Swanky092:
HEARD THE MBC ON BADR 26 DEG IS BACK. SOMEONE SHOULD CONFIRM PLZ.

mbc is using card it's not fta but today there is Sony tv of indian film like zee aflam on Sirius @ 4e 12268 27500

abdykb:

mbc is using card it's not fta but today there is Sony tv of indian film like zee aflam on Sirius @ 4e 12268 27500

Yes sirius (Astra @4'e)

pls what code is that and what is it used for ?.. MTN simpler server is no more going. Mine stopped working since yesterday..pls help

Swanky092:
[size=19pt]PLZ THOSE THAT HAVE TRACKED ABS 3, WHATS YOUR LNB SKEW? THANKS IN ADVANCE[/size]

.





11:00

How do i go about my Apstar 76.5'east?i've tried with my 1.8m,after tracking 68.5'east i place the 2nd lnb on top to get Apstar still no avail.Pls somebody should tell me how to go about it.

11766h 27500 is free again on 4.8/5 east

Swanky092:
HEARD THE MBC ON BADR 26 DEG IS BACK. SOMEONE SHOULD CONFIRM PLZ.

yea its back on 12265H27500

abdool09:
11766h 27500 is free again on 4.8/5 east

mine was cracking

abdykb:
Sirius is 4e and Abs3 is 3w.
that is,if dish is 1.8 the abs3 is between Sirius and nilesat @7w.
if the dish is 90,60,100cm the abs3 is towards going west from Sirius position.
Do this by moving the azimuth and elevation of the dish.
thanks you.

Please use up/ down, left/right to explain your point. Taking reference from Ses 5 and standing in front of dish. Thanks for the consideration.

Nnachi404:
very soon it will go off but if you still need it just get open view and have it in hd 4life like me

how much for openviw ?

eerekake:
How do i go about my Apstar 76.5'east?i've tried with my 1.8m,after tracking 68.5'east i place the 2nd lnb on top to get Apstar still no avail.Pls somebody should tell me how to go about it.

First, I don't know exactly what the difference should be in figure but this is how to go about it. You need an adjustable bar to hold the secondary lnb (Apstar 7@76.5E). You can start the experiment from 5cm gap, remove the Dish bar holder to be able to swing up and down. Once you get Apstar, put back the dish bar holder and then adjust the secondary lnb up or down. Getting the Ark first is important as adjusting the bend of the lnb holder is the key. A straight bar hardly works when trying to place a secondary lnb 4 or more cm away from the primary lnb. It normally needs a slight inside-bend. Attached LNB actually receives higher signal than the primary lnb because it makes the dish bigger. I couldn't get AXN and Animaux above 60% with main lnb but got 65% with attached lnb, so I mean getting better signal quality won't be a problem. I hope my explanation helps you.

Chinedu7:

First, I don't know exactly what the difference should be in figure but this is how to go about it. You need an adjustable bar to hold the secondary lnb (Apstar 7@76.5E). You can start the experiment from 5cm gap, remove the Dish bar holder to be able to swing up and down. Once you get Apstar, put back the dish bar holder and then adjust the secondary lnb up or down. Getting the Ark first is important as adjusting the bend of the lnb holder is the key. A straight bar hardly works when trying to place a secondary lnb 4 or more cm away from the primary lnb. It normally needs a slight inside-bend. Attached LNB actually receives higher signal than the secondary because it makes the dish bigger. I couldn't get AXN and Animaux above 60% with main lnb but got 65% with attached lnb, so I mean getting better signal quality won't be a problem. I hope my explanation helps you.

Can 1.8m dish do the above magic?I'm staying in yenagoa,Bayelsa state.

eerekake:
Can 1.8m dish do the above magic?I'm staying in yenagoa,Bayelsa state.

Yes, maybe not all tps but most tps.

eerekake:
How do i go about my Apstar 76.5'east?i've tried with my 1.8m,after tracking 68.5'east i place the 2nd lnb on top to get Apstar still no avail.Pls somebody should tell me how to go about it.

below 68.5 apstar7 is there.

umassor:
Contact me four your original star gold lnb and original old fuji lnb

@ umassor Pls i need a oneway star gold LNB, whats the cost and how will i get it at ota

sunene1, bountyhunter, chinedu7 and all other gurus here pls i need u guys help, am a newbie in dis stuf so pls pardon my annoying questions.


Am using a srt4992a, planning on upgrading my software to enable me use power vu but before dat i want to learn hw to track Channels on my own, am using a motorized dish dat has been set already and all i need to do is input d frequency and start turning my dish but inputing d frequency and satellites to d one i see on dis forum is a problem.


For example
4245V8544,

the 4245 is the frequency while the 8544 is d symbol rate Dan the 'V' is for the polarization, if am wrong pls let me know but if am correct then d plc i need to input dis frequency on my decoder srt4922a has a decimal point which i can't seem to remove and d symbol rate has a decimal point too, dis is where my confusion is, becus no frequency on dis forum has a decimal point. And even if i jst input it like dat it will look like dis 4.245 for d frequency and 8.544ms/s for d symbol rate, which doesn't work. So


my brothers i need ur help here

@all, all these channels on 11.766 H 27.500 on ses5 are cracking cracking badly, pls is it general?

mujaya1:
below 68.5 apstar7 is there.

