Hi bosses i use a 2003 camry. The car refused to start last month and the Mechanic said it was rewires job to do. Apparently d fuses in d picture below are shaking. He put some wire in between it and said it was fine. Today d same issue occured i saw a road side rewire who said d right tin to do was to use screwdriver to bend d teeth of the fuse. It worked but when i got home same issue started. I suggested buying a new fuse they said it makes no difference dat it might also be slacked as well. Wat can i do to mk d fuses pin properly

You are bridging you fuse with ordinary wires? And people wonder why cars go up in smoke?

Change your ipdm (intelligence power distribution module) aka fuse box if you need a peace of mind. The excess touching it has received made it slacked. Let a much more experienced person get the job done. Seems from your explanation the contacts are not made well reason for the difficult start

sage50:
Hi bosses i use a 2003 camry. The car refused to start last month and the Mechanic said it was rewires job to do. Apparently d fuses in d picture below are shaking. He put some wire in between it and said it was fine. Today d same issue occured i saw a road side rewire who said d right tin to do was to use screwdriver to bend d teeth of the fuse. It worked but when i got home same issue started. I suggested buying a new fuse they said it makes no difference dat it might also be slacked as well. Wat can i do to mk d fuses pin properly

Why not simply head to your car breakers location and buy replacement fuse casing?

mayor2013:
Change your ipdm (intelligence power distribution module) aka fuse box if you need a peace of mind. The excess touching it has received made it slacked. Let a much more experienced person get the job done. Seems from your explanation the contacts are not made well reason for the difficult start

do u hv an idea d price range

mayor2013:
Change your ipdm (intelligence power distribution module) aka fuse box if you need a peace of mind. The excess touching it has received made it slacked. Let a much more experienced person get the job done. Seems from your explanation the contacts are not made well reason for the difficult start

come on Mr know all this is a Toyota not a Nissan, BTW it is intelligent not intelligence

Op Fuses that are continually blowing is not the fault of the fuses, there is a short to ground some where along that particular circuit, your rewire if capable should trace that Short circuit, if not, go yo another person, this is where the ECT2000 comes in to play but its an expensive tool.