.

AshipaEk0:
Please give me tips on wiring this AC/DC fan for AC use.

Its rather confusing and the 1 page manual it comes withis not helpful

the connection is divided into 3 section... (section 1 AC-in || section 2 power and control || section 3 DC-in)
it is quite easy but you need to be careful,
section 1> first wire named AC in (220-240v) connects to a power source, this power source is not like our regular connection (loop connection) for ceiling fan, the connection is just like plugging those wires to a socket for power ....

section 2 (middle) > red and black wire (serves as power output to fan) connects directly to the fan's coil red and black wire

> white and yellow wire (serves as control connection) this connects to fan's coil white and yellow wire

section 3 (last) > red and white wire named 12v-in connects to your 12v battery ,


please observe colour code for positive and negative connection
please run the wires one after the other to avoid confusion

contact a competent electrician if you can't wrap your head around my explanation

you can also shoot me a mail oloet@yahoo.com for further assistance

durodee:
I have been replying the mail request.s
Let's chat on 07zero-852-688four2

We will reach out Boss

kiekie1:
YULETIDE GREETINGS!!!

SMARTCELL DISTILLED WATER & ELECTROLYTES NOW IN STOCK!!

We are still committed to giving you the best quality of distilled water in the industry..

Join us in our price slash promo .. We look forward to working with you

Distilled water 25 Litres = N10,000 PER 25L GALLON (Selling with free 25L Gallon)(BUY 2 GALLONS & GET A 5L FREE)

Distilled water 5 Litres = N2,500 (Selling with free 5L gallon) (PROMO: BUY 12 units get 2 free)

Hydrometer = N5,000

Electrolyte 25 Litres = N15,000 (with free 25L Industrial Gallon) .. (BUY 2 GALLONS & GET 5L DISTILLED WATER FREE).

Electrolyte is mixture of sulfuric acid & distilled water having predefined specific gravity or concentration per mol. Smartcell electrolytes maintains 1.275 - 1.29 specific gravity range.

*Distilled H2O Analysis:
*TDS = 0 - 0007 ppm
*PH = 6.8 - 7.0

*APPLICATIONS:
Smartcell distilled water is free of toxins, microbes , pollutants and can be used for:

-Tubular battery periodic top up
- Skin care formulation
- Steam Iron
- Soap making
- Hand sanitizer production
- Cleaning services
- Laboratory
- Automotive radiator Cooling Systems
- Continuous positive airway pressure machines

We're open for dealership discussions. Feel free to reach us via contact details below

*Warehouse Location: Abule-egba , Lagos but can be dispatched to any state on buyers expense.

For further enquiry & purchase;
Contact,
Smartcell global services
CALL LINE: 081-350-31951
WHATSAPP::: http://.us/w/?c=a46ea5

Quality at it's peak ... Keep your orderd coming as usual

Season's greetings Sir's & Ma's

WE BUY DEAD/SCRAP BATTERIES!!!

We also buy off scrap/dead deep cycle batteries from any state to Lagos (Terms & Condition applies) .

12v 200a .... N23,000
12v 150a.....N17,000
12v 100a.......N11,000
2v 500a ......N6,000

Free pickup within some parts of Lagos mainland ! Shared cost logistics within Lagos Island environs . . If outside Lagos state , send the scrap batteries to your nearby Lagos park & get your payment alert immediately after confirmatory remarks from me with the transport company manager / secretary or driver (shared logistics cost depending on scrap battery quantity) .

Contact,
Smartcell global services
CALL:: 081-350-31951
WHATSAPP::: http://.us/w/?c=a46ea5

jonescosmos:
Good morning beautiful people.

Abeg who has this kind of Din Rail DC Energy Meter?

Wow, so a dc model of this device is now available?.
Up china!.

Did you finally get it?....how much
Seems pricey above .....50usd.
I like how it combines display wattmeter and dc amp fuse breaker function.

