DanIndia:
WOW. Thanks for sharing, snipesdam.

Let's hope someone will show up for this position. Do you have more details ? Salary, term etc ?

It's very important. The head of SOL here in PH called me and requested for candidates for the test tomorrow. Pay is 70 to 90k

What track are you currently working on ? Anyone planning to go via the Collaboration route ? That is all way the way from CCNA Collab ?

rhymz:
no need to argue over this anyway..... Would give you guyz a heads up when I am ready to get it for RnS fir now I need to round up the track I am doing presently.

Good evening guys.
please I'm an accounting graduate,but I want to go into IT. where do I start?.... I am currently training on taking A+ exam,but I don't have much materials to prepare for the exam. Please your advice would be appreciated.

HI guys, how have we being. I wanna enjoin us to like the Cisco Study Forum Facebook page. Guess we can all pick a few things from there as we get better daily in this field.

Just search for "Cisco Study Forum" on Facebook. It has the chuck Robbins as the profile picture

Best wishes

snipesdam:
Guys whats up here........... this thread is getting bored oooo. Lemme assume we are all studying shaa Just passed 300-101

Grats, I hope that you obtain your entire CCNP R&S in no time

You're already taking the right step. After A+, go N+ - don't write the certs. Just get the knowledge and then get on with CCNA. Read as much as you can. Practice! Practice!!

Smeeky:
Good evening guys.
please I'm an accounting graduate,but I want to go into IT. where do I start?.... I am currently training on taking A+ exam,but I don't have much materials to prepare for the exam. Please your advice would be appreciated.

By the way, what did you study with ? 100% GNS3 ? Any other simulators ?

snipesdam:
Guys whats up here........... this thread is getting bored oooo. Lemme assume we are all studying shaa Just passed 300-101

DanIndia:
By the way, what did you study with ? 100% GNS3 ? Any other simulators ?

GNS3 is a great SIM if you can't get live equipment. Packet Tracer is decent as well.

I know that. I was just checking with him. And you can't do so much with PT when studying for NP.

Fulaman198:


GNS3 is a great SIM if you can't get live equipment. Packet Tracer is decent as well.

DanIndia:
What track are you currently working on ? Anyone planning to group via the Collaboration route ? That is all way the way from CCNA Collab ?

I am currently doing collaboration, I am already CCNA collaboration certified and training for my CCNP level, currently reading and labbing CVoice, one of the five exams for CCNP Collaboration. Anyone interest in collaboration group studies on skype can can join me, I have a new study group i created some few days ago..... trust me, there is a lot we can learn from each other plus I currently have INE All Access Pass and plenty materials as well....Just looking for guys with the same zeal and interest to ginger me.....iron sharpeneth iron....I could also show you guys how we can create a VOIP network on GNS3 using CME. my skype group name is incrediblestev

This is already a study group. The most you can do is contribute and not asking people to follow your group. If you read the thread properly, it's a study group on where people share stuffs. If you've got anything to share, you can go ahead and share.

That being said, I don't really think you can lab CCNA collab effectively (I'm not saying it's impossible) but you'll have to configure a lot. Kudos on having set that up. How's it working for you ?
And the INE All Access Pass - how much did you get that for ?

incrediblestev:
I am currently doing collaboration, I am already CCNA collaboration certified and training for my CCNP level, currently reading and labbing CVoice, one of the five exams for CCNP Collaboration. Anyone interest in collaboration group studies on skype can can join me, I have a new study group i created some few days ago..... trust me, there is a lot we can learn from each other plus I currently have INE All Access Pass and plenty materials as well....Just looking for guys with the same zeal and interest to ginger me.....iron sharpeneth iron....I could also show you guys how we can create a VOIP network on GNS3 using CME. my skype group name is incrediblestev

DanIndia:
I know that. I was just checking with him. And you can't do so much with PT when studying for NP.

If you are doing CCNP switch, Packet Tracer 6.2 should suffice. There are a few things you can't do in route though for Packet Tracer.

What I find most useful is the Boson Net Simulator for CCNP if you are serious

incrediblestev:
I am currently doing collaboration, I am already CCNA collaboration certified and training for my CCNP level, currently reading and labbing CVoice, one of the five exams for CCNP Collaboration. Anyone interest in collaboration group studies on skype can can join me, I have a new study group i created some few days ago..... trust me, there is a lot we can learn from each other plus I currently have INE All Access Pass and plenty materials as well....Just looking for guys with the same zeal and interest to ginger me.....iron sharpeneth iron....I could also show you guys how we can create a VOIP network on GNS3 using CME. my skype group name is incrediblestev

Very good, INE has great material

DanIndia:
This is already a study group. The most you can do is contribute and not asking people to follow your group. If you read the thread properly, it's a study group on where people share stuffs. If you've got anything to share, you can go ahead and share.
That being said, I don't really think you can lab CCNA collab effectively (I'm not saying it's impossible) but you'll have to configure a lot. Kudos on having set that up. How's it working for you ?
And the INE All Access Pass - how much did you get that for ?

