Pharyn:
I need Magnum MS4348PE.
Kindly get in touch.
09099988770

Pharyn:
I need Magnum MS4348PE.
Kindly get in touch.
09099988770

mank1234:
https://m.aliexpress.com/amp/item/32810512997.html
If your question is choosing btw PHCN and inverter output with phcn priority. Use above link.

If however you want to be on solar(or inverter) at specific time, say day time and switch to PHCN after sunset consider attached image for setup.

The link for timer and contactor that can do this is as follows:
https://m.aliexpress.com/s/item/32762997458.html

https://m.aliexpress.com/s/item/32613347337.html

pranil:



I prefer to USE the Single Pole MCB and contractor built in instead of one single contactor. This allows you to force individual loads or circuits to stay on NEPA or inverter if you choose or switch by timer based on your usage .e.g. weekdays keep fridge on Inverter as teh afternoon load is small when kids at school. Weekends Frdidge off but TV on inverter . Added advantage is you just replace the existing MCB no Seprate DB requited or create a DB with Rows of MCB saving space and money


https://www.aliexpress.com/item/MKWCT-25M-Manual-220V-240V-Universal-Home-Household-AC-Contactor-Modular-Modulus-25Amps-2P-2-Two/32671904971.html?

ola28:
MidNite classic charge controller 150v 96A @195k

victron charge controller 150v 85A @ 180k

pls call 09057285582

bodeface:
Hello Team,
Is there anyone / marketer that has got the Schneider Conext system Control Panel (SCP) for XW+/ SW (865-1050-01) for best price before I look outside of the group, kindly revert with your price.

bodeface:
Hello House,
Thanks for your support and answers to my previous questions.
Please is there any issues in using angle iron to construct solar panel support instead of the standard supports, this is a ground mounted system, the angle iron will form slots that holds each of the solar panels, is there any issues in doing this?
Thanks in advance.
@ Kiekie - you are right Quanta battery is not available in the market currently.

efuro:
BUY NIJA PRODUCTS

please I need information on AUXANO SOLAR Products and price

has anyone had experience with their hybrid inverter or mppt CC or their actual pv rating ?

Do they have auxano ba3 too?

do they have extended warranty on their products?

thanks!

mank1234:
Nice. Do you have link for a modular 18mm DIN programmable timer too?

mank1234:
https://m.aliexpress.com/amp/item/32810512997.html
If your question is choosing btw PHCN and inverter output with phcn priority. Use above link.

If however you want to be on solar(or inverter) at specific time, say day time and switch to PHCN after sunset consider attached image for setup.

The link for timer and contactor that can do this is as follows:
https://m.aliexpress.com/s/item/32762997458.html

https://m.aliexpress.com/s/item/32613347337.html

Note: in the image the load can be more than the fridge so long as current drawn is below (contactor rating divide by 1.25)

pranil:



I prefer to USE the Single Pole MCB and contractor built in instead of one single contactor. This allows you to force individual loads or circuits to stay on NEPA or inverter if you choose or switch by timer based on your usage .e.g. weekdays keep fridge on Inverter as teh afternoon load is small when kids at school. Weekends Frdidge off but TV on inverter . Added advantage is you just replace the existing MCB no Seprate DB requited or create a DB with Rows of MCB saving space and money

https://www.aliexpress.com/item/MKWCT-25M-Manual-220V-240V-Universal-Home-Household-AC-Contactor-Modular-Modulus-25Amps-2P-2-Two/32671904971.html?

Barezzi:

Dunno if you got any answers to this, but none to the best of my professional knowledge.
I'm presently constructing one to carry my 24 panels. When i'm done with the upgrades, i'll post pics.

What's your experience so far with the Schneider inverter/accessories?

life707:


I bought and installed their 2kva/24v inverter.
Noiseless unlike other midrange products that the fan turns on & off often.
Performance has been good too

Down side is that the finished work isn't crisps as labels are glued to casing and detaches after a while.
E.g. input voltage label e.t.c

bodeface:
Hello house,
Anyone with experience on Schneider product should help out on this;

Schneider Conext SW4024 Inverter tripping on F49 fault (DC Over Voltage), the battery bank is a set of eight nos of 200AH wired for 24VDC, I have monitored the charging voltage while the inverter is charging not to exceed 26.1VDC and the battery bank voltage sitting pretty at about 24.8VDC, however once the utility power is applied to the inverter after charging for about 2-3 mins will trip on F49 fault.

