easyyoke:
Make una please help me answer🙏 🙏🙏

Trippledots:


Same here. But na for bungalow height, and my balcony directly overlooks them, so Dem de there like rock.

microgiant:


How can people help you with answer?

I am not vast in RE but it is better you give all information, to help those who are willing to answer your questions.

You ask a vague question and expected people to crack their brain and solve your problem.

There is no Inverter known as all in one, what brand of inverter are you using?

EduTechTainMent:


Nice one. Mind sharing the brand and price you got it?

KINGKONG:


120A CC bought and installed.... Awaiting tomorrow sunlight to see it's performance

Thanks for your recommendation and advice

swagifted:
this is the only CNG i know oo 😂

Trippledots:


Baba, those cracked panels still de blast ba? 😊

Dam5reey1:
Anyways, we successfully converted 2, units of 24V 280AH into 48V 280AH, single Unit, using the available resources..

14.4kw + 6kva..

Dam5reey1:
Anyways, we successfully converted 2, units of 24V 280AH into 48V 280AH, single Unit, using the available resources..

14.4kw + 6kva..

KINGKONG:


The inverter system is handling load like machine ☺️☺️

As the sun dey fire dey go, Na so the equipment dey jam am dey go

Thanks for recommendation and advise here

Inverter: Tusker 12V 1.5KVa transformer based
CC: 120A Charge controller from Felicity
Battery: 12V GSR Tall tubular battery (To be upgraded soon)
Panels: 580W X 3 from Jinko

Equipment used but not at the same time

Industrial Weaving machine using Servo-motor X 1
Industrial Sewing machine using Servo-motor X 1
Industrial Buttonhole machine X 1
Industrial Button Tacking machine X 1
Ceiling fan X 5 (Short blade)

compunigeria:


Please wont they work when connected in series to get the 48v?

If yes, what are the disadvantages of doing that compared to the above?

KINGKONG:


The inverter system is handling load like machine ☺️☺️

As the sun dey fire dey go, Na so the equipment dey jam am dey go

Thanks for recommendation and advise here

Inverter: Tusker 12V 1.5KVa transformer based
CC: 120A Charge controller from Felicity
Battery: 12V GSR Tall tubular battery (To be upgraded soon)
Panels: 580W X 3 from Jinko

Equipment used but not at the same time

Industrial Weaving machine using Servo-motor X 1
Industrial Sewing machine using Servo-motor X 1
Industrial Buttonhole machine X 1
Industrial Button Tacking machine X 1
Ceiling fan X 5 (Short blade)

Dam5reey1:


The BMS that came with it does not support series connection.
They may be voltage drift on the long run, also the plan was to get a 6KVA inverter to power the required load.

bassdow:
Don't get you

Drgreatone:

Waut u mean u just put the panel on the roof without anything to hold it down? What type of roofing and is it slopy?

osayuwamwen:
Pls can i use 2 pair of 12v 100ah with 4kva inverter to power 1.5hpower submersible pump?

bleexInc:
Hello House,

Which battery is best to use with luminous Eco volt Neo 1500va 24V inverter. Considering that Amaron quanta battery got damaged in less than a year.
Thank you

mctfopt:



1.5HP submersible consumes about 1700 watts. 2 nos of 12v 100ah is about 2400wh (I'm assuming the batteries are lithium batteries). The run hours will be less than 1 hour 30 minutes. You are also draining it at a high C-rate of 75A (I'm assuming the 4kva is a 24v inverter) which is almost 1C.


Unless you do this during heavy sunshine (I'm assuming you have like 3000w of solar panels) this will continuously strain your battery.

Also I'm assuming the battery is wired with appropriately sized cables and have fuses and breakers of right capacity.

My recommendation: consider getting a standalone solar panels + DC/AC pump to replace the current AC submersible pump, or upgrading the system to 48v and get a 48v lithium battery (from 7.5kwh upwards) to run this pump or finally to use NEPA/Gen to pump water.

HeavenlyBang:


Remind me how 1.5 HP is 1700w again?

HeavenlyBang:


Remind me how 1.5 HP is 1700w again?

Trippledots:


Any roof installation higher than ground floor building, please use standard rack or at at the least, a binding wire.

TechGeek777:


Real power draw is different from spec sheet based on many factors (length of pump to where pipes start from, wire Guage and wrong labeling of actual pump capacity).

What most buy as 1.5hp is mostly 2hp pump.

Ordinary this supposed to be 1.5kw, but above factors could make it consume upto 2.3kw in real usage compared to the typical 1.1kw you would seen boldly written on the body of the pump.

mctfopt:


This is real life measurement. I'm not using paper specs. My 1.5HP Sumo draws 7.3A @ 230V

Gshems:
Please who sells dc breakers and spd here

osayuwamwen:
Pls i need help my inverter has refused to power on each time I switch it on the back light on the display on but nothing is displaying on the screen, it happens like this b4 but it later come on but this time it has gone blank