Hello,
Are you a hobbyist?
Do you like Radio controlled crafts?
Are you interested in making your own crafts?

Let's discuss ideas here.
I will update with information on designing your own car or plane later.

ogocology:
Hello,
Are you a hobbyist?
Do you like Radio controlled crafts?
Are you interested in making your own crafts?

Let's discuss ideas here.
I will update with information on designing your own car or plane later.

Am here ...

mebad:


Am here ...

Welcome! I am actually working on a Quadcopter.
It was scheduled for test run today but one of the motors failed.
I have ordered for a replacement but will post pictures of the work so far.

Please stay tuned.

ogocology:


Welcome! I am actually working on a Quadcopter.
It was scheduled for test run today but one of the motors failed.
I have ordered for a replacement but will post pictures of the work so far.

Please stay tuned.

please also post the procedures of building the rf remote too

following

where are they

Pls where can I buy the tx and rx for rc car in lagos

Javen:
Pls where can I buy the tx and rx for rc car in lagos

Go to hub360.com.ng

Sorry, people.
I was actually working on a project and planned posting pictures and steps after I get it to work.
It was a quad copter. (You'll understand why I used past tense later)
I used the following:
4pcs 2212 1000kv brushless motors.
4pcs ESCs
Kk 2.15 flight controller
Turnigy 9x Radio Transmitter and receiver (8Ch)
Zippy 3000mah 3S lipo battery.

After setting up and configuration, I went outdoors to test the quad.

1st trial crashed into a tree. Luckily, no damage was done.
The second time, it gained altitude fast.
And in a twinkle of an eye, it disappeared into the sky.

A 3-hour long search couldn't find it. I'm still searching though.

So sad!

Javen:
Pls where can I buy the tx and rx for rc car in lagos

If I know exactly what you're looking for, I could help you buy from online stores.

Xway:
please also post the procedures of building the rf remote too

I will and with pictures too

Pls am currently working on a mercedes g wagon model, nd am having problems knowing where to get high torque motors nd rc receivers in lagos

franclinstiles19:
Pls am currently working on a mercedes g wagon model, nd am having problems knowing where to get high torque motors nd rc receivers in lagos

[left][/left]
What's your model's size? What size of motor are you looking for?
Not sure if you can get rc RX in Lagos. I usually buy from US or Singapore. You can also get them from China

I've built a radio controlled plane before and I've flown it a couple of times. It was really fun to after months of research, fly something I built with my own hands. It did come with its own set of challenges as everything I did was done manually. You can imagine cutting plywood and shaping them into several ribs (the wing profile) with just a saw and sandpaper. It was well worth it anyways. Unfortunately, we don't have open spaces around and where I used previously is not so conducive so my plane is disassembled and chilling off in my wardrobe.

following....

One more

brendan007:
I've built a radio controlled plane before and I've flown it a couple of times. It was really fun to after months of research, fly something I built with my own hands. It did come with its own set of challenges as everything I did was done manually. You can imagine cutting plywood and shaping them into several ribs (the wing profile) with just a saw and sandpaper. It was well worth it anyways. Unfortunately, we don't have open spaces around and where I used previously is not so conducive so my plane is disassembled and chilling off in my wardrobe.

That's great! It always feels good to have a project take off all the work.
Unfortunately, space can be a hindrance. Also, getting accessories can be difficult and costly.
RC planes/drones is quite an expensive hobby.
After I crashed my first model, I ordered a new frame and other parts. I've been waiting for weeks now. The waiting kills the excitement and enthusiasm.

ogocology:


That's great! It always feels good to have a project take off all the work.
Unfortunately, space can be a hindrance. Also, getting accessories can be difficult and costly.
RC planes/drones is quite an expensive hobby.
After I crashed my first model, I ordered a new frame and other parts. I've been waiting for weeks now. The waiting kills the excitement and enthusiasm.

