We are here to solve your plumbing issue

Water no get enemy ….fela ( the Abami Eda)

Hi anytime I pump water it would finish like 30 minutes after without even using the water personally please what may be the cause? I have checked for leakages on all pipes in the house yet I can't find nothing.

Sammyfabulous:
Hi anytime I pump water it would finish like 30 minutes after without even using the water personally please what may be the cause? I have checked for leakages on all pipes in the house yet I can't find nothing.

There is leakage somewhere
Check the distribution pipe from the over head tank area to each toilet portion

Good morning sir,
Which floor drain is very effective for odour prevention in the bathroom?

bobkezel:
Good morning sir,
Which floor drain is very effective for odour prevention in the bathroom?

Good morning chief
go for imported pvc drain ( the one with inner section)

rotecch77:

Good morning chief
go for imported pvc drain ( the one with inner section)

Thank you sir, pls can I see picture samples for guidance.

bobkezel:

Thank you sir, pls can I see picture samples for guidance.

Here is it, you can also get the pressing stainless type also, when you want to discharge waste water you will just press it.

rotecch77:


Here is it, you can also get the pressing stainless type also, when you want to discharge waste water you will just press it.

OK sir, thank you.

bobkezel:

OK sir, thank you.

You are welcome sir

$

Happy wkd to you all

Please my plumber used henco for hot water supply and pvc for cold water in the bathroom.
Can someone confirm if this is perfect
Plus what’s the advantage of water heater in the kitchen
Thanks for reply

Chammpagne:
Please my plumber used henco for hot water supply and pvc for cold water in the bathroom.
Can someone confirm if this is perfect
Plus what’s the advantage of water heater in the kitchen
Thanks for reply

Your plumber is very right with that setup ( but the pvc pipe should be good quality product)
Water heater in your kitchen depends on your choice

Plumbing..

Hello, pls I changed my pumping machine few days ago to interdab 0.5 hp as the old one became faulty.. since them I have been having issue with pumping water... if the water will pump today, the next day it won't pump. The plumber who fixed it for me has been here 5 different time, wen he touch the wires it will work perfectly but the next day it will stop working.... infact yesterdayhe came with an electrician to check the wires, the electrician reconnected everything and give assurance it will not stop working again. But it gave the same issue again today

This is pumping machine I bought just few days ago..

The plumber guy remove one pipe from the pipe that enter the borehole. I hope that is not the caused of this headache.

Lekan239:
Hello, pls I changed my pumping machine few days ago to interdab 0.5 hp as the old one became faulty.. since them I have been having issue with pumping water... if the water will pump today, the next day it won't pump. The plumber who fixed it for me has been here 5 different time, wen he touch the wires it will work perfectly but the next day it will stop working.... infact yesterdayhe came with an electrician to check the wires, the electrician reconnected everything and give assurance it will not stop working again. But it gave the same issue again today

This is pumping machine I bought just few days ago..

The plumber guy remove one pipe from the pipe that enter the borehole. I hope that is not the caused of this headache.

Here is the free solution for you.
The pump is a good one that is how it’s designed
It has what we called thermostats inside it which do regulate how the pump work ( it will work for some time and when it get hot it will trip-off this is to make the pump not to get burn easily and make it to last t long).
You can remove the thermostat BUT it means it will not get protection again ooo
But it will not stop- work. Stop . As before.
…

rotecch77:


Here is the free solution for you.
The pump is a good one that is how it’s designed
It has what we called thermostats inside it which do regulate how the pump work ( it will work for some time and when it get hot it will trip-off this is to make the pump not to get burn easily and make it to last t long).
You can remove the thermostat BUT it means it will not get protection again ooo
But it will not stop- work. Stop . As before.
…

Hello boss. The pump is not tripping of itself.. the problem it will work fine, then the next day it won't work atall again, if I call the plumber guy to come and check it that it's not working, the guy will just work on the wires and it will start working perfectly, then the next day, it won't stop again.. we have been on and off this now for 4 straight times..... my main guess is maybe there is some wrong connection the plumber guy did melting the wire inside. But the guys is just short of ideas or wat might be wrong

Lekan239:
Hello boss. The pump is not tripping of itself.. the problem it will work fine, then the next day it won't work atall again, if I call the plumber guy to come and check it that it's not working, the guy will just work on the wires and it will start working perfectly, then the next day, it won't stop again.. we have been on and off this now for 4 straight times..... my main guess is maybe there is some wrong connection the plumber guy did melting the wire inside. But the guys is just short of ideas or wat might be wrong

Oh ok, don’t let them damage the pump
Call a good electrician to check the wire that is where the problem is

rotecch77:

Oh ok, don’t let them damage the pump
Call a good electrician to check the wire that is where the problem is

OK. Thank you very much for your time

Lekan239:
OK. Thank you very much for your time

You are welcome

rotecch77:

You are welcome

Good morning,

I recently had my pump rewound, and I am now encountering an issue where the regular voltage supply that previously operated the pump is no longer sufficient. The pump only functions when using a generator. Could you please help identify the cause of this problem?

Thank you.

daddy001:
Good morning,

I recently had my pump rewound, and I am now encountering an issue where the regular voltage supply that previously operated the pump is no longer sufficient. The pump only functions when using a generator. Could you please help identify the cause of this problem?

Thank you.

Check the pump capacitor you can replace it with better one

Still available