Valto:
chaii, after all the advice here, u still went ahead with this very wrong design. 6 tubular batteries on a 24v system. anyway the elders are coming to advise you.

it's the chaii for me.

AshipaEk0:
Please give me tips on wiring this AC/DC fan for AC use.

Its rather confusing and the 1 page manual it comes withis not helpful

I don't use the regulator with mine as it works with only the remote control, you just need to connect the ac input to an ac source, tape the DC input with an electrical tape to prevent a short then connect the wires labeled for the fan head to the motor. I believe you are good to go

Namzy:


We were able to run an 1.5 ton lg inverter ac, microwave, freezer and fridge totalling about 3000w simultaneously and inverter display was 92% load. At least its more than pf 0.8 for sure

Hmmmm.... I thought pf measurements has do with measuring actual watts drawn with a multimeter or wattmeter, then simultaneously measuring VA drawn with a multimeter.

olopan:
These are my personal thoughts

1. The quote has the barest minimum materials for the installation to work on paper

2. The prices quoted would get you average products, not that they are not good, just preference.

3. Ensure you know the exact warranty on each products .... Just to be save.

4. Lastly for your panels if you do 400W+ it will be helpful especially for your pump, as even 400W x 6 = around 1.5KWp under NoC.

Why? 400 and what was quoted was 1.8kw yours is 1.5kwp is there any difference

zeestone99:


Ask for the brands of materials

Thank you for your response.

I don't understand the bolded.

olopan:
These are my personal thoughts

1. The quote has the barest minimum materials for the installation to work on paper

2. The prices quoted would get you average products, not that they are not good, just preference.

3. Ensure you know the exact warranty on each products .... Just to be save.

4. Lastly for your panels if you do 400W+ it will be helpful especially for your pump, as even 400W x 6 = around 1.5KWp under NoC.

oloet:

the connection is divided into 3 section... (section 1 AC-in || section 2 power and control || section 3 DC-in)
it is quite easy but you need to be careful,
section 1> first wire named AC in (220-240v) connects to a power source, this power source is not like our regular connection (loop connection) for ceiling fan, the connection is just like plugging those wires to a socket for power ....

section 2 (middle) > red and black wire (serves as power output to fan) connects directly to the fan's coil red and black wire

> white and yellow wire (serves as control connection) this connects to fan's coil white and yellow wire

section 3 (last) > red and white wire named 12v-in connects to your 12v battery ,


please observe colour code for positive and negative connection
please run the wires one after the other to avoid confusion

contact a competent electrician if you can't wrap your head around my explanation

you can also shoot me a mail oloet@yahoo.com for further assistance

Thank you.

I figured it out after a while

Problem now is that 2 work.fine and the 3rd one it seems when I connect it to the positive AC power I get power in all the connection wires in the wall control.

If I apply a tester all the wires on the wall control light up

Is it that the wall control is bad?

I'm almost certain my AC wire connection is correct. Just positive and negative

Is it that the wall control is bad?

400W was suggested due to his pumping machine to at least get enough power from the sun to the pump directly when needed without taking from the battery.

And a 2400W would average 1500Wp +/- depending on the available irradiance of the sun.

Hope this helps?

IyaTola:
Why? 400 and what was quoted was 1.8kw yours is 1.5kwp is there any difference

.

ojeysky:
3 units of brand new ANT BMS 7s to 16s 300A available for sale @75k each

Still available for sale

NoC - means "Normal operating operating conditions"

This is what your solar panel would deliver in real life ... And so for your 1800Wp panels quoted, it will average 1KWp +/-

So if your pump is on, yojr battery js needed to support.

Pojomojo:
I don't understand the bolded.

Lastly for your panels if you do 400W+ it will be helpful especially for your pump, as even 400W x 6 = around 1.5KWp under NoC.

AshipaEk0:


Thank you.

I figured it out after a while

Problem now is that 2 work.fine and the 3rd one it seems when I connect it to the positive AC power I get power in all the connection wires in the wall control.

If I apply a tester all the wires on the wall control light up

Is it that the wall control is bad?

