Wow nice building

The 3D is fine but I observe the following
1. The pad footing is inadequate
Land in ondo and it's environs have a bearing capacity between the range of 150 - 200kN/m2.
With this bearing capacity you need a pad footing of minimum 1200mm x 1200mm for the duplex.

2. The depth of the foundation is inadequate
Foundation depth is a function of groundwater and soil conditions. A duplex should have a minimum depth of 900mm to the surface of the strip supporting the foundations wall

3. The thickness of the pad can be a minimum of 300mm while that of the strip carrying the foundation wall can be 150mm since the load is carried by the column in a frame building

Thanks bro

Our work on site today

Thanks bro

Our work on site today

Update on site as we almost conclude the sand filling and soakaway digging

More

Happy sunday

Hello all

Nice work...Jah Bless you for this post...Following this thread like Isrealites following Moses....

Thanks a lot more pix later on

Hello all and congratulations on our newly elected president

We just concluded our german floor yesterday and here's the process update so far

Our number are still

07014709098,07031886484
Bbm27afc1c0
Email johnontop14@yahoo.com

Good pm all

I just want to share more on the concluding part of the german floor before show the job done today on the block work

mufutau55:


Wow. Nice dry land...

Hajji M.

Dry land cost less?

shinejackie:
Nice work, wont u do german floor on this building or because it is a dry land it can be ignored......

gr8 question. Was about to ask

Empiree:
Dry land cost less?

Land cost depends on where you are buying it and also on "demand and supply"..
But it will cost less for the buyer to develop it because of the reduced cost in the type of foundation that will be used..

Hajji M.

more on the progress on site

mufutau55:

Land cost depends on where you are buying it and also on "demand and supply"..
But it will cost less for the buyer to develop it because of the reduced cost in the type of foundation that will be used..

Hajji M.

That's very true sir the land is very dry and strong

More as the setting continues rings was brought to site to mount in the well dugged

By the close of the days work we achieved this

eghosajohnny:

That's very true sir the land is very dry and strong
More as the setting continues rings was brought to site to mount in the well dugged

Thank you sir. Keep up the good work.

Hajji M.

mufutau55:


Thank you sir. Keep up the good work.

Hajji M.

Good all and to my very oga hajji M how r you doing today

Here are some more update on our ongoing project as we start with lintel work today

More on the progress

nice work,following u lk twitter

Hello all today we've started with the lintels carpentry work and some other part that's raised too

Call us for your Electrical and Mechanical Design drawing and installation.

08051750560, 08033643191

E-mail: atope23@live.co.uk, topselg.engineering@gmail.com

You can visit our thread:
https://www.nairaland.com/1804476/complete-package-design-drawing-electrical

https://www.nairaland.com/1233943/contact-us-electrical-mechanical-plumbing/9

Thanks

Happy weekend and I hope your decision today stands for changw

We are casting the lintels now see progress of work done so far

More pics

More pics. Ongoing soakaway

Weldone bros.it seems the curve block setting in front here is the stairs hall. ....if so where is the starter bars?

My oga thanks a lot at least for commenting but the fact remain that starter will be done as we prepare for the decking that's certain just didn't do it now boss

Johnny, I'm following silently.
You're doing a nice job, stay the course in all aspects.
Have a nice weekend.

eghosajohnny:
My oga thanks a lot at least for commenting but the fact remain that starter will be done as we prepare for the decking that's certain just didn't do it now boss

eghosajohnny better tell segcymoor where u keep the starter bar because he has done similar one for clients. he has a-z of this building on his head.
i know what i am saying.