NairaBaba:
Latest updates

NairaBaba:
Latest updates

mufutau55:


Very good work NairaBaba. I will need info and cost on the fence razor barbed wire installation. Thanks.

Hajji M.

NairaBaba:
One bundle covers 10 to 12 meter. We bought those supporting angle bar at 300 per pieces.

NairaBaba:

When buying barbed wire, look for the one that doesn't rust overtime. Personally I don't know the difference. I believed what the seller said. Those wires in pics were bought at NGN 5400 Per bundle but I believe the price was outrageous. The supplier agreed to sell for 4700 per bundle as at last month but later insisted the price has gone up to 5400 per bundle. The wires are sold at IYANA IPAJA, OWODO IRON MARKET, ORILE ETC.

Note: I did not go to market to buy, but has somebody who supplied me for past project to deliver to site

NairaBaba:
They are exact replica of the picture you posted. God willing, I will get a closer picture tomorrow.

mufutau55:


.mHow many bundles and what range did it cover?

Hajji M.

NairaBaba:

We used a total of ten and a half bundle. The plot is about 140ft by 60ft.

NairaBaba:
INSTALLATION STEPS

1. The wires are attached/ secured to the supporting angle bar with binding wire, galvanized binding is better and very cheap. I bought 500 but was not enough.
2. Use mortal, more plaster sand and less or no sharp sand to secure the spaces between the angle bars for additional security because of big boys in case they cut it from the angle bars. And also make it difficult to lift it up and crawl under.

Note: 1.plaster sand binds more than sharp sand.
2.Galvanized binding wire will not rust for many
years
3. Many welders or aluminum fabricator can do
the installation. Hajj, The installation is very
easy. You can even do it once you know it or
See someone doing it.

NairaBaba:

We used a total of ten and a half bundle. The plot is about 140ft by 60ft. The number of bundle you will use is a function of how the wire are stretched during installation. For me I maintained average of 10 meter per bundle for better closeness.

mufutau55:


That is very good.. With that stretch it should be full enough... I may even make a 6-8 meters. I need it real full ni o.

Hajji M.

NairaBaba:

This is better but it will cost more quid.

pseudomonas:
Nice work nairababa. pls whats the cost of the pvc you used the installation cost too? was POP used at all in any part of the house? thanks.

mufutau55:


Are they the razor type ones like below? That is a good dangerous type... I like. Thanks.

Hajji M.

pseudomonas:
Nice work nairababa. pls whats the cost of the pvc you used the installation cost too? was POP used at all in any part of the house? thanks.

NairaBaba:


4 ft is 45,000 and 3 ft is 35,000. I have not check the steel thickness. The thickness of the imported plates will definitely varies and that will determine the prices.

NairaBaba:
Updates