ManirBK:
For the good of the room u have to explain how u did it so that our members can benefited from your thorough findings thanks.

ManirBK:
My set up Nss7 west,Abs3 63+% plus Ses 5.

pofolo:
.

yinka .
track ses5 with tp 12015, making sure you get to the point where your signal tends to drop if you shift your dish further to the right ( standing at the back of dish) , after youve gotten the best elevation. you then tighten your dish very well n d lnb for ses5.
You, thereafter attach another lnb just like we use to have for 36east ( pry) & 28.2east.

so, yes to your question.

idexpaul1:
pls show us the pics. which one will be at the top or bottom . I HV tracked ses 5 already. pls shed more light.

Easy023:
Can someone please confirm if those channels on abs3 are mpeg2.

Dreay01:
@ ManirBK, what is the size of your dish, would like to add ABS and ses 5 to my nss 7 west on my 1.35m dish. Please kindly guide me on how to do this? Thanks in advance.

ManirBK:
I used 1.8m. As u can see on my set up Nss7 is the primary lnb then abs3 and the third one ses 5 all at the right hand side.Firstly just go for ses5 12015v29951 the signal is high.if u need etv from astra4,your ses5 signal must reach 60%.then track abs3 with tp 11151v45001 at the centa between Nss7 and ses5.

Dreay01:
Okay, thanks, would do when I am less busy and send in pictures. I hope my explanation on powervu for q28g helps those in need.

routsz:
Fox Entertainment FTA on Astra 4A 11418V45000

ManirBK:
Yes yes a remarkable findings.thanks

Spy360:
If I do not track this ABS 3w today, come and carry my dish. Thanks.

Farwee:
good people. 2stv and vision4 tv , are they still in Amos/Eut 16? if not where are they now. 10q

ManirBK:
Pls i need that your dish wo!

routsz:
Fox Entertainment FTA on Astra 4A 11418V45000

Dreay01:
@ ManirBK, It is quite easy:
1. Click on XCAM setup
2. Click on Patch, then use the left or right key to move to POWERVU CAS.
3. Press the red button on your remote control to add the power vu keys.
4. Scroll to the Hex column and Press the yellow button on your RCU to erase all the zeros.
5. Input the key 00 and 01 all together, not forgetting to add 00 @ the end of key 00 and 01 altogether in the hex column
6. press the blue button on you RCU to confirm, Press the ok button, exit and you are good to go.
7. Enjoy

ben1daEbiri:
@pofolo From the pic you uploaded some days back:a combo of nss7w (MTN worldwide) and abs3w,what is the size of the dish?

pofolo:


1.8m

Dreay01:
Okay, it is quite easy combine both powerVU keys in a slot (I mean input the key 00 and 01 with 00 for both together in a slot, confirm, okay and exit) and you are good to go, I hope you understand. If you don't let me know, then I would send in a picture.

Jerri7:


Please attach the picture for clarity. And is it doing auto update?