Where did you order from? I usually order from hobbyking or aliexpress. Takes between two to three weeks. The hobby is quite expensive. Recall having to spend over $80 just to ship my package because it contained a pair of batteries- it was via FedEx and got it in a week. The hobby is quite exciting.

brendan007:

Where did you order from? I usually order from hobbyking or aliexpress.

I buy from both sites too. High tech pieces like Tx/Rx and flight controllers from HK and others like props, servo leads and motors from aliexpress. Frames too..
Usually takes 3 weeks or 4 at most but has been taking much longer since after the Chinese new year.
It very difficult to get batteries now due to new regulations on transporting lipos. I ordered 3 PCs from a store in the US and shipping is free.
I have one 450-sized quad now.
Nothing beats the fun, bro. I thoroughly enjoyed the weekend!

ogocology:


I buy from both sites too. High tech pieces like Tx/Rx and flight controllers from HK and others like props, servo leads and motors from aliexpress. Frames too..
Usually takes 3 weeks or 4 at most but has been taking much longer since after the Chinese new year.
It very difficult to get batteries now due to new regulations on transporting lipos. I ordered 3 PCs from a store in the US and shipping is free.
I have one 450-sized quad now.
Nothing beats the fun, bro. I thoroughly enjoyed the weekend!

I'm considering building either a quadcopter or helicopter but I'd prefer the Helicopter. Not quite certain which of the two will cost more. Anyways, I'll do my research.

i am, i base in designing and circuit, etc

pls I need any transmitter and receiver for the rc car :5v

pls ogocology can you help

Javen:
Pls where can I buy the tx and rx for rc car in lagos

Hi bro buy from www.aliExpress.com online market on china. Or www.hub360.com.ng is nigerian.

I can't find any on hub360 site
pls where do you live
I don't have a mastercard, so can you help

Javen:
I can't find any on hub360 site
pls where do you live
I don't have a mastercard, so can you help

Drop your number. I will call you

brendan007:

I'm considering building either a quadcopter or helicopter but I'd prefer the Helicopter. Not quite certain which of the two will cost more. Anyways, I'll do my research.

A helicopter costs less based on materials needed.
You need only 2 motors and a servo. The design is abit trickier, I think.
I do not plan to take that on right now. Still practicing on improving my quad-flying skills..

ogocology:


A helicopter costs less based on materials needed.
You need only 2 motors and a servo. The design is abit trickier, I think.
I do not plan to take that on right now. Still practicing on improving my quad-flying skills..

I thought quads are not that difficult to fly anyways happy flying. Any idea on the cheapest means of getting lipos In terms of shipping? It kinda costs a fortune getting it from hobbyking.

where do you get the component

brendan007:

I thought quads are not that difficult to fly anyways happy flying. Any idea on the cheapest means of getting lipos In terms of shipping? It kinda costs a fortune getting it from hobbyking.

These things can be tricky, bro. A crash can dent your wallet and dampen enthusiasm. So you gotta learn to fly them right.

I have a supplier that sends batteries from US. Shipping is free.
Let me know what you need and I'll check the cost for you.
I just got 3 new lipos myself

Fash20:
where do you get the component

Mostly bought from China or Singapore.. Sometines, from the US

[quote author=ogocology post=53202153]Sorry, people.
I was actually working on a project and planned posting pictures and steps after I get it to work.
It was a quad copter. (You'll understand why I used past tense later)
I used the following:
4pcs 2212 1000kv brushless motors.
4pcs ESCs
Kk 2.15 flight controller
Turnigy 9x Radio Transmitter and receiver (8Ch)
Zippy 3000mah 3S lipo battery.

After setting up and configuration, I went outdoors to test the quad.

1st trial crashed into a tree. Luckily, no damage was done.
The second time, it gained altitude fast.
And in a twinkle of an eye, it disappeared into the sky.

A 3-hour long search couldn't find it. I'm still searching though.


so sorry about that....

what you should know about buy a radio transmitter is make sure the have perimeter protection sensor....
that will help your drone not to wonder of and get lost