Hello guys,

Please can anyone give me Idea of prices for the following materials in mowe axis

9" Blocks
6" Blocks
Sharp Sand 10 tonnes (1 Load)
1 bag of Cement

Thank you

Please what is today's price of:

1. Dangote cement
2. Pop cement
3. 10tons plaster sand

It depends on location sir, if in Lagos:
Plaster Of Paris (POP) ranges from 9k to 10k
Fillas 4k to 4.5k
Dangote cement from 7.5k to 8k sir

Billions123:
Please what is today's price of:

1. Dangote cement
2. Pop cement
3. 10tons plaster sand

Aduragbemi45:
It depends on location sir, if in Lagos:
Plaster Of Paris (POP) ranges from 9k to 10k
Fillas 4k to 4.5k
Dangote cement from 7.5k to 8k sir

Thanks boss

rmx:


Meant plaster board , the one that comes in 1.2 x 3m , thought they could be used interchangeably

Meanwhile same screeding treatment is given to both the cement board and plaster boards in all my projects, since all walls are screeded anyway before painting . Attached is another pix from a project last year .you can see the cement board was screeded , added another use I put cement boards to

Good morning RmX, can you help with contact of the person that did your exterior cement board design please. Am thinking of doing similar design in my project

Combined footing column base

Pop ceiling loading

I have two questions concerning my 3 bedroom bungalow house project

1. It's at the roofing stage, the size is 52ft by 20ft plus the verandah( verandah is not having shoot out) pls how much will the roofing cost. Pls note: I won't be using fancy and expensive roofing sheet just the normal type and very low roofing angle

2. Is ring soak-away pit advisable? I don't want to construct the convectional soak-away pit

Done & delivered

Electrical piping, wiring & fittings of this 32 units apartment in lekki.

08035153923
08051355133

Hi house, please is there anyone in Ibadan who can get this stone installed or supplied for me? Thanks

saydfact:


Hi.
First I read a comment where sm1 said you shd break... DON'T.

2, the shape of the soak-away don't matter, so don't worry about the bent (converging) side, what you shd be worried about is the cracks and possible leakage.

Solution.

Continue to sink the septic tank until you get to the FINAL POSITION.

Then, see the existing 4 walls of the Septic tank and your EXTERNAL FORMWORK.

Proceed to create internal formwork 150mm thick minimum ALSO reinforced with 12mm rods @ same spacing you used before.

Lastly, cast the new concrete wall and enjoy.

You'll have a wall of about 350mm thick and a slightly smaller internal dimension but no worries....

Keep. Me. Updated. If. You. Need. Further. Help.

Thank you so much for your non-judgmental advice.

PrimeQuay:


Can you share a cost estimate as of today per sqm for POP Plaster boards and cement boards?

Thanks

won’t be able to do the actual calculations , can however connect you to the installer and where I purchase materials , between them they can give you an accurate estimate . You can also get at jibowu if at lagos

A board of 12mm plaster board 1.2x3 m should be around 15/16 k , 10mm cement board 1.2 x 2.4 m is around 18/19k , then you have accessories and labour

Rawgold300:


Good morning RmX, can you help with contact of the person that did your exterior cement board design please. Am thinking of doing similar design in my project

I Don copyright that design , you must pay me

Nah my signature be that now

Good Morning Everyone, don't be a victim!

lga23:
Hi house, please is there anyone in Ibadan who can get this stone installed or supplied for me? Thanks

Cc bolu1986

lga23:
Hi house, please is there anyone in Ibadan who can get this stone installed or supplied for me? Thanks

Let’s talk sir

07088534661
WhatsApp only

rmx:


I Don copyright that design , you must pay me

Nah my signature be that now

😂 fair enough, am not doing the exact same design … I will discuss other designs with the person if given the number..

Lemme show you some of the designs I saw on YouTube

rmx:


won’t be able to do the actual calculations , can however connect you to the installer and where I purchase materials , between them they can give you an accurate estimate . You can also get at jibowu if at lagos

A board of 12mm plaster board 1.2x3 m should be around 15/16 k , 10mm cement board 1.2 x 2.4 m is around 18/19k , then you have accessories and labour

You can contact me for installation and estimate sir..

08107300212 WhatsApp only

08084563296 call/WhatsApp

Thank you.

good morning guys. What do you think about LVP floor plank? has anyone used it? compared to normal tiles, which is better and cheaper? I am considering using it everywhere in my house. If you have any plug kindly share with me also if you have any information, kindly share it

Rawgold300:


😂 fair enough, am not doing the exact same design … I will discuss other designs with the person if given the number..

