pesamchez:
I got this from previous posts. Yes it is very possible to use a C-band LNBF on a 90cm
dish. However, ur signal wud be very low.
At Arabsat 5C, 20 degree East,with a C-band LNBF on a
90cm dish, U will get many channels including Al jazeera
English, JSC Sports, alkass Sports, Dubai Sports, jeem, Qatar
tv, Sudan tv. is it possible. pls advice

rapthugx:


My max TV has stopped showing. The channel is blank. Anything I can do to rectify it?

mbuaba:
max TV is still showing on my tiger ultra plus

Ismy5000:

Amos 16e or joy TV sport is what you can watch

Mfumu:


Share the formula bro

obyback:

Hi irapada, great job you have done, can you do share parameters for 2.4m offset pls, I believe I am not getting the best out of my dish.

mbuaba:
yes on tiger decoders

IRAPADA:
football channels, I tried hotbird and 9e I got over 200 channels on both sat

IRAPADA:
WHAT DOES THEORY SAY?According to the actual measurements on the dish:AB = 270 Cm = distance across dish from top to bottom (HEIGHT)Width = 250CmP = 22 Cm= maximum perpendicular distance from the chord to the dish (or DEPTH).BF = ? = distance of bottom of dish to focal point [i.e., size of LNB arm]AF = ? = distance of top of dish to focal pointAccording to our mathematicsteacher:Focal length (LNB arm) = (Width x Width x Width) / (16 x Depth x Height)In the case of the off-set dish we had:Focal length = (250 x 250 x 250) / (16 x 22 x 270) = 164.4 CmThe offset angle ‘theta’ is calculated as:Angle theta = (1/2) x asin(8P/AB) = 0.5 x asin[(8 x 22) / 270]= 20.68 DegreesAlso:Offset Angle = 20.68 Degrees= asin [(AF - BF) / AB]We need to calculate the distance AF = distance of top of dish to focal point:20.68 Degrees = asin [(AF - BF)/ AB] = asin [(AF – 165)/270Making AF the subject of the formula we got: AF = 260.35CmPUTTING THE MATHEMATICS TO PRACTICAL USE:Now it was time to readjust the dish to reflect the above measurements namely:AF = 260.35 Cm;BF = 165 Cm = Length of LNB armBefore today, we had used: AF= 266Cm; BF = 156.5CmFirst we set loose the existing LNB support arms and LNB arm itself.Next: we adjusted the LNB arm to 165Cm.Next, to adjust the dish to the top length AF=260Cm correctly, we first measured and marked with masking tape, a 260Cm piece of straight Coaxial cable (you may use a rope too). We then tied one end to the top of the dish, and the other end of 260Cm to the tip of the newly-adjusted LNB arm (165Cm).With these two lengths (AF and BF) settled, the correct length of LNB support arms to“suspend” the AF and BF lengths correctly as given above was automatic. And this adjusted to 193.5Cm !This means that although theoretically, mathematics gives us the offset angle to be20.68 Degrees, there is no need to measure this angle onthe dish practically. Just get AF and BF and ensure the LNBarms supporting this are equalin length (193.5Cm)!

Mfumu:


Thanks for the clue. Is it possible to give my cband dish an offset angle so that it can perfom better just like the factory made offset dishes on KU signals?

cabes007:
Gud evening house pls anybody with biss keys for kfs on intelsat 901@ 18 west should pls help me out email cabes4real@gmail.com or what app 07064937553 pls I need it badly

drandonzero:
I own tiger T3000 and it doesnt get those channels

showafrica:


I have it but will need to search through my phone... Are u getting all the kwesse there and which location are you?

abohwun:
Try and increase your signal quality.

IRAPADA:
blue parameters for 1.8m dish,yellow for 1.3m dish, the side arms is 1600mm not 1830mm,all others are correct

IRAPADA:
blue parameters for 1.8m dish,yellow for 1.3m dish, the side arms is 1600mm not 1830mm,all others are correct

showafrica:


I have it but will need to search through my phone... Are u getting all the kwesse there and which location are you?

mbuaba:
no more biss encryption. changed

RasKush:
SUNPLUS 1506G HW_v. 6.704G_4M_02/01/2018 COMPATIBLE CHINESE MAIN-BOARD STBs.
The following STBs' chassis is based on Chipset SunPlus 1506G Chinese mainboard and a single software can be used to up-grade the below three [and similar] satellite receivers. The "HW v.6.704G_4m" build dated 02/01/2018 works best for Africa and it solves the following issues:

1. Added Auto-roll Biss Key.
2. Added Auto-Roll PxxxxVu Algorithm.
3. Added Free IPtv [8 Servers].

The STBs' include PhiliBAO ph5658 PLUS HD, WizTECH 223 PLUS HD, DiGiCOM HD. Download the extracted .bin file from here:
https://drive.google.com/file/d/1jU7tZs3aRnqF7Xz34i-Twt5ccLpataDR/view

nura737:
I think tstv is now in nigcomsat position frq 12590 h 25000.

showafrica:

Are u sure they are no longer biss?

lincolnola:


@ All,
Has anyone comfirmed this TP?........no light at my end

cabes007:


Bro if u hav d biss u can pls shear wit me bro
Cabes4real@gmail.com

flamesbaba:
the PIC is for strongest 9800A pls help me if there is any receiver that use the same stb thanks for your good work

nura737:
I think tstv is now in nigcomsat position frq 12590 h 25000.