If you are attaching lnb, then Apstar 7@76.5E should be on top of IS20 that is the primary lnb.

BrianRoss:
sunene1, bountyhunter, chinedu7 and all other gurus here pls i need u guys help, am a newbie in dis stuf so pls pardon my annoying questions.


Am using a srt4992a, planning on upgrading my software to enable me use power vu but before dat i want to learn hw to track Channels on my own, am using a motorized dish dat has been set already and all i need to do is input d frequency and start turning my dish but inputing d frequency and satellites to d one i see on dis forum is a problem.


For example
4245V8544,

the 4245 is the frequency while the 8544 is d symbol rate Dan the 'V' is for the polarization, if am wrong pls let me know but if am correct then d plc i need to input dis frequency on my decoder srt4922a has a decimal point which i can't seem to remove and d symbol rate has a decimal point too, dis is where my confusion is, becus no frequency on dis forum has a decimal point. And even if i jst input it like dat it will look like dis 4.245 for d frequency and 8.544ms/s for d symbol rate, which doesn't work. So


my brothers i need ur help here

You are right. You need to observe the decimal places. Your example is the way it will look. If you see 5 digits like 27500, it be 27.500.

For more unpopular decoders' powervu software download, use this link -
http://sky-satellite..co.ke/2015/10/all-china-hd-receivers-powervu.html?m=1

Hello house, My qsat q28g has stopped to unscramble powervu channels since thursday afternoon. Please anyone with assistance should kindly help. Thanks in advance.

ify4king:
mine was cracking

same n mine is 83%

graphicicon:
@all, all these channels on 11.766 H 27.500 on ses5 are cracking cracking badly, pls is it general?

yes it is crackin.

Chinedu7:

You are right. You need to observe the decimal places. Your example is the way it will look. If you see 5 digits like 27500, it be 27.500.

tnx alot, and pls hw do i add West and East degree to a new satellite i edited

and pls can i reach u on whatsapp?

abdool09:
same n mine is 83%

I have destroyed my 7E&4.8 for nothing

okoegualek:
I tried nailing Amos 5c/eutelsat 16 e together today on a 60cm dish in Kano,all to no avail,used digisat,powersat lnb.I only got tps on 12335,11884.But 10804,11138,11008 refused to come up,no matter how hard i tried.I went to buy 1 metre dish today to continue 2mao.If there are better sats here in Kano,other than this,pls @ all,notify me,as this is d first time i will tracking here in the North.Thank you all.FTA rules,one love.

hi can you please walk me on how to install astra 2b on digisat? I tried but the strength level is stuck at 60 while quality is zero. I've adjusted it to no avail.
my ish is why is the strength level not changing
what else do I need to do

okoegualek:
I tried nailing Amos 5c/eutelsat 16 e together today on a 60cm dish in Kano,all to no avail,used digisat,powersat lnb.I only got tps on 12335,11884.But 10804,11138,11008 refused to come up,no matter how hard i tried.I went to buy 1 metre dish today to continue 2mao.If there are better sats here in Kano,other than this,pls @ all,notify me,as this is d first time i will tracking here in the North.Thank you all.FTA rules,one love.

I need help on digisat

Good afternoon peeps.... Please I need ur help on this issue.....
I have a strong 4950h box which firmware was last updated sometimes in june this year. Whenever I try to upgrade its patch.. It identifies my flash drive but not the software. I've tried many kinds of flash... But they all behave the same. How do I resolve this issue?

Janyves:
Good afternoon peeps.... Please I need ur help on this issue.....
I have a strong 4950h box which firmware was last updated sometimes in june this year. Whenever I try to upgrade its patch.. It identifies my flash drive but not the software. I've tried many kinds of flash... But they all behave the same. How do I resolve this issue?

did you extract the software,cause its in zip format you need to extract it first

Chinedu7:

If you are attaching lnb, then Apstar 7@76.5E should be on top of IS20 that is the primary lnb.

Pls give me tracking tp for Apstar 76.5'east,i'm using 1.8m pf dish and 4922A decoder.If possible all tps.

fishbone65:
0000 3/5 BFBS -w- Irdeto2 NSS-12
West
Hemi
Forces TV -w- 109 409 Eng 8009
BBC One -w- 101 401 Eng 8101
BBC Two -w- 102 402 Eng 8102
ITV -w- 103 403 Eng 8103
BFBS Extra -w- 104 404 Eng 8104
Sky Sports 1 -w- 105 405 Eng 8105
Sky Sports 2 -w- 106 406 Eng 8106
BFBS Sport -w- 107 407 Eng 8107
Sky News International -w- 108 408 Eng 8108
Nepali TV -w-

someone told me he has a box that opens these irdeto channels. I dey find the key die, but if I can get the box, no problem.