WafiJoe:


You might want to state your number clearly, you could delete it off once you get added. or drop your email.

08052399682

Guru in d house! abeg make una help assess dis code oooo! d tin no gree submit oooo



var canIWatch = function (age){

if ((age > 0) && (age < 6)){
return("You are not allowed to watch Deadpool after 6.00pm.";
}
else if ((age >= 6) && (age < 17)){
return("You must be accompanied by a guardian who is 21 or older.";
}
else if ((age >= 17) && (age < 25)){
return("You are allowed to watch Deadpool, right after you show some ID.";
}
else if (age >= 25) {
return("Yay! You can watch Deadpool with no strings attached!.";
}
else{
return("Invalid age.";
}
};

.

yoyolagos:
Guru in d house! abeg make una help assess dis code oooo! d tin no gree submit oooo



var canIWatch = function (age){

if ((age > 0) && (age < 6)){
return("You are not allowed to watch Deadpool after 6.00pm.";
}
else if ((age >= 6) && (age < 17)){
return("You must be accompanied by a guardian who is 21 or older.";
}
else if ((age >= 17) && (age < 25)){
return("You are allowed to watch Deadpool, right after you show some ID.";
}
else if (age >= 25) {
return("Yay! You can watch Deadpool with no strings attached!.";
}
else{
return("Invalid age.";
}
};

yoyolagos you tried but you didn't perform the operation within the specified function in the proctor.. so define "canIwatch" as a function use age as the argument!

Umu101:

yoyolagos you tried but you didn't perform the operation within the specified function in the proctor.. so define "canIwatch" as a function use age as the argument!

na wetin I do now, or there another way of defining function in javascript aside using the format below?:

var function_name = function(arg){
action code

};

yoyolagos:
Guru in d house! abeg make una help assess dis code oooo! d tin no gree submit oooo



var canIWatch = function (age){

if ((age > 0) && (age < 6)){
return("You are not allowed to watch Deadpool after 6.00pm.";
}
else if ((age >= 6) && (age < 17)){
return("You must be accompanied by a guardian who is 21 or older.";
}
else if ((age >= 17) && (age < 25)){
return("You are allowed to watch Deadpool, right after you show some ID.";
}
else if (age >= 25) {
return("Yay! You can watch Deadpool with no strings attached!.";
}
else{
return("Invalid age.";
}
};

u can also use : function canIwatch(age)

and try testing for invalid age first. Albeit, I think the procter site has issues.

omonosa25:


u can also use : function canIwatch(age)

and try testing for invalid age first. Albeit, I think the procter site has issues.

ok

who don get boot camp invite?

WafiJoe:


Yes, I think so too. Good news is, there is a group already

kindly add me to the group 08160689706 "Wafijoe"

WafiJoe:


You might want to state your number clearly, you could delete it off once you get added. or drop your email.

...

Please Guys,

I have been running codes on the Lab and the error i get is "Error running script". I am not sure if the problem is with my code or with andela.

I know the lab wont accept code that is not correct but when i did the Movie Lab, despite the fact that i got "Error running Script", yet it submitted and i cant risk doing the same process with other Labs.

Pleas where do you think the problem might be, and please i will love to join the group created.

Thanks

Please add me ===> 08140572531

evergold:
Thank God, received the link on August 29th rounded up today.

Please i just started my own infact am at 19%, am having problems with the TAX LAB... Please can you be of help?

Xx

stevenson007:

Please i just started my own infact am at 19%, am having problems with the TAX LAB... Please can you be of help?

whatsapp me 08034449868

koderNeptune:
Please Guys,

I have been running codes on the Lab and the error i get is "Error running script". I am not sure if the problem is with my code or with andela.

I know the lab wont accept code that is not correct but when i did the Movie Lab, despite the fact that i got "Error running Script", yet it submitted and i cant risk doing the same process with other Labs.

Pleas where do you think the problem might be, and please i will love to join the group created.

Thanks

if it passed when you tested and, on submitting, it didn't say "your solution failed to pass all the tests," keep trying to submit. If it failed any of the tests, it would have been stated.

stevenson007:

Please i just started my own infact am at 19%, am having problems with the TAX LAB... Please can you be of help?

I am 67%...all quiz has been answered..it remains only the LABs now

Oahray:
Lol. You guys are funny. Andela wants people who are passionate about software development, who can learn fast and who can learn on their own. Doesn't matter if you are a novice, if you truly study the homestudy pack and do the codecademy tutorials, you'd get the hang of it. If it's just another job opportunity for you, don't bother. You'd end up frustrated.

The labs have two types of tests... A visible test and an invisible/hidden test.

If you have bugs in your code, read the last line of the debug message. You'd see where you made a mistake. You could also post the code here so others can help you debug. In the long run, it's better you do it yourself though.

Else if your code fails any of the visible tests, read the instructions carefully and check the tests tab to see what they are testing for.

