Vocals:


Not challenging your knowledge, but Abeokuta is sub divided into basement and sedimentary formations, so it was quite early for you conclude for Abeokuta generally.

Places like ; laderin, woke soyinka forest, oke mosan, lukosi, some selected areas of obada, etc. are not recommendable for air compressed rig drill. But it's possible to execute only that the it would be shallow; less than 60meters in most cases and its prone to collapsing of hole except you opt in for case down, which would still result in limited water supply quantity and quality (mud sediment are very likely to be seen time to time, and you would barely get clear water.(and you would expend more in terms of cost), and also the well & storage tanks would need frequent maintenance.

You are right. Each location in Abeokuta has to be addressed in a unique way.
Deep well would probably be the best option in ijeun Titun, which is near to laderin.
I was advised against drilling borehole in laderin. I went for deep well.
Obada alone has different terrain. I did deep well but failed. Had to do boreholes in two different locations.

Vocals:


Air compressed rig drilling is advised sir. You would get quality and quantity of desire water.

And I can handle that for you sir.

Your phone number isn't going through

oracle009:


Your phone number isn't going through

It's available on WhatsApp sir.
It comes on during working hours. I could call you if I have yours.

MrOkenwa:

You are right. Each location in Abeokuta has to be addressed in a unique way.
Deep well would probably be the best option in ijeun Titun, which is near to laderin.
I was advised against drilling borehole in laderin. I went for deep well.
Obada alone has different terrain. I did deep well but failed. Had to do boreholes in two different locations.

Sorry about your experiences, with right directives you would have cut a whole lot of cost.
I hope your wells are serving you?

saydfact:


the bolded - explain what you want exactly because estimating with 1m2 is difficult especially for tiles.

Thank you for your response.
The total square meter is 220sqm. All floor, no wall.
Aside tiles, what are the breakdown of other materials quantity?

hamtabfawaz:
Let's Transform your space.
Media Panel
Size : 8hx9
Price: ₦450K

Call or WhatsApp: 09122348437

I don't understand the size.

We are available for your project 100%

I've been meaning to write it here for a while, the opinion of myself and my screeders is that basecoat putty is better than cement screeding.
Often times, cement screeding tends to crack after some time, it needs to be primed with white emulsion paint to prevent excessive consumption of paint and give white background for a sharper final paint application.
Basecoat is white and doesn't need any extra priming.
Those we have handled application for can attest to these.

If no else will ask, I will ask biko.

What is happening to iron in this country. I can not understand it. Prices change on hourly basis. It doesn't stay up to a day again. Please what is going on

gbadexy:
I've been meaning to write it here for a while, the opinion of myself and my screeders is that basecoat putty is better than cement screeding.
Often times, cement screeding tends to crack after some time, it needs to be primed with white emulsion paint to prevent excessive consumption of paint and give white background for a sharper final paint application.
Basecoat is white and doesn't need any extra priming.
Those we have handled application for can attest to these.

I have known this for long, putty is the best

gbadexy:
I've been meaning to write it here for a while, the opinion of myself and my screeders is that basecoat putty is better than cement screeding.
Often times, cement screeding tends to crack after some time, it needs to be primed with white emulsion paint to prevent excessive consumption of paint and give white background for a sharper final paint application.
Basecoat is white and doesn't need any extra priming.
Those we have handled application for can attest to these.

I will never advise anyone to use cement or even pop for screeding. Basecoat is the best. After you did the screeding on mine and painted it, the end result was reflecting and as smooth as a mirror.

Thanks for sharing.

gbadexy:
I've been meaning to write it here for a while, the opinion of myself and my screeders is that basecoat putty is better than cement screeding.
Often times, cement screeding tends to crack after some time, it needs to be primed with white emulsion paint to prevent excessive consumption of paint and give white background for a sharper final paint application.
Basecoat is white and doesn't need any extra priming.
Those we have handled application for can attest to these.

gbadexy:
I've been meaning to write it here for a while, the opinion of myself and my screeders is that basecoat putty is better than cement screeding.
Often times, cement screeding tends to crack after some time, it needs to be primed with white emulsion paint to prevent excessive consumption of paint and give white background for a sharper final paint application.
Basecoat is white and doesn't need any extra priming.
Those we have handled application for can attest to these.

