texas07:
Dat means we can't watch qsat again

Qsat will be back codedly

Pls hugeman any help on how to input Bisskey on qsat q28 because I try to input tv3 ghana bisskey but is not working on it and d bisskey is still working on other decoder but I don't know why it is not working on qsat q28

hugman:

Qsat will be back codedly

Pls can i have ur email tnx

hello hugeman answer my question now whats wrong? this us not d first time I am asking u question if u don't have any answer u let me know instead of keeping deaf hears

letra123:
Pls hugeman any help on how to input Bisskey on qsat q28 because I try to input tv3 ghana bisskey but is not working on it and d bisskey is still working on other decoder but I don't know why it is not working on qsat q28

Tv3 in ds** does not use biss key
Is only the tv3 in Asta 28e that uses biss key

Select d Tv3 on multitv channel, Goto Xcam setup, open patch, u'll c Biss key, edit it & add ur freq, d nxt box under it, leave it 0000, den enter Biss key in d last box & press ok 2 save. Da

texas07:


Pls can i have ur email tnx

Hugmanling@gmail.com

For those of you who don't know, qsat q28g and qsat q26g are bliking on 22w

@ hugeman tanx for ur reply but the issue is this I have q13 and I imputed the tv3 ghana biskey it worked fine on it but I don't really know what is causing the problem on my q28 or have u try inputting tv3 ghana bisskey on urs I mean q28 ?.. Pls reply

I have even done factory reset many times still d same Pls do u have d link to qsat q28 firmware. so dat I can update it with another better firmware Pls...

hugman:
For those of you who don't know, qsat q28g and qsat q26g are bliking on 22w

Sir, please I don't get this. You mean I should try 22w transponder to get paytv channels and are presently showing with 28g and 26g?

hugman:

Hugmanling@gmail.com

Am using q28 but hw do i get dis 22w, do i need to turn my disc

letra123:
I have even done factory reset many times still d same Pls do u have d link to qsat q28 firmware. so dat I can update it with another better firmware Pls...

Do you have the Xcam setup on your qsat q28g?
Tv3 sometimes goes off air, try another time.
Qsat q28g is new no need for new firmware for now

tafrica:

Sir, please I don't get this. You mean I should try 22w transponder to get paytv channels and are presently showing with 28g and 26g?

Qsat q26g and qsat q28g have two different pay TV
One is on eutelsat 36e and the other is in 22w, you need two dish for this, one dish facing East while the other dish facing west

texas07:


Am using q28 but hw do i get dis 22w, do i need to turn my disc

You need another dish to face the west on 22w
Note :
Eutelsat 36e dish facing the sun in the morning while the other dish 22w facing opposite the sun in the morning

hugman:


You need another dish to face the west on 22w
Note :
Eutelsat 36e dish facing the sun in the morning while the other dish 22w facing opposite the sun in the morning

what is the tp for this 22w Make i tap... abs which channels dey?

hugman:


Qsat q26g and qsat q28g have two different pay TV
One is on eutelsat 36e and the other is in 22w, you need two dish for this, one dish facing East while the other dish facing west

Thanks for the reply.
I have two dishes actually. Does 22w direction open paytv channels as the ones on 36e or it opens FTA channels. Thanks for your tips.

hugman:
Tv3 in ds** does not use biss key
Is only the tv3 in Asta 28e that uses biss key

Select d Tv3 on multitv channel, Goto Xcam setup, open patch, u'll c Biss key, edit it & add ur freq, d nxt box under it, leave it 0000, den enter Biss key in d last box & press ok 2 save. Da

Pls am interested in this...mine on q23g hasn't bin showing too...when following this proceedure...what is the frequency I will use?
Pls what is the frequency I will use and what is the bisskey?

All qsat are online since yesterday codedly

Please send me an update link for q13g and the man for the server adenuga or the yellow yellow. Please kindly send it to my email on onayigats@yahoo.com

hugman:
All qsat are online since yesterday codedly

hugman:
All qsat are online since yesterday codedly

My q26 is still not showing "welcome to the server" or descrambling any paytv channel.
When is Q26 coming back? Thanks

pls house what can i do to boost gsm service network signal in my home.... even when i make calls emptyhen is a complete write-off
etisalat is still fair and zain.

My G1+ double light works (back then) but qsat seems to be a learner as the thing no gree connect.
pls help

FOR THOSE QSAT THAT ARE NOT SHOWING PLS DOWNLOAD THE FOLLOWING FIRMWARE May 2015

FOR QSAT Q28G
https://www.dropbox.com/s/c3u3zcdlo20efwb/1512Combo_Q28G%28S2%20T2%29_CAR_V7.04.71_20150311.bin?dl=0

FOR QSAT Q26G https://drive.google.com/file/d/0B0RADSNmMIPRQmlLbVlzQ3V1STg/view?usp=sharing

FOR QSAT Q23G
https://drive.google.com/file/d/0B0RADSNmMIPRRXYzam12U1VjR0k/view?usp=sharing

FOR Q13G
https://drive.google.com/file/d/0B0RADSNmMIPRaVREbDdqcHJBVVU/view?usp=sharing

FOR QSAT Q11G
https://drive.google.com/open?id=0B0RADSNmMIPRcFh0ZncxVENtTE0&authuser=0

QSAT 11+
https://drive.google.com/file/d/0B0RADSNmMIPRRkQ5MXBUQS01VzA/view?usp=sharing

