sethtsadopp:


??

michlins:
a combination of wrought and laser

frontview:


(D) Stainless Steel.

Olumighty123:


Wrought iron

FEGEITOK:


Does he have a tile cutter machine?

the motorized one not the manual one?

That is if you are a person that is fastidious.

redgem:


Thinking of this but don't it rust?

Hargbo:
Are you a Tiler

FEGEITOK:


No. But I have observed tilers using both.

Only the motorized one guarantees precision cuts and cuts that are all the same versus slight differences between pieces with the other one.

Some people don't care, there are others who get irritated by those slight differences.

Thomaths:
Please I need someone to help me with this, I got these quotes for the woodwork.
3x4 __ 35
2x6___ 22
2x4'___400
2×3____320
2×2___350

Now I was advised to buy 2X6 and cut into sizes rather than buying already cut wood. I was given this to buy in bulk and cut
2*6 = 560 = 756,000
3*4 = 35 = 47,250
courting 40,000

please would this bulk generate the quantity I was given above? what about the price? I was told they aare buying black Okilolo

redgem:


That would look good...got any samples?

Reeefe:


from ur calculations the 2x6 and 3x4 are same price. I don't think that is true in reality. and another thing to consider is the cost of splitting them to needed size or 2x2 , 2x3 and 2x4.

Reeefe:


from ur calculations the 2x6 and 3x4 are same price. I don't think that is true in reality. and another thing to consider is the cost of splitting them to needed size or 2x2 , 2x3 and 2x4.

GloriousGbola:


Most people care, but after a point you just throw your hands and give up.

dongc:


Any Bank that would callously release their customers information to a third-party should not be trusted ...Police first make a report!

Thomaths:
Thank you, he does quote the cost of cutting as 40k. I'm actually more concerned about whether the 560 pieces of 2X60 will yield these quantities: 3x4 __ 35, 2x6___ 22, 2x4___400, 2×3____320 & 2×2___350

Olumighty123:


It doesn't rust as much as I know

redgem:


This is nice... You are in Anambra right?

Thomaths:
Thank you, he does quote the cost of cutting as 40k. I'm actually more concerned about whether the 560 pieces of 2X60 will yield these quantities: 3x4 __ 35, 2x6___ 22, 2x4___400, 2×3____320 & 2×2___350

michlins:
yes ma'am. Nnewi Anambra State

redgem:


4hrs to Benin... It's my little kobo project, I don't know if it's okay doing rails and burglary all the way from Anambra

Reeefe:

yes it would give u all the 2x series but u have to buy the 3x4 separately

Thomaths:
Please I need someone to help me with this, I got these quotes for the woodwork.
3x4 __ 35
2x6___ 22
2x4'___400
2×3____320
2×2___350

Now I was advised to buy 2X6 and cut into sizes rather than buying already cut wood. I was given this to buy in bulk and cut
2*6 = 560 = 756,000
3*4 = 35 = 47,250
courting 40,000

please would this bulk generate the quantity I was given above? what about the price? I was told they aare buying black Okilolo

Successbay:
Yours is better sir..

I paid someone on this thread #820,000 to do a job based on previous work relationship and on trust...since August...

Till today he has not done 10% of the job, he is nowhere to be found and he keeps promising today, tomorrow etc.. Just cos I never knew his office..met him here on NL

You can try his number again to go check on him at the hospital if he picks..or try him with a different number..

All will be fine.

Rany4all:
No, it will not, kindly check again Sir. I believe you may have left out the 22pcs of 2x6 from your calculation.

coldcandy:


Don't try it. Roofing is not where to cut cost.
That 2x6 is not actually 2 inches x 6 inches. Try and measure the thicknesses yourself.

Gokoyer1401:
If you know the bank that you transfered the money to and his details, pls go to his/her nearest bank and complain about it asap. This is where BVN will do the work.

I have seen a case where they freezed a guy account for this. He had to agree on payment before the bank unfreeze his account.

Goodluck

gbadexy:

You may mention the person to save others from the same situation and force him to do the proper thing.

Canyona1:
why don't you mention the person, to save others that might want to give him job to do