Olayinkaoj:


Thanks for your detailed explanation. However, may I know if yours was done with 60 cm dish? Also, while tilting to my left from the S-E direction, would I need to get to the East direction just like how 28° E and 36° E are facing?

ArewaNG:
Hello Room, Nigcomsat 1r 42.5E dish 60cm, tp 12518 H 25000 is red for 3 weeks. is it general?

abohwun:
12284v 27500 but 12304h 27500 is easy tracking.

Yinka4dad:
thanks bro what size of dish r u using

Yinka4dad:
thanks bro what size of dish r u using

ArewaNG:

Thanks nigcomsat is now working I did attached LNB to multi TV position.

ugoobest1:
pls houz, in nailing mbc26e and 28e in one lnb using 16e as d primary position, Wats d maximum percentage on 16e 10804h30000. my dish shifted due to heavy rain and snc den, lost d signal on Mbc 26e and it's proving difficult to track again...Help Houze

Ismy5000:


If you are attaching 28e to d already installed 16e den you will ur 28e lnb to down a little bit. In other to have joytv and MBC with one lnb. But if 28e is d primary . u will raise your dish up a little bit . to have 26e.
As of DAT 7e , just adjust and tweak your lnb . you will have 7e with 5e together .
And if you want to track 9e. You can go ahead if its trackable in your area . but don't forget to have to auto roll decoder .

abohwun:
60cm a 5 in 1 combination with 16e been the primary lnb.

1kinggy:


Please do you have an idea of much a 5in1 goes for now?

1kinggy:

Please do you have an idea of much a 5in1 goes for now?

Yinka4dad:
have been asking since last wk for any1 help me check maybe mbc on badr is stil working mine is red pls help mi check

ArewaNG:

Thanks nigcomsat is now working I did attached LNB to multi TV position.

Monlo:
@all,rescan ur consat package on multi TV position,a number of their paid channels with $ signs are currently FTA,enjoy why it lasts.

Oguguolouis:
Working

Yinka4dad:
its not working at my end at all is there another way I can

ArewaNG:

Thanks nigcomsat is now working I did attached LNB to multi TV position.

sunene1:
input the TP manually and scan for the channels 12565 H30000.i'm watching them presently on my set up

Oguguolouis:

is it any decoder or only consat? Becos mine is not coming . I use star track decoder

Oguguolouis:

is it any decoder or only consat? Becos mine is not coming . I use star track decoder

Alongeous:

Just try to increase your multi TV signal as much as you can, they would definitely come up

Oguguolouis:

is it any decoder or only consat? Becos mine is not coming . I use star track decoder

Yinka4dad:
the funniest part of it is dt I track multi tv to be 85% and.input 12845/ 30000 on badr n move the dish up bt stil the same.bt I will try the tp u gave me

Alongeous:

Good afternoon bro, the comment you quoted was actually for the guy unable to receive the consat channels alongside that of multiTv. It is obvious you're really missing your MBC channels. I love the channels as well, especially for its picture quality. This is what you should do, after tracking multi TV, standing in front of your dish, move the dish towards your left in such a way that the signal quality reduces, as you can never get MBC while multi TV signal quality is at 85%. Tap your dish up a little such that the elevation bolt falls in between 60 and 65 degree mark, this should further decrease the multi TV signal quality to about 60 to 65 percent. When you're at this range, tighten your elevation bolt a bit, so that it doesn't go down without applying any effort or force. Then input your MBC tp, 12284 V 27500, alter the elevation and azimuth bit by bit, you should hit green.
From your name I assume you reside in SW, so for better result and to enable you nail the MBC alongside Multi TV with little lost of TPs, I recommend you use a 90cm dish.
Also set your lnb at 3 '0 clock while facing your dish.
Finally, since you are not using a Sat finder, ensure you note the position of the elevation bolt anytime you successfully track a new satellite position. It helps a lot and saves you a lot of stress if you were to track the satellite again.

Brian109:

You are suggesting a 90cm Right? And was I using the correct frequency ,and does it matter which decoder I use?