mustaphataofeek:
strong decoder 4922a and 4.5m dish forsale.08187206330

Eldorado382:
visit Najmsat.com for powervu of all sattellite that has powervu.

moses4all:
What can happen if i force srt 4920 sw into sr 8989hd please house am dying no hope.

ntyce:
Good day house,
Is there any installer based in Abeokuta who is vast in FTA, IKS etc
The service of one is needed urgently.

Thank you.

mustaphataofeek:
strong decoder 4922a and 4.5m dish forsale.08187206330

Eldorado382:
@Ben1daEbiri need contact of d technician preferably @ onitsha, enugu or it‘s sorroundings

harjirem:
Help ooo. I went to my friend haos yesterday so we are trying to track 24HD after all d effort d signal don't turn green, so i detect later dat d place is surround by mass(network). So we try canal france and is up to 83%
Anybody experience dis b4 should render solution. All cband network is not working in dis area.

Rainfade:
which area is that ? I have a solution.

Spy360:
I saw a viewing centre with 1.8m dish facing towards the sky, c-band. I was wondering if Irib is back or maybe there is something else.

eerekake:

Is eutelsat 10'east,they normally air constant feeds that show epl matches.

Spy360:
I saw a viewing centre with 1.8m dish facing towards the sky, c-band. I was wondering if Irib is back or maybe there is something else.

graphicicon:
@Odilibe, the pcr of KTN which u gave to me, after editing it, the channel audio still skip, am using srt 4922A decoder, my decorder pids is like this: vpid= 0100, Apid= 0102, PCrpid= 0100, but it still skip after changing it to one u gave to me

graphicicon:
@Odilibe, the pcr of KTN which u gave to me, after editing it, the channel audio still skip, am using srt 4922A decoder, my decorder pids is like this: vpid= 0100, Apid= 0102, PCrpid= 0100, but it still skip after changing it to one u gave to me

bountyhunter:
etcwest thats very possible, depends on ur dish size tho, smaller the dish the harder to get all tps on the attached sat...
best set up is 57e as primary, 68 attach above the primary lnb... many have done that set up on this thread, go thru it, there r pics too...
2.4m should do the job

etcwest:
thanx bountyhunter. can you direct me to the page on the forum where i can get this pic? have tried serching cannot find the pages

arbourboateng:
Bro why don't you tell us they have release sw for azsky g6 that enable power vu and possible auto row updating