Obnoxious2001:


Who said so?

The person wey wan sell me Solar panel

Used Schneider Conext Inverter/Charger SW4024 230V (4000W) available. What is your offer?

Drgreatone:
Desperately need a 2.5-3.5/24v and a 5-5.5kva48v hybrid inverter preferably household names. Market's bin crazy last 48hrs. Thanks

Trippledots:


Either na only me or me and somebody else tell am.

The two both.

Tbb 1.2kva 12v inverter for sale 150k

IllRatherNotSay:
Used Schneider Conext Inverter/Charger SW4024 230V (4000W) available. What is your offer?

You want to send me back to the village abi...

Efficiently? Yes but it will charge nonetheless
I may agree with the person cause
1. Ure on a 12v system n ur panel working voltage will likely b below d required voltage that's needed for ur mppt to work(thats if ur CC is mppt), so ur mppt will function like pwm
Are u using a lead acid battery? If yes, ur battery won't get to float with just 1 300w n u will soon start noticing capacity drop

Gshems:
Please people, I have a 1000 watt sachets inverter and 100ah battery. I want to get Solar panel for this system but I am being told a 300watt panel can’t charge the battery efficiently. How true is this?

Panels
Inverter (standalone)
Charge controller (I'm not a fan hybrid system)
AC n DC cables
Earth rod
MCB SPD n DB
Panel rack

guente02:
Hey Guys

I'm planning to set up a solar power system to charge two 24V, 150Ah batteries during 8 hours of sunshine.
I intend to use a 24V hybrid inverter. I tried SMK but it packed up in months.
Can you suggest the specific components I'll need to buy, along with their ratings, to achieve this?

BlueStripper:
Good Morning Everyone,

My apologies for the confusion. I was so angry yesterday.

I have an independent lithium setup that's different from the lead acid setup. Each setup has its specific load assigned to it.

Like I said, I decommissioned the Fullriver batteries because they have served me for many years. I wanted a longer runtime so I switched to Tall Tubular Batteries.

My panels are 1pcs of 560 watts generic solar panel and 2 Pcs of 180 watts Africell solar panels connected in 2S1P array configuration.

For charging, sometimes I get over 900 watts of energy from the panel at full sunlight. And over 60amps from the CC to these batteries.

I believe I have answered all the questions asked.

Thank you so much

Take your tubular batteries for electrolyte density test first

I no know book, but why can't 1 300w solar panel can't charge a 100A battery??

Na work I learn I no go school explain give me abeg let me understand

Jefferyzz:
Efficiently? Yes but it will charge nonetheless
I may agree with the person cause
1. Ure on a 12v system n ur panel working voltage will likely b below d required voltage that's needed for ur mppt to work(thats if ur CC is mppt), so ur mppt will function like pwm
Are u using a lead acid battery? If yes, ur battery won't get to float with just 1 300w n u will soon start noticing capacity drop

actually I plan to use a 30a pwm charge controller. I don’t use it for heavy load. Just a fan and charging my laptop when it is low. Please, with my current system. How do you advise me to proceed? Tho, I won’t be using the system for long cos I plan to change my inverter and increase my battery as money Dey show. But right now I need Solar to charge my system so I won’t on gen to always charge

isangjohnson:
Tbb 1.2kva 12v inverter for sale 150k

Does it have lithium charging profile?

Thanks for your response. I really appreciate. The owner ended up connecting only 2 of the new panels in series with the previously installed 7 panels so as not to exceed the inverter max Voc of 500VDC And it worked fine.

Dam5reey:


You can combine them all in series but note that there will be about 10% loss.
with about 5KW PV, it doesn't matter.. losses cannot be avoided when batteries are full and nowhere for power to go.
If cost is not an issue, proceed to get Separate controller for the new panels.

Good day to you all,
Please between growatt inverter and gennex which one is the best?

Nawa o. 550w Jinko that I bought from Foauni last week for 150K has now turned to 184K. Now now now. I bought one, I said I will come back next week to pick one more. In one week, the thing has jumped up with 34K.

same thing i experienced, i saw 435 @ 117k on monday by wed it has become 136,600k over 100k diff for 6 pcs
, i quickly paid for it now i have to

easyyoke:
Nawa o. 550w Jinko that I bought from Foauni last week for 150K has now turned to 184K. Now now now. I bought one, I said I will come back next week to pick one more. In one week, the thing at jump up with 34K.

abbeymighty:
same thing i experienced, i saw 435 @ 117k on monday by wed it has become 136,600k over 100k diff for 6 pcs
, i quickly paid for it now i have to

I am really shocked bro. I wanted to buy 3pcs 550W more. But with the current price hike, I just discovered buying 4pcs of 435w is more cost effective now and will give me more power. I no dey buy 550w again

Buy 2 180/190 watt panel with 10a isc n put them in parallel den connect that to ur pwm

Gshems:
actually I plan to use a 30a pwm charge controller. I don’t use it for heavy load. Just a fan and charging my laptop when it is low. Please, with my current system. How do you advise me to proceed? Tho, I won’t be using the system for long cos I plan to change my inverter and increase my battery as money Dey show. But right now I need Solar to charge my system so I won’t on gen to always charge

IllRatherNotSay:
Used Schneider Conext Inverter/Charger SW4024 230V (4000W) available. What is your offer?

