Salutations,

This post will teach those of u with this device how to enable the 3G network mode, seeing that its a london or US phone that's only avilable with the edge network in naija.

I decided to do this because a lot of people were asking me for a walk through to solve this problem.

Here goes:

1. Make sure ur device is an at&t device:samsung galaxy sgh i527
2. Download qpst 2.7 build 402 and install on ur laptop or pc
3. Type this on ur dialer *#0808# to get to special mode and select the RANDIS option and save. Its different for the instructions in the site below.

4. Follow the instructions on this http://galaxys4root.com/galaxy-s4-tutorials/how-to-enable-t-mobile-hspa-aws-bands-on-att-galaxy-s4-sgh-i337sgh-i337m/

5. When u get to the part where u need to flash the qcn part...email me and il send it to u. Do not use the one in the site. Its for note 2.

Thats it.

Reboot after flashing the qcn file.

Then dial this *#*#4636#*#*. It will take u to a testing platform. Go to device info and change the network to wcdma only and then save. You should see a 4G sign sending and receiving signals where ur edge sign used to be.

Voila.

Just a side note

This process will Not work if ur IMEI number is damaged or has been delisted. To check this, go to www.imei.info, sign up and check ur IMEI status by copying and pasting ur IMEI number into the check engine. If no phone information comes up, I'm sorry, this solution is useless to u.


All the best guys.

Qpst 2.7 build 402 download.

https://www.dropbox.com/s/t531vkrampf4nll/QPST%202.7%20build%20402.exe?dl=0

Two things have I noticed.

316 views and not one response.

But

So many people whatsapping me and ask to walk them through this solution.

Pls stop it.


If u can't follows this walk through...i won't bother to help u do it.

It works smooth and perfectly.
Many thanks bro!
God bless!!

ogunn:
It works smooth and perfectly.
Many thanks bro!
God bless!!

Observing with big goggles

Votukpa:
Salutations,

This post will teach those of u with this device how to enable the 3G network mode, seeing that its a london or US phone that's only avilable with the edge network in naija.

I decided to do this because a lot of people were asking me for a walk through to solve this problem.

Here goes:

1. Make sure ur device is an at&t device:samsung galaxy sgh i527
2. Download qpst 2.7 build 402 and install on ur laptop or pc
3. Type this on ur dialer *#0808# to get to special mode and select the RANDIS option and save. Its different for the instructions in the site below.

4. Follow the instructions on this http://galaxys4root.com/galaxy-s4-tutorials/how-to-enable-t-mobile-hspa-aws-bands-on-att-galaxy-s4-sgh-i337sgh-i337m/

5. When u get to the part where u need to flash the qcn part...email me and il send it to u. Do not use the one in the site. Its for note 2.

Thats it.

Reboot after flashing the qcn file.

Then dial this *#*#4636#*#*. It will take u to a testing platform. Go to device info and change the network to wcdma only and then save. You should see a 4G sign sending and receiving signals where ur edge sign used to be.


Voila.

Thanks for this info bro, pls help me wit d qcn flashing part

ogunn:
It works smooth and perfectly.
Many thanks bro!
God bless!!

Pls kindly share with me the qcn file u use for sgh 1527, thats my only delay at d moment

Fiscabally:

Pls kindly share with me the qcn file u use for sgh 1527, thats my only delay at d moment

No one seems to help out here, too bad!

please help me with the flashing. I'm stuck at flashing the qpst

Hello votukpa. I have d same phone by at&t. Its on just edge. Formatted it. Even tried custom ROM. Nothing works until I stumbled on the this. Tried to email you but Its my first time trying to talk to any1 so I'm not sure if you got the email. Pls help

sleeksamurai:
Hello votukpa. I have d same phone by at&t. Its on just edge. Formatted it. Even tried custom ROM. Nothing works until I stumbled on the this. Tried to email you but Its my first time trying to talk to any1 so I'm not sure if you got the email. Pls help

Have u had a read of and tried the instructions above?

You said email u. I don't know how to send emails on nairaland. Just got used to mentions n replying.

Votukpa:


Have u had a read of and tried the instructions above?

sleeksamurai:
You said email u. I don't know how to send emails on nairaland. Just got used to mentions n replying.

Yes I did, but do u fully understand the instructions I outlined above First, so as do them??

Yes I do. The email part is the problem. Are Dere any risks involved? How do I get d code.

Votukpa:


Yes I did, but do u fully understand the instructions I outlined above First, so as do them??

sleeksamurai:
Yes I do. The email part is the problem. Are Dere any risks involved? How do I get d code.

first check if ur imei is damged or not...if it is not, send me a blank email so that i can email you the qcn file. it has a naira cost.

How much does it cost n how do I mail u from here? Kinda new to all this. I usually just read n pass through.

Votukpa:


first check if ur imei is damged or not...if it is not, send me a blank email so that i can email you the qcn file. it has a naira cost.

sleeksamurai:
How much does it cost n how do I mail u from here? Kinda new to all this. I usually just read n pass through.

What's app me
07037913006

My whatsapp is off. Having issues since I ported. Pin?

Votukpa:


What's app me
07037913006

sleeksamurai:
My whatsapp is off. Having issues since I ported. Pin?

7BF6E8B3

I sent u an invite days ago. U haven't accepted yet.

Votukpa:

7BF6E8B3

Hi Votukpa i'm stuck to the part where I need to flash the qcn . Can you send me the file plz ?

Thanks for this info bro, pls help me wit d qcn flashing part

Thanks for the info bro., I'm at the point were the qcn file is needed. lps help me with it

Votukpa:
Salutations,

This post will teach those of u with this device how to enable the 3G network mode, seeing that its a london or US phone that's only avilable with the edge network in naija.

I decided to do this because a lot of people were asking me for a walk through to solve this problem.

Here goes:

1. Make sure ur device is an at&t device:samsung galaxy sgh i527
2. Download qpst 2.7 build 402 and install on ur laptop or pc
3. Type this on ur dialer *#0808# to get to special mode and select the RANDIS option and save. Its different for the instructions in the site below.

4. Follow the instructions on this http://galaxys4root.com/galaxy-s4-tutorials/how-to-enable-t-mobile-hspa-aws-bands-on-att-galaxy-s4-sgh-i337sgh-i337m/

5. When u get to the part where u need to flash the qcn part...email me and il send it to u. Do not use the one in the site. Its for note 2.

Thats it.

Reboot after flashing the qcn file.

Then dial this *#*#4636#*#*. It will take u to a testing platform. Go to device info and change the network to wcdma only and then save. You should see a 4G sign sending and receiving signals where ur edge sign used to be.

Voila.

Just a side note

This process will Not work if ur IMEI number is damaged or has been delisted. To check this, go to www.imei.info, sign up and check ur IMEI status by copying and pasting ur IMEI number into the check engine. If no phone information comes up, I'm sorry, this solution is useless to u.


All the best guys.

i have emailed you but no response

Bro, my galaxy mega has bein lying lifeless for d past 5mths now, the repairers here cnt fix it, cnt find the right fill to flash it, u can hlp me pls

buckboi:

i have emailed you but no response

Didnt see a message.
Send whatsapp
07037913006