tafrica:

Pls, are ur d**v channles showing?

Yes Sir, they are showing. I am on CCCAM account

tafrica:


Thanks,
Engnr installed it bt I hv nt been able to reach him.
I use qsat11 nd I used to watch all mytv nd joytv fta channels b4 I did factory reset. I need their satellite settings; like lnb freq, transponder, position etc cuz I only watch d*** channels which aren't even showing presently.
Ur help is appreciated, thanks.

you seem to be newbie in satellite installation right, firstly snap ur 2 dish pic we will start from there

hugman:

you seem to be newbie in satellite installation right, firstly snap ur 2 dish pic we will start from there

Lool, actually I'm naïve in installation. I hv jst not been able to get back all those mytv nd joytv fta channels. I hv scanned virtually all the satellites on the decoder but I only get d**v channels each time I scan any of the sat, including nilesat nd hotbird satellites; these satellites (nilesat, hotbird etc) normally used to bring different fta channels after each scan.

Sir from pic you can only get the channels you are receiving now with the dish from the left while the dish on the right is for church channels
For you to get both at the same time first trace the cable wire from the dish to the diseqc and tell me which diseqc number each one enter

I jst bought a new Q-sat Q23G decoder n I'v bin tryin 2 activate it but it kips dispayin "can not connect server, please try later". Pls, any tips on hw 2 go about it or is it a general problem?

kenn411:
I jst bought a new Q-sat Q23G decoder n I'v bin tryin 2 activate it but it kips dispayin "can not connect server, please try later". Pls, any tips on hw 2 go about it or is it a general problem?

Bro, Qsat server is down @ the moment for the past 3days and you will not be able to activate your decoder. Contact your reseller to alert you once QSAT is back online, so that you can try to activate it again, then will it work

ayoqueen:
Bro, Qsat server is down @ the moment for the past 3days and you will not be able to activate your decoder. Contact your reseller to alert you once QSAT is back online, so that you can try to activate it again, then will it work

Queen will come up soon work to restore it is ongoing. Patience.

guass:

Queen will come up soon work to restore it is ongoing. Patience.

when will it come up?

Qsat avatarcam servers work is almost done in all server while few servers are on queue to be completed in a short time

Tnx Guyz, mine iz wrkin now!

Hi,
I need help. My Qsat 13G shows load when i plug it, after about 5 seconds, it displays the QSAT 13G home page (i mean the green QSat screen), then waits for about 3 seconds before restarting again...It keeps doing this no matter how long i leave it on and i am frustrated since yesterday when it started. I need help please.

adeola9:
Hi,
I need help. My Qsat 13G shows load when i plug it, after about 5 seconds, it displays the QSAT 13G home page (i mean the green QSat screen), then waits for about 3 seconds before restarting again...It keeps doing this no matter how long i leave it on and i am frustrated since yesterday when it started. I need help please.

Read page 1 answer to ur problem is there

adeola9:
Hi,
I need help. My Qsat 13G shows load when i plug it, after about 5 seconds, it displays the QSAT 13G home page (i mean the green QSat screen), then waits for about 3 seconds before restarting again...It keeps doing this no matter how long i leave it on and i am frustrated since yesterday when it started. I need help please.

Read page 1 answer to ur problem is there(more light on why qsat reboot itself)

Plsease am using qsat 13g since a week now it does not connect to de server. Plsease what is de problem?

REASONS WHY 99% OF QSAT SERVERS STILL DOWN WHILE 1% IS ACTIVE

99% of qsat servers remain dead over a week ago while 1% of the server has been revive
The qsat main server is active that while the rebooting of qsat receiver has stop .
qsat users should be patient because everything will return to normall in a short time and the main reason that is delaying qsat team to restore all servers is because maintaining a iks servers company is so expensive high cost involve
user should be patience work is still ongoing at this moment of writing

Tnx bro

-

Please how can one locate his Qsat code in his Qsat decoder?

My qsat problm, is dat it doesnt wrk well again. Nrmally wen i on it. It wil wryt netwrk con success nd expire in 327 days.. Naw it doesn't do i again.. My dddd channels don't wrk again.. Pls help?

@caspian22 read thru the page 99% of qsat servers are dead nothing is working on qsat , pls caspian22 we don't mention paytv channel name here pls edit modify your question again thanks for understanding

wealth014:
Please how can one locate his Qsat code in his Qsat decoder?

99% of qsat servers are dead you can't even check ur code until qsat return to normall
I will tell you how to check code in a short while

Goto xcam n click and press green button from remote control to get ur code

hugman:
@caspian22 read thru the page 99% of qsat servers are dead nothing is working on qsat , pls caspian22 we don't mention paytv channel name here pls edit modify your question again thanks for understanding

I see.. I av gone thru d posts.. But u knw mine has not worked 4 over 3 weeks now.. Its always writin scarmbled channel (i.e d ddddtv). D j**tv channels will wrk 4 seconds b4 dy wryt bad signal.. But AIT wrks shaa.. Nd cuts sometimes. When will it b solved , myn started late october.. Plss if there is anyfin u cn do?

I have read evry post in dis thread, i understand a few tins. @hugman,lemme just tel u simetins u shuld knw dat i noticed or dat happened. my sibling tld dat he used USB 2 play music, jjy tv channels hv 0 quality alwaiz.. D dxXXtv channels hv gud signal n quality just dat it keeps writin scrambled channel.. Also i dont knw d kind ov server i hav I want 2 hav dis CCcam, since it hardly interrupts.. Tel me more

hugman:

99% of qsat servers are dead you can't even check ur code until qsat return to normall
I will tell you how to check code in a short while

Goto xcam n click and press green button from remote control to get ur code

. Thanks man! Its understood.

Pls how can one install a software into his Qsat after downloading it from the net with one's phone?

wealth014:
Pls how can one install a software into his Qsat after downloading it from the net with one's phone?

Goto page (0) the answer is there

Almost all qsat avatercam now working pls change ur sim if ur qsat is not working

NOTE
IF YOU ARE USING QSAT 23G PLS DON'T DOWNLOAD ANY SOFTWARE ,ALL QSAT 23G WORKING IS ONLY THE OLD QSAT LIKE 11G AND 13G THAT NEED TO DOWNLOAD FIRMWARE IF YOU HAVE TRY ALL SIM N NOT WORKING B4 YOU DOWNLOAD FIRMWARE

hugman:

Goto page (0) the answer is there

. Thanks hugman,I hv seen it. But mine is still not up-Q13g. Haven't done any upgrade. What do I do.

Hi,

Newbie here.

Please I have AZSKY G1 GPRS ADAPTOR.

How can I upgrade the software to watch DSTV channels?

Thanx

im using q11g, how can i download d new software
email: prinzadelawson@gmail.com

hugman:
NOTE
IF YOU ARE USING QSAT 23G PLS DON'T DOWNLOAD ANY SOFTWARE ,ALL QSAT 23G WORKING IS ONLY THE OLD QSAT LIKE 11G AND 13G THAT NEED TO DOWNLOAD FIRMWARE IF YOU HAVE TRY ALL SIM N NOT WORKING B4 YOU DOWNLOAD FIRMWARE

Can I load avartarcam on esat?