goforwardagu:
hmmmmmmmmmmm i like this dearie

keep it up

following you closely

oluwadeeboi:
Ohkay, thnx.. Please how do you measure and cut armhole for men across all sizes? (2) is there a particular shape or pattern the armhole should look like? Thanks in anticipation

estyy2:
To measure armhole for male,d standard measurement is 9" but for a bigger person, u can use 9.5", from shoulder point,measure your 9" down, den use ur french curve. But not dat u won't cut d armhole in d way a female own is being cut. See rough sketch below. I trust dis wld help.

oluwadeeboi:

Yea,it did..altho I dint rili see the picture clearly,the explanation is ok. What about the armhole width, I believe you undastand what I mean by that? That place where the curve ends, what is the measurment?

muskham:
How to measure iro and buba on myself is what i need pls

ozedresources:
Hi could u pls explain how to cut and sew off shoulder padded blouse, just like the ibo type of blouse. Thank u.

estyy2:
Measure your chest circumference,then measure length of armhole 9" to the line of chest,see sketch. For the other sketch, zoom it,you'll see clearly.

SEAme:
Good day ma, pls how do I draft an A-line skirt? Thanks

estyy2:
Draft your normal straight skirt&add 4" or 6" (depending on how flare you want it). See sketch. Zoom to see diagram clearly.

Ernaal:
Could u pls expantiate on d jumpsuits......or probably explain d trousers.Its an overlap jumpsuit dat I wanna make.Pix will help.Tanxxx

estyy2:
To draft jumpsuit, measure your bodice i.e top from shoulder to waist &add extra 1", then your trouser, add 1" to d crouch depth, the 1" is for seam allowance. See rough sketch below

mimiejacobz:
Nyc thread, please give me the details about breastpad

estyy2:
For me, I full padded breast, i.e the wadden will not be cut with the bust size rather,it will full padding. . To make a padded blouse, you need the following measurement point to point, upper bust,bust, underbust,waist&hip. Fold your fabric into 2, measure the widest part of Your blouse which is the bust add 4"s/a, then measure your point to point,it should either be 4 or 4.5",then add anoda 0.5" to the point to point for joinin,assumin you are using 4.5 as your point to point,when u add the 0.5",u'll have 5",add anoda 0.5" to d 5" that will give you 5.5", from that 5.5" draw a stright line down,measure 0.5" to d lefr&to the rightfrom d point to pointand do same for the waist too,then cut out d 0.5" i.e the dart,following the shape,once you are through cutting,you should be able to achieve d diiagram 2. Pls zoom picture to see clearly.

mimiejacobz:



tnx alot

noncy21:
what a lovely thread. pls ma teach me how to draft and cut ladies jacket. tnx ma.