I agreed with you. Remember that my house that we used Cement Screeding few years ago. I will never use cement screed again.

Hajji M.

Make choice here from us and you will testify tomorrow

Good morning my good people of Nairaland

Osinachiadima global enterprise

Tiger Tmt naa baba

We are available for your project

gbadexy:
I've been meaning to write it here for a while, the opinion of myself and my screeders is that basecoat putty is better than cement screeding.
Often times, cement screeding tends to crack after some time, it needs to be primed with white emulsion paint to prevent excessive consumption of paint and give white background for a sharper final paint application.
Basecoat is white and doesn't need any extra priming.
Those we have handled application for can attest to these.

Noted with thanks. Just one question though...is this basecoat putty good for both internal and external walls, or just for internal walls only?

cjfbn:

I don't understand the size.

8ft in height by 9ft width

redgem:


Oh...thank you Sir...

You're welcome ma'am

Rany4all:
Noted with thanks. Just one question though...is this basecoat putty good for both internal and external walls, or just for internal walls only?

It can be used for both internal and external. It should dry relatively strong also without dusting, suggesting adequate binder and good bonding to the wall.

mufutau55:


I agreed with you. Remember that my house that we used Cement Screeding few years ago. I will never use cement screed again.

Hajji M.

Exactly sir.

Beframia:

Thanks for sharing.

You're welcome sir.

sonnie10:

I will never advise anyone to use cement or even pop for screeding. Basecoat is the best. After you did the screeding on mine and painted it, the end result was reflecting and as smooth as a mirror.

I'm also glad you used basecoat knowing you used the best possible matte type over it and knowing you would use something equally good for the internal.

gbadexy:

It can be used for both internal and external. It should dry relatively strong also without dusting, suggesting adequate binder and good bonding to the wall.

Do you offer screeding services?

ollykay619:

Do you offer screeding services?

Yes sir.

Good morning all, please how durable is polystyrene parapet? Also, do I need chain beam before it can be installed on a bungalow?

Vocals:


Not challenging your knowledge, but Abeokuta is sub divided into basement and sedimentary formations, so it was quite early for you conclude for Abeokuta generally.

Places like ; laderin, woke soyinka forest, oke mosan, lukosi, some selected areas of obada, etc. are not recommendable for air compressed rig drill. But it's possible to execute only that the it would be shallow; less than 60meters in most cases and its prone to collapsing of hole except you opt in for case down, which would still result in limited water supply quantity and quality (mud sediment are very likely to be seen time to time, and you would barely get clear water.(and you would expend more in terms of cost), and also the well & storage tanks would need frequent maintenance.

Thanks for the correction; well appreciated....
My comment might have been because of the areas i'm familiar with.

gbadexy:

It can be used for both internal and external. It should dry relatively strong also without dusting, suggesting adequate binder and good bonding to the wall.

Beautiful... appreciate your response.

Rany4all:
Noted with thanks. Just one question though...is this basecoat putty good for both internal and external walls, or just for internal walls only?

it has for external too

cash1115:
it has for external too

Thanks

rotecch77:
Tiger Tmt naa baba

Please what's the price of 12mm & 10mm per ton now? And do you know any reliable supplier?

Hi guys
I am a benefactor of nairaland information... Long story short, I presently embarking on a building project reason I decided to visit the properties thread.

Please I really don't know where to start from, in reading up info however I intend to start following up with discussions here notwithstanding, what would I learn/gain from the thread a newbie? I mean, j just started building a first house, the peg for foundation just started today.

Elders with expierence, please can u guys put me through perhaps guide me with the pro & con of building (first) new house.
I want to believe there are avoidable mistakes in order not to regret at completion.

I am also open for suppliers of materials (pocket friendly) as well professional advice/services... as much as I can get as long it would be helpful/vital in the ongoing project.

Thank you guys