whyteboyz03:
Please I need new good tyres , 235/45R17 . them wan cut my head for ph

whyteboyz03:
Please I need new good tyres , 235/45R17 . them wan cut my head for ph

whyteboyz03:
@mexxy1 and @gazzuzz, I get u but I need new tyres but my budget is 15k each.

bestakara:
Good morning and Good sunday house pls i need your sincère help pls my Honda ex 1996 model had it timing belt cut on 1st of november 2015 and the belt were fixed and the car did not start, the mechanic said it has vend the valve and they grounded the top cylinder after word it was fixed after two day it packed up again was not starting i called another mechanic who also grounded the top and fixed it afterward the car was starting but was soaking oil in the plug and would move and stop afterward i called another mechanic who now grounded the top cylinder no oil soak engine not vibrating again but the only problem is when i move in a short while and match the brake ut trip off sometime while driving it goes off pls i need serious help.

whyteboyz03:
Please I need new good tyres , 235/45R17 . them wan cut my head for ph

vicbussi:
Oga gazzazu
I just join eod club 03. Then I discover it has issues the engine is a kind of vibrating when u put on D AC. Also when u start D car at times u need to put gear at times in neutral to start. What could be a issues

Thanks

nas00:


Is your Accord manual transmission?
Do you usually observe smoke coming out of your exhaust pipe when the engine is running?
Do you have to top off your engine oil in- between service intervals, to keep it at the recommended level?

While I await your answers, you can do this:

**Examine your engine mounts (popularly called 'engine seats'). There are four of them. One or more could be torn, and can give the vibration.

barnaby04:
Hello Guys,

I use an Honda Accord 2002 model and had cause to change the radiator recently due to overheating issues from single cell to double cell. Ever since I changed it, have not enjoyed the radiator for a day.

The issue is that I top water in the radiator every day which gives me concern a lot. As a matter of fact, whenever am travelling and has driven for a period of upto three hours, I need to park and top the water in it which would have gone down a great deal.

Have taken the car to two different mechanics to check but they have not been able to put a stop to this regular and daily topping of water even though they all says the radiator is fine and no area of leakage was found.

I need you guys advice because this issue is giving me a lot of concerns as I no longer uses a/c whenever am travelling now for fear of compounding the problem

whyteboyz03:
Good morning everyone . I finally bought the new tyres and fixed . despite doing this, my car still shakes when its on motion . Pls what do I do ? E don tire me . car is a 2003 Honda accord ( V6 ) .

GAZZUZZ:


describe the vibration properly. Is it vibrating when you accelerate hard, or vibration when you get to speeds of 60m/h or vibrations when you apply brakes?

whyteboyz03:


Vibration when I accelerate and from 20km/h to 60

nas00:
Luvinghubby: Sir, can I still get a direct tokunbo engine for a '91 Honda Accord (Halla)?

If yes, for how much will I get it at Oyingbo?
Transmission is automatic.

If no, what are the available options/ alternatives?

Thanks Sire!

GAZZUZZ:


the car must be really worth it...

GAZZUZZ:


CV joint inner side, also check engine mounts

whyteboyz03:



Please gazzuzz, what is CV joint ?

GAZZUZZ:


[img]https://encrypted-tbn2.gstatic.com/images?q=tbn:ANd9GcRbshc2_C04pQK8K0uajenFXp3v2Z_txcXNLvsGVkF2pHeXHtDJ[/img]

Click this link, seems image uploads have been blocked on NL

nas00:
Luvinghubby: Sir, can I still get a direct tokunbo engine for a '91 Honda Accord (Halla)?

If yes, for how much will I get it at Oyingbo?
Transmission is automatic.

If no, what are the available options/ alternatives?

Thanks Sire!

whyteboyz03:


Seems its the same with shaft right ?

luvinhubby:


Yes, same thing with drive shafts.

luvinhubby:

Provided it is not a carburretor engine cos available only in injectors.