Urm.....I was actually referring specifically to people who are studying or training or have interest in Cisco collaboration, I know you already have a study group but I dont know how to join it and it is actually for RnS, right?

As for the possibility of labbing VOIP on GNS3, as far as the CCNA level labbing is concerned, you can do 90 percent of it on GNS3 of course with the exception of PSTN connection where voice interface cards like FXO/FXS can't be simulated buty setting up a call with CME, Cisco IP communicator and Vmware is very much possible. Your phones will run on virtual machines and actually call each whether on thesame network or using dial peers to route calls to another CME set up on your GNS3 topology is all achievable.

Besides, if you work for a Cisco partner, with your cisco ID associated to your company, you can gain a full 4 hour access to cisco Gold labs with CUCM and Unity and actually LAB on topics like MGCP, SRST, H.323 gateways and likes...there are cheaper options if you know how to go around it....

For the INE all Access pass, I subscribed for the one month plan.....you can get the cost of that from INE's website...not much

incrediblestev:
For the INE all Access pass, I subscribed for the one month plan.....you can get the cost of that from INE's website...not much

There was at one point a deal in which if you are a GNS3 user they had a special promotion.

SWITCH CP on PT, really ? There are so many options you won't find on PT. Most especially VLAN related.

Fulaman198:


If you are doing CCNP switch, Packet Tracer 6.2 should suffice. There are a few things you can't do in route though for Packet Tracer.

What I find most useful is the Boson Net Simulator for CCNP if you are serious

COOL stuff. And you have access to like all the stuffs available on INE ? If you're free now, let's do a run through on SKYPE. SHow me what you've got

incrediblestev:
For the INE all Access pass, I subscribed for the one month plan.....you can get the cost of that from INE's website...not much

ok so how do we go about that?....my skype id is incrediblestev

DanIndia:
COOL stuff. And you have access to like all the stuffs available on INE ? If you're free now, let's do a run through on SKYPE. SHow me what you've got

Adding you UP

incrediblestev:
ok so how do we go about that?....my skype id is incrediblestev

Why will anyone waste their time trying to do CCNP Switching on PT when GNS3 now does switching using IOU images with everything availble....I can help you set it up if you are having issues with it

DanIndia:
SWITCH CP on PT, really ? There are so many options you won't find on PT. Most especially V....LAN related.

GNS3 1.3.7 does full time switching, all you need to do use IOU L2 switches, this was Cisco's in-house testing Lab ios that runs on Solaris I think.... That is what i use for L2 switching and it supports everything, etherchannel, ports security, STP, Vlans and all

DanIndia:
SWITCH CP on PT, really ? There are so many options you won't find on PT. Most especially VLAN related.

Really? Give an example of VLAN related work you will not find on PT...(Keep in mind I'm referring to PT 6.2).

6.2 - I am not sure. Last time I checked, I had difficulties making some configurations.

Fulaman198:


Really? Give an example of VLAN related work you will not find on PT...(Keep in mind I'm referring to PT 6.2).

DanIndia:
6.2 - I am not sure. Last time I checked, I had difficulties making some configurations.

Anything you would like me to check and demonstrate for you?

I don't think so, boss. I am not sure if there is anything you'd like to share though. If there is, shoot.

Fulaman198:


Anything you would like me to check and demonstrate for you?

Have you heard of this competition?
https://m.facebook.com/story.php?story_fbid=885200134892259&id=879596015452671
Like the page too yo stay updated

Hi guys,

I have he latest Gns3 but I can't console into my L2 switches, is there a way around it??

Thanks.

incrediblestev:
Why will anyone waste their time trying to do CCNP Switching on PT when GNS3 now does switching using IOU images with everything availble....I can help you set it up if you are having issues with it GNS3 1.3.7 does full time switching, all you need to do use IOU L2 switches, this was Cisco's in-house testing Lab ios that runs on Solaris I think.... That is what i use for L2 switching and it supports everything, etherchannel, ports security, STP, Vlans and all

Nice one bro.. Pls could you share how you went about it. Thanks

Fulaman198:


Really? Give an example of VLAN related work you will not find on PT...(Keep in mind I'm referring to PT 6.2).

True PT for switching is way better if you using version 6.2.

aylive123:
Hi guys,

I have he latest Gns3 but I can't console into my L2 switches, is there a way around it??

Thanks.

Aylive I got your mail chat me up WhatsApp 08033288846