salmaz:

This tutorial explains how to change your
MTK android IMEI to a Blackberry (Or, any
device IMEI) using MTK Engineering MOD(does not require root access)
downloadable from the Google PlayStore.
1- Download MTK Engineering Mod from
the PlayStore.
2- Open/Lunch the MTK Engineering Mode
on your phone.
3- Click/Select MTK Settings.
4- Navigate left to Connectivity .
5- On the connectivity panel, select CDS
Information.
6- On the CDS section, select Radio
Information.
7- Now, select either the SIM1 or SIM2,
depending on whichever SIM you wish to
change its IMEI.
8- On this page, click on the AT+ and type E. About four
(4) options should be presented to you, just
choose either of this options below:
AT+ EGMR=1,10,”” - for SIM 2
AT+ EGMR=1,7,”” - for SIM 1
Don’t forget to put the IMEI you wish to
change to in-between this signs “” above then put cursor between AT and +, tap the space bar
9- Now, tap/click the Send AT Command
option.
10-Reboot your phone

pls bro can dix method work on infinix X700.pls urgent answer is needed

cooljoe13:
Pls o. The tecno f6 whatsapp group or exist o. Abeg drop ur numper. Thanks

Please add me to the group 07063506340

kings11ng:

I know this procedure but the problem is that it doesn't work on kit Kat device like f6. have tried it severally and it keep saying not available for user build.I left a space after AT it says command msent but when I check my imei with *#06# it still remains the same

The procedure works for Kitkat devices including Tecno F6, check the steps again and note that *#06# sometimes shows only sim1 imei. Use the 15 digit imei number on phone 1 and reboot after changing it.

Flobakd:

pls bro can dix method work on infinix X700.pls urgent answer is needed

Yes, it's an MTK device so it should work on it.

It seems this thread don't have a WhatsApp group. Though someone opened it but I've dropped my number for longer to be added.. Same with my friends too. I've opened a WhatsApp group for F6. If you are interested, drop your number or add me on 07063506340

olayoungz:
It seems this thread don't have a WhatsApp group. Though someone opened it but I've dropped my number for longer to be added.. Same with my friends too. I've opened a WhatsApp group for F6. If you are interested, drop your number or add me on 07063506340

add 08086574771 thanks

Add me abeg....

08107728484

Apollux:
add 08086574771 thanks

Added

CODEEATER:
Add me abeg....

08107728484

Added

08067419492

CODEEATER:


1. Use my method

2. Did u reboot?

3. Is d Imei valid?

its a valid Imei n it still doesn't Change

kings11ng:
its a valid Imei n it still doesn't Change

try adding space between the AT

08036278798..add me also.

CODEEATER:
try adding space between the AT

I did that n it said command msent but if u check with *#06# the Imei remains the same

drop ur pin 4 bbm group

kings11ng:
I did that n it said command msent but if u check with *#06# the Imei remains the same

Reboot your phone..

Pls, i tried all d process usin both MTK and Mobile Uncle.. Still showin me.. Command not for user build. somtin? Pls help!!!
And again i ask please, can Fifa 13 play fine on F6??Dat game is my baby.. D whole idea behind buyin of dis fone

OrangeDream:
Pls, i tried all d process usin both MTK and Mobile Uncle.. Still showin me.. Command not for user build. somtin? Pls help!!!
And again i ask please, can Fifa 13 play fine on F6??Dat game is my baby.. D whole idea behind buyin of dis fone

Seriously.. What's this craze about watsapp +


Anyway... Yes FIFA 13 and 15 work perfectly

Abeg how do I fix the battery draining issue of this f6 it's always discharging fast even when I plug it to the charger especially when it's below 70%......and who's enjoying his f6 here ?

My tecno f6 4 sale. #15k


https://www.nairaland.com/2086648/days-old-tecno-f6-sale

There is a new firmware update for Tecno F6! How can we make an update now that cwm recovery installed on the phone?

https://m./1527589010846110?refid=27


Tecno android group on Facebook go and join

guys help my f6 is bricked was trying to update the firmware what do i do . i dont have cwm recovery....pls help o

kippo:
guys help my f6 is bricked was trying to update the firmware what do i do . i dont have cwm recovery....pls help o

Is your phone rooted? Did it got stuck at tecno logo?

It didn't even reach tecno logo it just stops at the experience smart life and goes off. When it comes on again it shows the smart life ish for few seconds and pops up "no command" with android robot..... Pls what do I do?.... I don't have root permission

Manual Driver and Clockworkmod installation ; Backup and
restore
This method assumes you neither have access to a working
phone of the same model nor have clockworkmod installed on
the bricked phone but have downloaded / have access to the
clockworkmod backup of the same model
1. Download PdaNet
2. Download MTK Droid tools
3. Get the the boot.img for your phone type from someone who
has the same phone as your bricked one
or download boot.img for your Tecno phone.
4. Still with the phone connected, extract and launch MTK Droid
tools (green logo)
5. MTK Droid tools should display your phone's details and the box
at the bottom should be yellow
6. If it doesn't, ensure the drivers were correctly installed then
boot the phone into factory mode (volume decrease + power
button)
7. MTK should now detect and display the phone's details
8. Click ROOT at the bottom, select Yes / Grant to any prompt
on phone or PC and wait till the box turns green
9. When the box turns green, click on the root, backup, recovery
tab
10. Click to choose boot.img file
11. Click Recovery and Boot then navigate to the boot.img from
3 and select it
12. Click yes to every prompt
13. When asked, click yes to boot into recovery mode
14. You should now have Clockworkmod recovery installed on the
bricked Tecno phone from which you can do a restore, wipe cahe
partiton, wipe davlink cache, reset to factory state or flash a
new stock or custom ROM

draxler15:
..and who's enjoying his f6 here ?

MEEEEEE

This guide will explain an easy method of installing Mediatek /
MTK drivers for your phone on a PC.
Requirements
* PC
* USB cord
* A Working phone who's drivers you wish to install
* Download PdaNet
Procedure
* Enable USB Debugging on the working MTK phone (Settings >
Developer options > Tick USB debugging)
* Connect the working phone to PC with USB debugging enabled
* Install PdaNet on the PC
* When prompted to select phone type, choose "Other"
* At the end of PdaNet installation, you should get a "Drivers
successfully installed" message.
* Exit PdaNet in system tray (bottom right corner of PC)

https://www.dropbox.com/s/n4f4upag52p20xf/PdaNetA4126.exe?dl=0

Here's the download link for the boot.img file
https://www.dropbox.com/s/3ulii0chdm36omd/boot.img?dl=0

Download the latest version of MTKDroidTools.exe from the Internet

So anything new on the new update.

towncheerup:
So anything new on the new update.

Don't know what's new in the update. I have cwm recovery installed on my phone so can't install the firmware update. Wishes to know what the update offers!

salmaz:

Don't know what's new in the update. I have cwm recovery installed on my phone so can't install the firmware update. Wishes to know what the update offers!

Stock recovery

https://www.dropbox.com/s/olt2277eib7pa85/f6%20stock%20recovery.zip?dl=0

towncheerup:


Stock recovery

https://www.dropbox.com/s/olt2277eib7pa85/f6%20stock%20recovery.zip?dl=0

We're you able to flash the update.zip cos mine crashes and said installation aborted probably I've deleted some applications that comes with the original stock rom