Has anyone experienced this before? Appreciate all comments

Saipro:


Cycling loads (especially thermostat regulated ones) are really difficult to put an energy estimate figure on because they might consume their max nameplate rating till the thermostat kicks in (whenever that is). Then there's the surge to deal with each time they start up again.

I have a freezer which consumes roughly 360W on startup and 300W a few minutes later. From then on, consumption is highly dependent on how cool the interior is. Somehow, the more items frozen in it, the less energy consumed (seems somewhat logical), right up until the thermostat kicks in.

And manufacturers often list nameplate values for ideal operating conditions - oftentimes a far departure from real world conditions.

efuro:


nice reading ur views. I hope dey improve. thank you for believing in nija. we get there sooner than we think.

let's buy nija panels instead of Indian or chinko or any other.

my next upgrade will revolves round nija (at least 30% local content)

imagine Australia has 1.2m households using solar, Nigeria can do better with local content.

cheers.

efuro:


True talk.

I came across this nameless fridge/freezer
reading 72w only. But I went back there with A/C watt meter & had a reading of 102w wen compressor kicked..

maybe some enthusiast will check model online for nameplate or http://www.google.com.ng/url?q=http://www.sy-beier.com/Product/3980245831.html&sa=U&ved=0ahUKEwiYs_S9z4DUAhWNalAKHUD3CSsQFggLMAA&sig2=W5p8GZW-GZXyWxDouaRGkA&usg=AFQjCNH1qncdoshfOPMXm9iSanf0LCbPrw

bigrovar:

Problem is when it develops a fault and then you are stuck because very few technician knows how to fix those things. Name brand is non tested durability is in question. Besides most convintional fridge are getting more and more efficient as long as you have your system is well sized u will be fine.

DMerciful:
See pic of an installation I did not long ago. Put all ur installation com.
ponents in max two boards and draw ur circuit flow offline and critic it before transferring to d board. There is nothing lovelier than a neat installation, its even a safe way to go

richmon74:


Neat job
Love it
Keep it up

microgiant:
hello GeorgeD1

I have tried to call you several times without success. A colleague just purchased the 100 liters solar water heater after I convinced him it is cheaper in the long run.

We went to his house to do some survey, but I don't have the experience to advice him on the best possible position and installation. My purpose of calling was for you to help link him to the plumber who installed yours to do the installation.

Please help oh, before he feels I gave him a wrong investment advice.

efuro:


nice reading ur views. I hope dey improve. thank you for believing in nija. we get there sooner than we think.

let's buy nija panels instead of Indian or chinko or any other.

my next upgrade will revolves round nija (at least 30% local content)

imagine Australia has 1.2m households using solar, Nigeria can do better with local content.

cheers.

earthrealm:


for real..there is no made in naija panels, the local made in naija inverters arent good,usually modified sine wave, and not pure sine wave..thus inefficient and prone to overcharging and fire outbreaks.
zinox is not exactly made in nigeria, it more like assembled in nigeria, the govt and enviroment isnt helping at all.

i bought a remote controlled ceiling fan not long ago...and i opened the controller to observe. the circuitry is quite simple, and is what a secondary school student should be able to design and mass produce. it also has an inbuilt timer
i have fallen in love with the remote control aspect of the fan that i wish i can change all the manual controls of my fans to remote control. i wudnt mind buying just the remote controll unit 1k or 2k

earthrealm:


for real..there is no made in naija panels, the local made in naija inverters arent good,usually modified sine wave, and not pure sine wave..thus inefficient and prone to overcharging and fire outbreaks.
zinox is not exactly made in nigeria, it more like assembled in nigeria, the govt and enviroment isnt helping at all.

i bought a remote controlled ceiling fan not long ago...and i opened the controller to observe. the circuitry is quite simple, and is what a secondary school student should be able to design and mass produce. it also has an inbuilt timer
i have fallen in love with the remote control aspect of the fan that i wish i can change all the manual controls of my fans to remote control. i wudnt mind buying just the remote controll unit 1k or 2k

nisol:


There are lots of brilliant minds in Nigeria, unfortunately "man must wack" before any other thing else.
If we had our priorities right as a nation, innovators would have enough time to research and produce quality made in Nigeria goods.

efuro:

Oga Nisol

I just discovered the good work you did several months ago

https://www.nairaland.com/1794647/design-build-48v-40a-mppt#24385844

any update on performance of the device?

in case we need to patronize you in the house.

Thanks!