Price pls

Jefferyzz:
Buy 2 180/190 watt panel with 10a isc n put them in parallel den connect that to ur pwm

Thanks for the reply

It will charge it but it's won't b optimal. He won't get anything close to 300w going into d battery. Max e'll get is 145w.
Mppt is a DC to DC converter. ie converts volts to amps but ur panel must b at certain voltage b4 this is done. My CC mppt working voltage is 35v. Some 300w panel underload will give like 31v 9a, for a 12v system that 31v will b cut off to 14.5(bulk voltage) n 9a which is like 130w, same thing goes if he's using pwm. But if 2 is in series, mppt kicks in n convert d excess volts. So u'll av close to ur panel capacity.
Imagine 9a going into d battery at the same time supply small load on d inverter.
If d CC is pwm n it's 12v system best is those 180/190w panel with 9a or 10a isc in parallel.

Obnoxious2001:
I no know book, but why can't 1 300w solar panel can't charge a 100A battery??

Na work I learn I no go school explain give me abeg let me understand

Or if d money dey buy mppt with 2 300w cause of future upgrade

Gshems:
Thanks for the reply

Jefferyzz:
Or if d money dey buy mppt with 2 300w cause of future upgrade

The money no Dey o. This one sef Na to just free from nepa wahala. Basic usage to charge and on fan and light for night

whatsapp me 08020574628 or telegram@vvalto

abbeymighty:
Good day to you all,
Please between growatt inverter and gennex which one is the best?

Gennex branded Inverters are Axpert inverters made by Voltronic power dem jst repaint the cover to their brand, google Voltronic and compare with Growatt.

I hve 1 Axpert av been using for a whille nw no issues at all its a 4kva 48v system with inbuilt mppt CC.

Let others contribute too

OZORO POWER PRODUCTS NOW AVAILABLE!!!


PRICES CAN CHANGE DUE TO FOREX RATE

• 220AH Tubular Battery: N310,000
• ⁠1.1Kva/12V SW Inverter: N150,000
• ⁠1.4Kva/12V SW Inverter: N175,000
• ⁠2.5Kva/24V SW Inverter: N270,000
• ⁠4.0Kva/48V SW Inverter: N450,000
• ⁠5.5Kva/48V SW Inverter: N850,000


MADE IN INDIA .. 2 Years standard warranty on tubular batteries


For further enquiry & purchase;
Contact,
Smartcell global services
CALL LINE::::: 081-350-31951
WHATSAPP::: 081-703-85620

Please guys I need a PsW sachet inverter 3000w 12v

Abeg Veterans abi experts in the house. If you are carrying 80amps from your charge controller output to your battery. What size of wire do you use. You guys with 80A, 120A controller for a 12v system. My controller and battery are quite close to each other. This my online calculator is telling me 26mm. How will 26mm wire enter this tiny hole in this charge controllers. Not sure I am doing my calculation right

Where can I buy 50a 4s smart bms?

I'll like that, how much does it cost?

Will the one in the picture work?

Trippledots:


There is a guy that sells lithium battery bank with DC adaptors for laptops and rechargeable fans. I think you are a better off with that solution than a full inverter installation at the budget.

DC to DC is very very efficient.

It also comes with small DC bulbs on request that won't drain your battery so fast.

I just installed 2*475w jinko panels and powmr 60a cc.

My tubular batteries are very low as they're showing 20v on the cc,but the issue I have now is I'm seeing the charging voltage from the cc,but not the wattage,I don't know if that makes any sense.

The inverter also isn't on atm because I intend to charge to 27v atleast before powering it on.

Could the inverter not being on be the reason why I can't see the wattage from the panels?

ti4c:
I'll like that, how much does it cost?

Will the one in the picture work?

Cooldipo

ti4c:
I'll like that, how much does it cost?

Will the one in the picture work?

No, it won't. Try reach out to @cooldipoMPS like @Trippledots recommended. What he sells will work perfectly for you within your budget. His contact. 0 806 531 6307