tikristinimi21:


Can one use graffitex on a wall without plastering?
What is the output going to look like?
Is graftex water resistant, as in it does it permit growth of molds and algae?

somehow:



Thanks for the response.

olukaygold:

Yes sir...me and my clients na kobokobo house we dey build

rotecch77:
Update on another site, water tank stanchion is in progress, tiling , final lapse of pop work also in progress

Water tanks stand cost sum of 1.5m
Thanks to all our esteemed clients, advisers, well-wishers, and lastly to all NL members

gbadexy:

Graffitex is water resistant and doesn't allow growth but I don't know how it would look when applied on unplastered wall.

redgem:



Please check this out...what are your takes on it for external walls of a building? Do you produce this?
https://www.instagram.com/reel/CaoWtPrDFND/?igshid=MDJmNzVkMjY=

olukaygold:

I hope you know the meaning of 1:2:4??
If this is true, You're a Big Man Woman ooo

Slimszy:
Hi guys, I am currently facing an issue of water damp in my building. It's so frustrating.

I have broken the plaster about 2 feet above the ground in the interior, and it has risen to the upper part within 2 months, causing the screeded wall to peel off. I am completely tired of maintaining and maintaining a new house.

I need your advice please.

gbadexy:

Graffitex is water resistant and doesn't allow growth but I don't know how it would look when applied on unplastered wall.

oduncojamaica:


Oga mi, is it possible to use your Graffitex in the sitting room may be up to window level if we are having issues like water damp.

Slimszy:
Hi guys, I am currently facing an issue of water damp in my building. It's so frustrating.

I have broken the plaster about 2 feet above the ground in the interior, and it has risen to the upper part within 2 months, causing the screeded wall to peel off. I am completely tired of maintaining and maintaining a new house.

I need your advice please.

Slimszy:
Hi guys, I am currently facing an issue of water damp in my building. It's so frustrating.

I have broken the plaster about 2 feet above the ground in the interior, and it has risen to the upper part within 2 months, causing the screeded wall to peel off. I am completely tired of maintaining and maintaining a new house.

I need your advice please.

RockOfAgesAlumi:

Casement window with burglary and net..12mm rod
...Price for each window
[1]900 x 1400--53k
[2]1200 x 1200--53k
[3]1500 x 1200--63k
[4]700 x 700--32k
[5]700 x 1200--40k
[6]1000 x 700--40k
[7]750 x 1000--40k
Thanks

gbadexy:

This is graffitex and I produce it.

Olusojisorunmu:


1:4:6
Really!

redgem:


Are they good for exteriors? Do they form molds with time? Are they resistant to water? Do they peel and fall off?

abdulwastecx:


But 1:2:4 will not even give you the minimum required strength for most reinforced concrete applications.

If most reinforced concrete work. I use 1:2.5:3.5 which will give characteristics of concrete compressive strength of 25N/mm2 after 28days.

Also, the water-to-cement ratio is so important. W/C of 0.5 which will translate into 1 bucket for one bag mix should be the way to go.

For example, if Mr. A uses a mix of 1:1.5:3 with too much water, 1.5buckets, and Mr. B uses a mix of 1:2.5:3.5 mixed with 1 bucket, the strength achieved by Mr. B will be better than that of Mr. A with all things equal.

In summary, quality control is as important as the volume of cement used in concrete production. Also, I experiment with mixes and carry out tests from time to time.

Akerewe:


Good day engineer, pls if am not wrong ur 1:2:5:3:5 means, 1 bucket of water, 1bag of cement, 10 headpans of sharp sand, 6 headpans of soft sand, 10 headpans of Granite
Pls correct me if am wrong!
Also how many litres of water is ur 1 bucket equivalent?

olukaygold:

if you can afford 1:2:4 from foundation to Parapets;Good..but Before you can conclude on the type of Mixing ratio to follow,You need to firstly know the strength you wanted to achieve, different Mixing ratio with different strength for different Work.I manage materials depending on the type of Work and Project Im handling and I cut-short Materials where there're Options to and non of my clients ever complain there's a Wall crack or slight Pop crack in any of my Projects. This is my Ongoing kobokobo Project with less than 4m budget. it's a mini flat Bungalow that consists of 1sittinh room,1bedroom,1bathroom/Toilet,1kitchen,1 laundry room, front door and emergency/escaped door.
"LIKE PLATINUM BUT AFFORDABLE



#GoldenView

abdulwastecx:


But 1:2:4 will not even give you the minimum required strength for most reinforced concrete applications.