QSAT 13+
https://drive.google.com/file/d/0B0RADSNmMIPRQ2NWSVYwQ1lqaU0/view?usp=sharing

QSAT 16+
https://drive.google.com/file/d/0B0RADSNmMIPRY3FnZ1hCYW9WbFE/view?usp=sharing


METHODS TO UPGRADE QSAT FIRMWARE

1. BY FLASH DRIVE

2. ANDROID PHONE WITH NO VIRUS SD CARD


1. BY FLASH DRIVE
UPGRADE OF FIRMWARE IN QSAT RECEIVER

1.Remove sim card b4 upgrading

2. is wise to use generator because any blackout in power supply render your iks qsat receiver dead on the spot

3.download precise firmware of the receiver into USB flash drive file usually end in .bin

4. insert USB flash to your iks receiver
on remote control
click menu button -
click upgrade
click USB/card upgrade
select the precise qsat firmware and click to start upgrading
after it completed your qsat receiver



BY ANDROID PHONE

HOW TO USE ANDRIOD PHONE TO UPGRADE FIRMWARE
IN QSAT RECEIVER
it safe to upgrade qsat firnware with andriod phone first
scan ur andriod phone with active anti virus to ensure that
there is no virus on the phone and on the sdcard
pls use fresh sdcard for easy identification and no
problem in the process of upgrading and ensure your
andriod phone is properly charge and stable battery
1.Remove sim card b4 upgrading
2. is wise to use generator because any blackout in power
supply render your iks qsat receiver dead on the spot
3.download precise firmware of the qsat receiver into
andriod phone on sd card , file usually end in .bin
4.after downloading the qsat firware connect USB from ur
andriod phone to your qsat receiver
on remote control
click menu button -
click upgrade
click USB/card upgrade
select the precise qsat firmware and click to start
upgrading
after it completed your qsat receiver will reboot itself
5. now goto menu-setting-xcam-acamhd change active
to on
6. goto setting -ethernet config and click and change to
gprs goto to config and select ur sim network.
your qsat now working with the new firmware perfectly

hugman:
FOR THOSE QSAT THAT ARE NOT SHOWING PLS DOWNLOAD THE FOLLOWING FIRMWARE APRIL 2015

FOR QSAT Q26G https://drive.google.com/file/d/0B0RADSNmMIPRQmlLbVlzQ3V1STg/view?usp=sharing

FOR QSAT Q23G
https://drive.google.com/file/d/0B0RADSNmMIPRRXYzam12U1VjR0k/view?usp=sharing

FOR Q13G
https://drive.google.com/file/d/0B0RADSNmMIPRaVREbDdqcHJBVVU/view?usp=sharing

FOR QSAT Q11G
https://drive.google.com/open?id=0B0RADSNmMIPRcFh0ZncxVENtTE0&authuser=0

I downloaded the software for my qsat 23g and it in the process of upgrading it says NO MATCH FILE. What else can i do to get it working. Thanks

%

hugman:


First download the lower version of your qsat firmware b4 download this latest one

What your qsat firmware?

The initial version was 6.11, i downgraded to 6.07, 6.05 and 6.03, still not able to upgrade to this new version. The message is still no match found

lanre2009:


The initial version was 6.11, i downgraded to 6.07, 6.05 and 6.03, still not able to upgrade to this new version. The message is still no match found

Do factory reset downgrade to your qsat q23g to firmware version v6.03 b4 proceeding confirm working

SOLUTION FOR QSAT Q23G NO MATCH FILE

IF you have the problem of no match file when trying to upgrade your qsat q23g do factory reset downgrade to this file first
https://www.dropbox.com/s/n2h3fd6cr52qilf/Q23G_STG3_2014.6.3.bin

B4 upgrade with this latest one below

https://drive.google.com/file/d/0B0RADSNmMIPRRXYzam12U1VjR0k/view?usp=sharing

SOLUTION TO QSAT DOWNLOADING FROM TS / BLUE SCREEN / STATIC LOGO

IF your qsat is showing downloading from TS or have blue screen or qsat logo then do the simple step below to make it work normal

Two method to correct this
1. By flash drive
Insert flash drive contain your qsat firmware on a pc rename the .Bin file to .Rom then insert your flash drive on your qsat power it on and wait for qsat to do automatic correct of your qsat in few minute your qsat now works normal

2 by android phone,
Locate your qsat firmware ware with file manager on your Android and rename the .bin file to .rom save and connect your Android to your qsat and wait few minute for qsat to automatic correct your qsat firmware


SOLUTION TO QSAT SHOWING NO MATCH FILE WHEN UPGRADING

All you have to do is first upgrade with the lower versions of your firmware if one does not work look for another lower version firmware of your qsat b4 upgrading to the latest firmware

hugman:


Do factory reset downgrade to your qsat q23g to firmware version v6.03 b4 proceeding confirm working

Finally got it working after first downgrading to v6.03 then upgrading to the newest software; i had to do some configurations (editing and adding some transponder settings) because the upgrade wiped off all my channels. Thanks i really appreciate.

how do i get my account back after upgrading on q26g?

I have done my upgrade but is not showing me connect to server on my q23g. Wht may b d problem nw and even my Q28g is not even showing

lanre2009:


Finally got it working after first downgrading to v6.03 then upgrading to the newest software; i had to do some configurations (editing and adding some transponder settings) because the upgrade wiped off all my channels. Thanks i really appreciate.

Is ur qsat showing nw