Lemme show you some of the designs I saw on YouTube

Just joking . Akeem 0806 553 2512 for external you can use 6 or 8 mm cement board . Will be cheaper

Another work in progress

ajabani4allah:
I have two questions concerning my 3 bedroom bungalow house project

1. It's at the roofing stage, the size is 52ft by 20ft plus the verandah( verandah is not having shoot out) pls how much will the roofing cost. Pls note: I won't be using fancy and expensive roofing sheet just the normal type and very low roofing angle

2. Is ring soak-away pit advisable? I don't want to construct the convectional soak-away pit

Please WhatsApp 08032339807

Chat me now 08099212590 im in ibadan i can get it done for .

lga23:
Hi house, please is there anyone in Ibadan who can get this stone installed or supplied for me? Thanks

lga23:
Hi house, please is there anyone in Ibadan who can get this stone installed or supplied for me? Thanks

Is you like this marble Paladiana, I can direct you to the person that did mine

rmx:


Just joking . Akeem 0806 553 2512 for external you can use 6 or 8 mm cement board . Will be cheaper

Another work in progress

Thanks a lot will get in touch.

For Anambra location, pls I need quote for the following..


I WANT FRAMELESS WINDOW GREY WITH GREY REFLECTIVE GLASS 5MM AND STAINLESS PROTECTOR 32MM AND M/NET.

(1) 950 X 1900 .... 2 WINDOWS

2) 1200 X 1400... 2 WINDOWS

3) 700 X 1900.... 11 WINDOWS

4) 600 X 1900... 19 WINDOWS

5) STAIR CASE 600 X 3600... 2 WINDOWS

6) VISITOR TOILET WINDOWS
900 X 900... 1 WINDOW

7) 600 X 900... 5 WINDOWS

600 X 700... 2 WINDOWS


Levave whatsapp number and I'll get in touch thanks

Juxtix88:
For Anambra location, pls I need quote for the following..


I WANT FRAMELESS WINDOW GREY WITH GREY REFLECTIVE GLASS 5MM AND STAINLESS PROTECTOR 32MM AND M/NET.

(1) 950 X 1900 .... 2 WINDOWS

2) 1200 X 1400... 2 WINDOWS

3) 700 X 1900.... 11 WINDOWS

4) 600 X 1900... 19 WINDOWS

5) STAIR CASE 600 X 3600... 2 WINDOWS

6) VISITOR TOILET WINDOWS
900 X 900... 1 WINDOW

7) 600 X 900... 5 WINDOWS

600 X 700... 2 WINDOWS


Levave whatsapp number and I'll get in touch thanks

Good morning sir
FRAMELESS WINDOW GREY REFLECTIVE GLASS 5MM AND STAINLESS PROTECTOR 32MM AND NET.
•PRICE FOR EACH WINDOW •
[1]900 X 1900---160k
[2]1200 X 1400--150k
[3]700 X 1900---133k
[4]600 X 1900---125k
[5]600 X 3600---270k
[6]900 X 900---85k
[7]600 X 900---60k
[8]600 X 700---50k
WhatsApp Numbers 08069609983
•We work nationwide•
Thanks

Juxtix88:
For Anambra location, pls I need quote for the following..


I WANT FRAMELESS WINDOW GREY WITH GREY REFLECTIVE GLASS 5MM AND STAINLESS PROTECTOR 32MM AND M/NET.

(1) 950 X 1900 .... 2 WINDOWS

2) 1200 X 1400... 2 WINDOWS

3) 700 X 1900.... 11 WINDOWS

4) 600 X 1900... 19 WINDOWS

5) STAIR CASE 600 X 3600... 2 WINDOWS

6) VISITOR TOILET WINDOWS
900 X 900... 1 WINDOW

7) 600 X 900... 5 WINDOWS

600 X 700... 2 WINDOWS


Levave whatsapp number and I'll get in touch thanks

Pls contact me for black cement windowhood pillars and white ceiling pop

08084563296

Lasercut sliding gate ready for delivery.

We are available for you job

Contact us for your Architectural Designs & Construction Services

my people I am looking for solution for a window that is high up a void where it is not reachable.
does anybody know of anyone in Nigeria that can do a window that is automated or electrically controlled so no need for ladder whenever you need to open the window for ventilation? or another mechanical system that enables you open it from the ground