Babs612000:

I really like your comments which you said YOU THINK.

ak22:
Hello house I need quotation for this swimming pool Size 4m /3m and 4ft shallow to 2 ft ?

akiniyi22@gmail.com

beamNIGERIA:


Where is the site located?

chukwuka12:
Evening House,

Please I would like to know the difference/advantage/disadvantages btw using cement trolley and using tiles....

beamNIGERIA:


Tyrolean and tiles are two different classes of finishes. Tyrolean is best used as external finishing, while tiles can used both external and internal.

Quality Tyrolean can be more expensive(depends on type of tiles) but its more durable requires little maintainance.

Tyrolean rocks any season but tiles is bound to weqr

dammyllare:
Good morning house, I noticed slot of us don't even say the truth anymore because we want a contract.
It is important to be clear with the client from the onset on the possible problems, cost and also explaining the difference in method used

ak22:
Hello house I need quotation for this swimming pool Size 4m /3m and 4ft shallow to 2 ft ?

akiniyi22@gmail.com

ShockMajor:
Good evening guys, please i wanto know, if i have land i want to build on, and i wanto start building, i have artitecural plan already,....is it a building contractor i need to handle the construction, laborers , buulding materials, etc or a site manager. Please help out

YorubaPrince:
Hello House,

Just wondering.... I need to know a rough estimate of how much to budget to floor-tile (regular tiling) a story building of 8 units of 2 bedroom flat.

Spyder88, Mufutau55 Abeg, how much have you guys spent tiling a one story project?

Thanks in advance

boay:


Can anyone reply or only the people you mentioned?

megacontrol:
Hello all,

What is the estimated cost savings per block in molding blocks on site vs purchasing specially made blocks?
For the sake of analysis, lets say we need 20k (twenty thousand) blocks and space is available on site to stack it....

1) What is the best unit cost (and savings) we can achieve if we mold compared to buying from the market at btw N200-N220 per block?

2) What are the materials required and quantities to mold 20,000 pieces of 9" blocks on site?

edit: Machine will be used for the molding due to qty required (over 20k) and to get good quality.

Thanks for your contributions.

Timtol:

The following have access to building construction in Nigeria.
Architect as first man
Structural Engineer as second man
Builder as third man.
The last two duties are Project managing(for project manager) and Quantities Surveying(for Quantity surveyor).
Any of the first 3 can be the contractor as the case may be.

Regardless of the professional in charge,an architect been the designer will always be needful to carry out his duties where necessary,the same goes to a structural engineer in the aspect of iron works where clarifications are needed.
For more into click the link below

rotecch77:


Good, the OP now needs the service of a BUILDER to carry out the construction work.
Bcs OP is with the building drawing already done by the architect/ structural engr.

Rubbiish:

If u are molding with machine like op said, i don't think there is much difference in cost.
@bold i think it is actually the opposite, u buy blocks to avoid delay, molding do take sometime

Olazzeedris:


About the cost truly the difference is not much which have expressed above !

Then about the time if Your project is schedule with PROFESSIONAL METHODOLOGY and having a projects required such amount of block has op said. ON site production With machine is the best!

For best quality
To maintain the time schedule intact!

Nozzle:
Engineers and expects in the house, i have two questions to ask...

I made this water tank scaffold recently. It is 4inch galvanised steel pipe and it is meant to carry two 1500 litres tank.

1.)Those of us in lekki/ibeju lekki who have constructed this type of scaffold. I hope its holding. Any long-term issues...?


2.) How would the foundation be. My Engineer recommended 2ft into the ground and a slab above ground surface. Is that how it is done.

Abeg make una assist me before scaffold go fall o.

Nozzle:
About the tank scaffold..

I went to a building where one was done.. the tank fell off from the top of the scaffold. It was a two storey building somewhere in sangotedo after ajah. The scaffold was quite high.
Luckily the tank fell into a bare land just adjacent the building. So no injury or life lost..

So i am trying to get all the information possible to be sure he is on the right track.

Please guys i need your input.

Happy sunday

segzy14:


You have to pay me my 100k balance if not I will continue posting.
#chekitautisafraud#

AngelicBeing:
Nawao, I thought the issue has been resolved, the guy doesn’t know that he is doing so much harm to his business / brand / name online

boay:


I respect your opinion, but I think I need to add this:

Anybody can be a contractor, I am a Quantity Surveyor and by 2020 I will be launching my construction company. Anybody can go into the business of construction.

In my construction firm, I will have Architect, Engineers etc on my team.

segzy14:



For about three weeks he just paid 80k out of 180k , he is a scammer.

miracle1997:
This is what 6.6 million naira has given me thanks to almighty God.. A 5bedroom bungalow all ensuite with kitchen and waiting room and two sit outs.. Yet to insert internal doors n toilet doors, yet to do plumbing fittings and electrical fittings, pop, tiling, belting.. And aluminium rail on varender..
Note.. Septic tank has been done.. PVC was used to roof 4 rooms, toilets, and passages, pop will be used to do others

boay:


Any drawing? Location?

miracle1997:
This is what 6.6 million naira has given me thanks to almighty God.. A 5bedroom bungalow all ensuite with kitchen and waiting room and two sit outs.. Yet to insert internal doors n toilet doors, yet to do plumbing fittings and electrical fittings, pop, tiling, belting.. And aluminium rail on varender..
Note.. Septic tank has been done.. PVC was used to roof 4 rooms, toilets, and passages, pop will be used to do others