If most reinforced concrete work. I use 1:2.5:3.5 which will give characteristics of concrete compressive strength of 25N/mm2 after 28days.

Also, the water-to-cement ratio is so important. W/C of 0.5 which will translate into 1 bucket for one bag mix should be the way to go.

For example, if Mr. A uses a mix of 1:1.5:3 with too much water, 1.5buckets, and Mr. B uses a mix of 1:2.5:3.5 mixed with 1 bucket, the strength achieved by Mr. B will be better than that of Mr. A with all things equal.

In summary, quality control is as important as the volume of cement used in concrete production. Also, I experiment with mixes and carry out tests from time to time.

Aventures:
This really wows.me as well, what grade of concrete will this Give.

gbadexy:

They are ideal for external and are the most durable external paint.
It's resistant to water and growth. They easily last 20/25 years on the wall.

gordonbarrett:
How much for sliding window 1200 x 1200, with burglary and net?

abdulwastecx:


Dampness is a big problem with most Nigerian homes.

The primary case of dampness in buildings is capillary action. This is a phenomenon where water around the wall areas rises through the wall through this action.

The primary way to prevent this is to institute a dampness program during construction. If the site has a high water table, properly drain the foundation, use moisture barriers on all walls, and create a damp-proof membrane on the ground floor before the oversite concretes and provide a french drain to take accumulated rainwater from the building perimeters.

For this case, you will need to constantly remove water from the building perimeter using a french drain. Then peel the plastering up to around a meter high from the foot of the building, and replaster this portion of the building with a cement-riched plaster (1:4, one bag of cement with 6 parts plaster sand and 2 parts sand) also add a water sealant cement to the mix. If you can also paint the external wall with water sealant paint it will also help

KolaShangOne:


Oga Abdul, your 1,2.5,3.5 gives you M25 grade concrete.. That's 1 cement to 5 sand to 7 aggregates.. Do you use additives? Or could it be the 42.5R cement? Or the size of the aggregates?

I know it's 1.1.2. that's guaranteed to give M25..

I use 1,3,4.5 for my bungalows.. I get up to 18 -20N/mm² after 28days..

KolaShangOne:


Oga Abdul, your 1,2.5,3.5 gives you M25 grade concrete.. That's 1 cement to 5 sand to 7 aggregates.. Do you use additives? Or could it be the 42.5R cement? Or the size of the aggregates?

I know it's 1.1.2. that's guaranteed to give M25..

I use 1,3,4.5 for my bungalows.. I get up to 18 -20N/mm² after 28days..

abdulwastecx:


But 1:2:4 will not even give you the minimum required strength for most reinforced concrete applications.

If most reinforced concrete work. I use 1:2.5:3.5 which will give characteristics of concrete compressive strength of 25N/mm2 after 28days.

Also, the water-to-cement ratio is so important. W/C of 0.5 which will translate into 1 bucket for one bag mix should be the way to go.

For example, if Mr. A uses a mix of 1:1.5:3 with too much water, 1.5buckets, and Mr. B uses a mix of 1:2.5:3.5 mixed with 1 bucket, the strength achieved by Mr. B will be better than that of Mr. A with all things equal.

In summary, quality control is as important as the volume of cement used in concrete production. Also, I experiment with mixes and carry out tests from time to time.

Aventures:
This really wows.me as well, what grade of concrete will this Give.

Blessedsunny2:
please for my product, I want to buy
roofing sheet 177.85mts, cladding 43.52mts, flat sheet 60mts
The thickness is 0.45 long span aluminium.
Please call urgent......... I want to buy
My number 09077504287
My engineer number.akeem 07042584309