Please, I need someone to explain how to make windows 10 bootable flash. Thank you.

Download Rufus then load your iso file

babajeje123:
Please, I need someone to explain how to make windows 10 bootable flash. Thank you.

follow this link for the solution http://beinformed.com.ng/blog/2018/02/24/how-to-install-an-operating-system-on-your-computer-using-a-removable-flash-drive/

To create a bootable USB flash drive

1.Insert a USB flash drive into a running computer.


2.Open a Command Prompt window as an administrator.


3.Type diskpart.


4.In the new command line window that opens, to determine the USB flash drive number or drive letter, at the command prompt, type list disk, and then click ENTER. The list disk command displays all the disks on the computer. Note the drive number or drive letter of the USB flash drive.


5.At the command prompt, type select disk <X>, where X is the drive number or drive letter of the USB flash drive, and then click ENTER.


6.Type clean, and the click ENTER. This command deletes all data from the USB flash drive.


7.To create a new primary partition on the USB flash drive, type create part pri, and then click ENTER.


8.To select the partition that you just created, type select part 1, and then click ENTER.


9.To format the partition, type format fs=ntfs quick, and then click ENTER.


Important

If your server platform supports Unified Extensible Firmware Interface (UEFI), you should format the USB flash drive as FAT32 rather than as NTFS. To format the partition as FAT32, type format fs=fat32 quick, and then click ENTER.


10.Type active, and then click ENTER.


11.Type exit, and then click ENTER.


12.When you finish preparing your custom image, save it to the root of the USB flash drive.

While creating a recovery drive, the program will copy a lot of files to the USB drive, so you need to prepare a flash drive that has at least 16GB capacity. Before you do, please note that all the data on the USB drive will be deleted in this process.

1. Connect the USB drive to your computer, and then type “recovery drive” into the search box. In the listed results, select “Create a recovery drive”.
2. In the pop-out window, check the option “Back up system files to the recovery drive” and hit “Next”.
3. Then select the USB flash drive you prepared, and click”Next” to continue.
4. On the next screen, click “Create” to begin creating the recovery drive.

You can check the detailed tutorial step by step from here and hope it helps.