interdab1hp never disappoint in last 15 years when I brought the first one even since, is still the best in my experience with their output capacity. I bought couple of them for different locations since then. Either Russian or Italian made. The last one I brought pumped 10,000liters in less than 20 mins with over 95 meter depth of borehole, if it's not commercial borehole I don't think the guy needs to 2 hp, .75hp to 1hp is good enough to pump over 100 meters in my opinion

AVAILABLE FOR SALE

4BEDROOM FULLY DETACHED DUPLEX

LOCATION: LEKKI 2ND TOLL GATE

PRICE: 85M

FEATURES
-Gate house
-Car port
-Ample car park
- Security fence
- Secured Gated Estate
-Family lounge
- Fully Fitted Kitchen
- Chandeliers
- Beautiful Lightings
- Serene Neighborhood
-BQ
-cctv
-Inbuilt audio speakers
-Stamped concrete floor

Call Onome or chart her on WhatsApp: 08132160441

#impacthubproperties
#realestate
#realtors
#lekkiajahikoyi
#buynow
#realestateinvestment


Impact hub properties

kopell:
My experience with submersible pumps, original Interdab1hp never disappoint in last 15 years when I brought the first one even since, is still the best in my experience with their output capacity. I bought couple of them for different locations since then. Either Russian or Italian made. The last one I brought pumped 10,000liters in less than 20 mins with over 95 meter depth of borehole, if it's not commercial borehole I don't think the guy needs to 2 hp, .75hp to 1hp is good enough to pump over 100 meters in my opinion

Thanks!!

twinskenny:
price depend on the horse power.. got 1hp interdab for 85k

Thanks
Saved for reference purposes

kopell:
My experience with submersible pumps, original Interdab1hp never disappoint in last 15 years when I brought the first one even since, is still the best in my experience with their output capacity. I bought couple of them for different locations since then. Either Russian or Italian made. The last one I brought pumped 10,000liters in less than 20 mins with over 95 meter depth of borehole, if it's not commercial borehole I don't think the guy needs to 2 hp, .75hp to 1hp is good enough to pump over 100 meters in my opinion

Thanks.

Saved for the future

My research on paints indicates that Dulux, Caplux and Sandtex paints are made by the same company targeting different segments of the market/purchasing power.

uncleteeh:

That isn't far fetched sir, you people of old always appreciate olden days stuffs, ranging from building components to vehicles, to music, permit me to say LIFESTYLE in general.

I think you are right Sir. Thx.

Hajji M.

FEGEITOK:
My research on paints indicates that Dulux, Caplux and Sandtex paints are made by the same company targeting different segments of the market/purchasing power.

Dulux, caplux are same company (dulux is the trade type while caplux is Nigeria made lesser in quality to Dulux’

Sandtex is another company entirely

kopell:
My experience with submersible pumps, original Interdab1hp never disappoint in last 15 years when I brought the first one even since, is still the best in my experience with their output capacity. I bought couple of them for different locations since then. Either Russian or Italian made. The last one I brought pumped 10,000liters in less than 20 mins with over 95 meter depth of borehole, if it's not commercial borehole I don't think the guy needs to 2 hp, .75hp to 1hp is good enough to pump over 100 meters in my opinion

You are right sir
0.5-0.75hp is perfectly ok for 30-40metrs depth bore hole
While 1hp-1.5hp is ok for 100meters

mufutau55:


I think you are right Sir. Thx.

Hajji M.

You are welcome sir.

https://www.nairaland.com/6564561/pop-design-tv-wall-installation/59#110174132

Pop
Wall screeding
Tv wall
Pre cast paraphet


Call or what'app
07088534661

rotecch77:


You are right sir
0.5-0.75hp is perfectly ok for 30-40metrs depth bore hole
While 1hp-1.5hp is ok for 100meters

Mine is less than 40m they use 075

rotecch77:

Dulux, caplux are same company (dulux is the trade type while caplux is Nigeria made lesser in quality to Dulux’

Sandtex is another company entirely

Thanks for your comments.

Always felt that way until I reviewed this more closely today

EgunMogaji2:


I’m not an expert but theoretically concrete is supposed to get stronger with age as it cures.

I’ll have your onsite brikila test them.