I'm almost certain my AC wire connection is correct. Just positive and negative

Is it that the wall control is bad?

After the connection did it work at all ?

Juror:

After the connection did it work at all ?

No it didn't.

That's what made me test the wires

AshipaEk0:


No it didn't.

That's what made me test the wires

Disconnect all connections on the control.

Connect only the AC wires, then read the DC voltage if there's any in the red and black that is supposed to go to the fan.

If anyone has used solar panels for sell please kindly quote me

Xmen149:
If anyone has used solar panels for sell please kindly quote me

4pcs of 180w panels, barely a month old.

chipsypop:

4pcs of 180w panels, barely a month old.

Price(if mono) or would you prefer talks off here

Xmen149:


Price(if mono) or would you prefer talks off here

Yea, mono. My WhatsApp number is on my profile.

Please can someone recommend a 2.5kva - 3.5kva 24v hybrid inverter with MPPT CC. It should have adjustable charging current & charging voltage settings that's compatible with LFP and has maximum power/idle consumption of <=20W and should be <=250k Max.

earthrealm:


Wow, so a dc model of this device is now available?.
Up china!.

Did you finally get it?....how much
Seems pricey above .....50usd.
I like how it combines display wattmeter and dc amp fuse breaker function.

Post link to the device.

Valto:
chaii, after all the advice here, u still went ahead with this very wrong design. 6 tubular batteries on a 24v system. anyway the elders are coming to advise you.

May be the installer/marketer convinced him that lithium is not good. I have heard such narratives from so many installers/marketers who are either not familiar with lithium or are out to sale their wares

TechGeek777:
Please can someone recommend a 2.5kva - 3.5kva 24v hybrid inverter with MPPT CC. It should have adjustable charging current & charging voltage settings that's compatible with LFP and has maximum power/idle consumption of <=20W and should be <=250k Max.

24V MUSTPOWER 3KVA hybrid inverter, 80A mppt adjustable charge settings pretty low idle consumption. sold around 220k to 230k

Inverter users in the house? Plz how long averagely should a 1.5kva inverter and 220ah battery power a 50w Lg tv, 5 led bulbs (50w altogether), 1 ceiling fan (100-120w) and a Bluetooth speaker (60w)? Please advise or how long does your inverter last with just one battery on the average?
I notice my battery indicator starts reading from 12.5 and immediately drops to 12.2 after full charge when napa light goes off. Please is this normal?
My battery is mpower 12v 220ah and 1.5kva Icell X2 series inverter.
Also, i have 4 150watts solar panels connected but once it's evening arnd past 3, the battery doesn't seem to charge by solar again.

.

AshipaEk0:
Please give me tips on wiring this AC/DC fan for AC use.

Its rather confusing and the 1 page manual it comes withis not helpful

Please, be very careful with this installation. One mistake and the fan won't work.

I got 2 units from a seller on Konga via offline sales. My installer made a silly mistake and the first one didn't work. We had to watch a video from YouTube (link below) together and we corrected the mistake in the second fan.

I had to reach out to the seller who then directed me to the distributor at alaba international who finally directed me to their service centre also.there in Alaba and it was repaired. It was not a palatable experience. I spent the whole day on that move.

https://youtu.be/uH7VgNyvo NI

NiyiOmoIyunade:
Quite a solid array of Victron things you have deployed here.

Do you indeed have up to 8kW of loads running off your 4 Pylontech bricks that made you need 10kVa worth of inverters?

If you ever revamp the system, there is scope to do away with external trunking and have a lot less visible cable clutter - since you used a baseboard, all the cabling can be hidden behind it.

Pylon degradation after 5 years - were you charging above 53v per MPP reco or max 52.4v per Victron reco?

If you let each battery run a full charge cycle standalone and then not discharge below 20%, you should be able to fix or arrest the decline.

Meanwhile I have 15 units of Pylon US2000 available for sale in case you or anyone has need - they are 3 years used and in excellent health.

Are these still available?