HsLBroker:
.

oduncojamaica:
Pls my Oga I Just roof My building Last 4 month, but ï discover that some of the woods started having holes and producing powder particules,but thé ceiling has not done yet. How and what to use to rescue the situations.

ak22:


Price please And location?

HsLBroker:
email lifelightproperties@gmail.com or call 08182481552 thanks

ak22:


Ok

HsLBroker:
A home is gotten when you look for comfort based on your fantasy, but a shelter is a necessity, and a building becomes a shelter when it can prevent rain,water,sun, strong wind and other climatic elements from affecting the occupants- human,animal, living and dead loads with personal effects.

As far as I am concerned the moment you have your roof placed on a building, other things are important but they are basically needs. You can’t move into a house without a roof , but we have seen people living in a house with no window or makeshifts windows covered with ordinary bags and cardboards.

So it is very important to calculate the dimension of the true length of a roof members. These dimensions are essential to determine the accurate span of Rafter, Wall plate, Tie beam, King Post, Overhang, Purlins, fan struts etc.

Residential timber-framing construction clearly differentiate between spacing and span Spacing the centre-to-centre distance between structural members, unless otherwise indicated.

Span the face-to-face distance between points capable of giving full support to structural members or assemblies. In particular, rafter spans are measured as the distance between points of support along the length of the rafter and not as the horizontal projection of this distance.

Single span the span of a member supported at or near both ends with no intermediate supports.

Continuous span the term applied to members supported at or near both ends and at one or more intermediate points such that no span is greater than twice another.

Span/length calculation for roof members.

As can be seen the span of the rafter in the figure below is not quite in agreement with the Code but we will use the figures for the rafter span as calculated below.

Wood/ timber are sawn into various sizes amongst are

2” by 2” i.e 50mm by 50mm

2” by 3” i.e 50mm by 75mm

2” by 4” i.e 50mm by 100mm

2” by 6” i.e 50mm by 150mm

3” by 4” i.e 75mm by 100mm

3” by 6” i.e 75mm by 150mm

Onyexin:
Pls how much should a carpenter charge me for woodwork of roofing a 5 bedroom bungalow ?...need urgent answer

psycoanalyst:
Hi sir,can you assist me with most recent prize/cost of this roofing materials?

Onyexin:
How much is the price of 0.45m thick of metro purple tile aluminum and step tiles respectively?

HsLBroker:
.

HsLBroker:
email lifelightproperties@gmail.com or call 08182481552 thanks

HsLBroker:
email lifelightproperties@gmail.com or call 08182481552 thanks

HsLBroker:
email lifelightproperties@gmail.com or call 08182481552 thanks

HsLBroker:
.

ak22:


Ok

HsLBroker:
email lifelightproperties@gmail.com or call 08182481552 thanks

joycluv:
Plz how many feet high is send- down- the- rain roofs