If it were me I’ll probably get fresh blocks for the foundation part and use these for the partitions. Do pillars as a requirement regardless.

Good luck on your project.

PS: Plastering actually adds an impressive strong bond.

Thanks a lot for your response, Bless You.

seankim:

Attached is the ‘last seen’ of registerin the hypeman, Hslbroker2 and Mountmoriah.
Any correlation?
Hslbroker2, one thing I promise you is that you no go see semo chop on this thread.

I'm mountmoriah

Hslbroker is my twins brother, and there is no crime in this.

This is a note to this same accusations about a year ago and it was air cleared the poster above should try his best to correlate, hslbroker2 is my twins brother and not a fraudulent man or a fraudster.

I can't deny my twins brother because of some baseless accusations or because of a business that was wasn't successful because of health issues, and I know full payment was remittance and that case was settle even out of court.

Nobody will pray for that kind of unfortunate, and his doing well and fine now and I can testify to success and progress in services and quality services delivery.

This forumite should know it not a crime to be a twins born and to share the same surname.

This case should rest because reading all this accusations one by one, I see no where hslbroker was supporting any atrocities here against a fellow forumites.

kopell:
My experience with submersible pumps, original Interdab1hp never disappoint in last 15 years when I brought the first one even since, is still the best in my experience with their output capacity. I bought couple of them for different locations since then. Either Russian or Italian made. The last one I brought pumped 10,000liters in less than 20 mins with over 95 meter depth of borehole, if it's not commercial borehole I don't think the guy needs to 2 hp, .75hp to 1hp is good enough to pump over 100 meters in my opinion

Yea, pump capacity should be based on yield and not only depth of Borehole. We can use a 1.5-2hp pump on shallow depths of around 40m if the yield is excellent. And we can use 0.75-1hp on a hole of 90-100m if the yield is just fair. In whatever case, there should be a pump testing to determine the best capacity for the hole having in mind that any inbalance can lead to pump getting burnt.

In some cases, if the subsurface is not stable and good Casing is not used, you might end up having a collapse borehole as a result of vibrations from pump.

Who needs a land in ayobo, Ipaja?

https://www.nairaland.com/6917216/property-sale

twinskenny:


Mine is less than 40m they use 075

Yes good

FEGEITOK:


Thanks for your comments.

Always felt that way until I reviewed this more closely today

They just got the deal … I mean cap plc

I have a whatzap chart group with there rep

rotecch77:

They just got the deal … I mean cap plc

I have a whatzap chart group with there rep

Nice.

I narrowed down my paint choices to Dulux, Sandtex, Caplux and Berger.

That CAP PLC bought Sandtex validates my research. No wonder why the Sandtex website disappeared from the internet.

Thanks for your feedback

FEGEITOK:


Nice.

I narrowed down my paint choices to Dulux, Sandtex, Caplux and Berger.

That CAP PLC bought Sandtex validates my research. No wonder why the Sandtex website disappeared from the internet.

Thanks for your feedback

Yea that is the reason about their web

Here is the new price list from there head office at ikeja

rotecch77:


Yea that is the reason about their web

Here is the new price list from there head office at ikeja

Thanks again.

I feel Sandtex was the only serious competition but not as well funded as Caplux.

Hence this move.

twinskenny:
price depend on the horse power.. got 1hp interdab for 85k

This thing used to be 35k I think.

Buhari, well done o..

https://www.nairaland.com/6983767/3-storey-building-under-construction-collapses

Another one

twinskenny:
https://www.nairaland.com/6983767/3-storey-building-under-construction-collapses

Another one

Good evening sir, I'll like to speak with you if it's okay by you

BestRicePlug28:


Good evening sir, I'll like to speak with you if it's okay by you

sure..

twinskenny:
sure..

Please reply my email with your watsap line preferably.

twinskenny:
sure..

09022912366. My watsappline sir.

Still in stock Spanish products available here

rotecch77:

Dulux, caplux are same company (dulux is the trade type while caplux is Nigeria made lesser in quality to Dulux’

Sandtex is another company entirely

They purchased sandtex

Most of the recent shops being opened are branded Dulux and sandtex , the very first one like that in ibadan is on akala express