Else if your code passes the visible tests but on submitting, you are told that if failed to pass all the tests, it's because there are hidden tests too. Read the instructions over and over again and fine-tune your code till it is accepted.

Else if you are simply told that there was an error running your script, then it's the Proctor/your network. Keep trying to submit.

PS: Before you ask, I'm not in Andela.

@Oahray

Mehn, it's frustration. I keep getting error running your script and am sure my code is fine cos I tested it on CLI.

baba11:

I am 67%...all quiz has been answered..it remains only the LABs now

i think i will go ahead and finish the quizes. and see what happens before the deadline. I have mailed andela taya.

realowded:


@Oahray

Mehn, it's frustration. I keep getting error running your script and am sure my code is fine cos I tested it on CLI.

has it passed the visible tests on the Proctor? If it has but keeps showing that error message (but not test spec failure) when trying to submit, confirm that there's no part of your code that could cause it to terminate prematurely when tested with strange test cases (for example, don't raise exceptions unless you are asked to). See if there's anyway you can fine-tune your algorithm to reduce runtime. Reload the page and keep trying to submit. It would eventually go through if it satisfies all test cases.

I might be wrong, but I think the frustration is part of the selection process. They want those who would keep trying no matter what.

You can also mail Andela, but don't expect to get anything more than "study your curriculum harder and keep trying." That's if you get a response that isn't automated.

realowded:


i think i will go ahead and finish the quizes. and see what happens before the deadline. I have mailed andela taya.

Logout and login again. See if there is progress in your percentage.

THERE IS AN ERROR/BUG IN YOUR CODE
Results:
Internal Error: runTests aborted: TestOutcomeEvent(handled=False, test=, result=, outcome='error', exc_info=(, TypeError("'int' object is not iterable",), ), reason=None, expected=False, shortLabel=None, longLabel=None) is not JSON serializable


please how do i eliminate this. Code runs on idle

amamazzing:
THERE IS AN ERROR/BUG IN YOUR CODE
Results:
Internal Error: runTests aborted: TestOutcomeEvent(handled=False, test=, result=, outcome='error', exc_info=(, TypeError("'int' object is not iterable",), ), reason=None, expected=False, shortLabel=None, longLabel=None) is not JSON serializable


please how do i eliminate this. Code runs on idle

let's see your code....

amamazzing:
THERE IS AN ERROR/BUG IN YOUR CODE
Results:
Internal Error: runTests aborted: TestOutcomeEvent(handled=False, test=, result=, outcome='error', exc_info=(, TypeError("'int' object is not iterable",), ), reason=None, expected=False, shortLabel=None, longLabel=None) is not JSON serializable


please how do i eliminate this. Code runs on idle

your code accepts an integer in a testcase as input. An integer cannot be looped over, that's why the TypeError.

Try to include a conditional statement. Like if it's not a dictionary, no gree! Do so and so (depending on what you are asked)... else, continue with the remaining code

WafiJoe:


You might want to state your number clearly, you could delete it off once you get added. or drop your email.

Please add me 08185478440

am Nurudeen, kindly add my number...even though I have not started the proctor. 08139143986

.

amamazzing:

.

sorry I didn't see this earlier. It doesn't look quite right... Your for-loop coming before your if-statement. If you pass in an int as 'staff' instead of a dict, the program would try to loop over it at that for statement, then realize it's an int which isn't iterable and you'd get a TypeError. Let the if isinstance() come before the for statement. Then...

You want staff to be a dict, but you seem to be treating it like a list/str/set. Em... Can I see the instructions?

Oahray:
sorry I didn't see this earlier. It doesn't look quite right... Your for-loop coming before your if-statement. If you pass in an int as 'staff' instead of a dict, the program would try to loop over it at that for statement, then realize it's an int which isn't iterable and you'd get a TypeError. Let the if isinstance() come before the for statement. Then...

You want staff to be a dict, but you seem to be treating it like a list. Can I see the instructions?

What's the right way to iterate over dict values. My code runs on idle

amamazzing:


What's the right way to iterate over dict values. My code runs on idle

did you run as unittest with the test cases on proctor?

Your method is fine, you can also loop over dictionary keys first using the .keys() method, then get each value with the key. ie

# pardon my indentation.
# after if statement to ensure staff is a dict

for oga in staff.keys():
. if type(staff[oga]) is (int or float):
. . #your remaining code

Oahray:
did you run as unittest with the test cases on proctor?

Your method is fine, you can also loop over dictionary keys first using the .keys() method, then get each value with the key. ie

# pardon my indentation.
# after if statement to ensure staff is a dict

for oga in staff.keys():
. if tupe(staff[oga]) is (int or float):
. . #your remaining code

thanks. Found the problem and submitted. Please can u delete the quoted code. Not correct and misleading

pls add me 07069701471