mattbass:
Please house can one explain the meaning of this signs on my dashboard. I'm new to car issues. Thanks.

samuelson06:


Why not try to scan the car and get the error codes? As an ordinary driver wey I be, I see your RPM going above 1k even as the car is idle and I think that's abnormal. I may be wrong though.

nymphomaniac:
Kingreign, gazzuzz, 9icetoo, grupo, nurey et al pls help.

My Camry 2003 V6 is having issues. It’s been misfiring for a while and the CEL blinks. I have scanned and the scan showed that I have a misfire in cylinders 1,3 and 5. All coils have been changed but the car isn’t idling and driving well. The rpm is erratic. It’s hard to start once the car is warm however it starts on first kick in the morning and when the car is cold. When I brake while in motion, the car jerks and driving hasn’t been pleasant at all. The fuel efficiency has understandably been very poor.

I’d appreciate your feedback as I have spent money on it. A mechanic said it’s the fuel pump. If truly it is, how much is an OEM love-vendor Cos I hear the Chinese pumps don’t last.

GAZZUZZ:


Replace this vvti solenoid on bank 1.

nymphomaniac:
Kingreign, gazzuzz, 9icetoo, grupo, nurey et al pls help.

My Camry 2002 1MZ V6 is having issues. It’s been misfiring for a while and the CEL blinks. I have scanned and the scan showed that I have a misfire in cylinders 1,3 and 5. All coils have been changed but the car isn’t idling and driving well. The rpm is erratic. It’s hard to start once the car is warm however it starts on first kick in the morning and when the car is cold. When I brake while in motion, the car jerks and driving hasn’t been pleasant at all. The fuel efficiency has understandably been very poor.

I’d appreciate your feedback as I have spent money on it. A mechanic said it’s the fuel pump. If truly it is, how much is an OEM pump Cos I hear the Chinese pumps don’t last.

nymphomaniac:
Gazzuzz it’s a 2002 1MZ. Any difference in your diagnosis?

Cc nurey, kingreign, grupo, 9icetoo et al

josephsm823:
Lexus RX 350 2011 jerks when I step on the throttle pedal. It only jerks while accelerating anytime I step on the throttle pedal.
No check engine light ON

What could be the issue?

please I need help OGA GAZZUZZ

nymphomaniac:
did you buy bad fuel? Scan car.

Trippledots:
Hi experts. Please does anyone have idea about Rav4 2004-05 for uber/bolt business? It's not goig to be on the road all day everyday. Just as a side hustle.

Thanks for your replies

Trippledots:
Hi experts. Please does anyone have idea about Rav4 2004-05 for uber/bolt business? It's not goig to be on the road all day everyday. Just as a side hustle.

Thanks for your replies

samuelson06:
My engine oil is leaking from the top engine cover.

I need someone staying in Lagos to help me buy a fitting oil seal rubber. If you can help, please, let me know. God bless you in advance.

Nafizzey:
8:28pm
Good evening house, I need advice, my tyre model is Austone Athena SP, produced in 18/19 i.e. meaning it was produced around May of 2019 making it 4 year old this year 2023

Now my question is should I change the tyre ASAP now or I can use still use it till end of the year..

Note the tyres are not really pressed just within the City driving to work and back. Thanks

I need advice GAZZUZZ and other Gurus

josephsm823:
Lexus RX 350 2011 jerks when I step on the throttle pedal. It only jerks while accelerating anytime I step on the throttle pedal.
No check engine light ON

What could be the issue?

please I need help OGA GAZZUZZ

CruzJoe:
pls experts, what's the cause of this in a tier?
what will the mechanic work on, to correct it from chopping another new tier when changed.

Note: the other side of the car tier is still very okey, no single chopping. Only this driver side is chopped.

Nafizzey:
8:28pm
Good evening house, I need advice, my tyre model is Austone Athena SP, produced in 18/19 i.e. meaning it was produced around May of 2019 making it 4 year old this year 2023

Now my question is should I change the tyre ASAP now or I can use still use it till end of the year..

Note the tyres are not really pressed just within the City driving to work and back. Thanks

I need advice GAZZUZZ and other Gurus

Nafizzey:
8:28pm
Good evening house, I need advice, my tyre model is Austone Athena SP, produced in 18/19 i.e. meaning it was produced around May of 2019 making it 4 year old this year 2023

Now my question is should I change the tyre ASAP now or I can use still use it till end of the year..

Note the tyres are not really pressed just within the City driving to work and back. Thanks

I need advice GAZZUZZ and other Gurus

GAZZUZZ:


Your tyre is made in china, quality standards very low. If you don't have any cracks you can continue using it

GAZZUZZ:


in 5 cases I saw, a rodent chewed on the wires . Remove the airfilter search the gearbox for the sensor, join the broken wire back, tape it up.

GAZZUZZ:


Your tyre is made in china, quality standards very low. If you don't have any cracks you can continue using it

Nafizzey:
thank you Sir, can I use it to travel long distance..?

PatriciaAdeyemi:
Pls @Gazzuzz and other experts. I need your assistance on P0793 code for camry 2012. I scanned the car as a result of poor fuel economy and erratic gear selection. Car jerks and shifts hard. Engine misfires with high rpm. Scan came out for P0031 O2 sensor which was easy to install but really having a difficult time locating the intermediate shaft speed sensor A for the code P0793.
Roadside mechanics can't find it on the geabox and the so called certified auto service centers here haven't been helpful. They are are insisting it is within the transmission or on the wheels which I know are the wheel speed sensors or ABS sensors.
Really tired as this issue started after one stupid transmission mechanic changed the ATF.
Kindly help.

tundebabzy:
Good morning.

Hyundai sonata 2011.

All four tires were bad so I decided to change them. I never noticed all the while that the front driver side tire was smaller than the remaining tires. After changing all the tires, the car bounces furiously at around 80km/h.

Does anyone know what fault the smaller tire was hiding? I've already done a not very cheap change of my shock absorbers.

GAZZUZZ:


Your tyre is made in china, quality standards very low. If you don't have any cracks you can continue using it

Nafizzey:
thank you, there's no cracks..

GAZZUZZ:


In the U660 it is embedded inside the transmission, but I would remove the transmission module and inspect the pins for corrosion