Nice build.. Do get a kitchen scale e.g (one that is calibrated in grams, with precisely 1kg, 2kg, or 3kg but not more than 5kg reading capability)
You should learn to start weighing every single bit of material you add to your heli.

I do not have that with me here but you said patience is the best thing to do,am looking forward for who to help me with

am starting to make a new rc helicopter with my materials at home so it is called homemade rc helicopter.the transmitter and reciever i have is for ps3,can it work with my helicopter also my esc will be made from this circuit below.swashplate is not a hard thing to do but what is most important is my main hiller rotor head thats what seems to be comple.my lipo battery will be found headset,minh mp3 and so on,so am soldering like five together to create a high volt.my tail will be shaft drive.also my servo will made from mini phone vibrator motor with some mini gear and potentiometer what i need now mini mp3 player.very soon i will start explaining and post some pics of it.

Tommyclancy:
My nam is tomiwa am buildin a rc heli al i nid is servo esc gryo tx rx nd swashplate

hey tomiwa see can you help me i wanna build a fixedpitch helicopter,i just want it to lift up thats all,,,,how can i,cuz.It seems you gat the idea

This thread has inspired me... kudos Kingsley.. Hope you achieved what you dreamt of years ago?

HenryDion:
This thread has inspired me... kudos Kingsley.. Hope you achieved what you dreamt of years ago?

Yea it did

Tommyclancy:
I do not have that with me here but you said patience is the best thing to do,am looking forward for who to help me with

please tommyclancy would you help me i stay in lagos,can you tell me where to get gear,high speed motor
my main blade was made from aluminiun soda can
all i cant make is the rotor head

waw thats a nice work, Brother were did u both ur parts, were do u risite?

waw that a nice work, brother were did u both ur parts??

kings i di too much, i love ur work

hi my name is igwevictor, i made this heli , and power it with 24v lead acid battery, need ur help to make it fly @ kingzzz, they always crash and crash.

how my mini homamade heli crash when i power it using 18v.

Vedio.


whatapp me, 09032292949

am from anambra state onitsha.

so here is how i made the rc heli.
Step1: the body is circuit board, drill a hole.
Step2: get a tube add ur bearings.
Step3: add ur brush motor and the tube.
Step4: add ur gears and shaft:
Step5: add landing gears and tail .
Step6: add ur tail motor,
Step7; i use circuit board for the rotor head.
Step8: i made my blade with aluminum and wood,
Step9: i balance the blade both tail and main blade.
Step10: power it with 24v two lead acid battery.
Thank u for helping.

so here is how i made the rc heli.
Step1: the body is circuit board, drill a hole.
Step2: get a tube add ur bearings.
Step3: add ur brush motor and the tube.
Step4: add ur gears and shaft:
Step5: add landing gears and tail .
Step6: add ur tail motor,
Step7; i use circuit board for the rotor head.
Step8: i made my blade with aluminum and wood,
Step9: i balance the blade both tail and main blade.
Step10: power it with 24v two lead acid battery.
Thank u for helping.

Here!?

pleace do waitch the vedio, Run is the name, cause it is dangerous lol, they dont fly they are just crazy, that's why i need ur help @kinzzzzzzzz

Cool

Pakingzzz:
These gyros were also sent. All are AVCS(Angular vector control system)

wooow

thank you veru mych, i like you article
http://www.freewing-model.com

Pakingzzz:
(4) 1 big bearing ball (for the ball joint)

where did u get the ball bearingand mini bearing

HOMEMADE RC HELICOPTER
i will be showing you guys how i scratch built my rc helicopter and the materials i am using are all homemade including my transmitter and receiver and my electrical component.
MAKING THE SWASHPLATE;
The swashplate is a device that controls the helicopter.It consist of the upper part(moveable) and the lower part (stationary) with a ball.
Materails needed
a ball
plastic ballholder
the upper rotating part
a small round metal plate
handle for control linkage

HOW TO ASSEMBLE THE SWASHPLATE
After having the materials u will now put it together.
STEP 1;put the ball in the ballholder.
STEP 2;cover the swash plate with the metal plate.
STEP 3;fix the upper part of the swashplate and add ur handle for control linkage

Can I purchase one of you transmitter and receiver from you am also working on my tc black hawk helicopter my contact benjaminfelix117@gmail.com

Happy new year

pakingzzzzz:
Happy new year

Guy! I'm fuçking proud of you.

I sense you are a graduate now? Right? Even more shocking is that you are not an engineering student.

herzernIsHere:

Guy! I'm fuçking proud of you.

I sense you are a graduate now? Right? Even more shocking is that you are not an engineering student.

Thanks.

Noce thread. Did any of the heli flew?

FarmTech:
Noce thread. Did any of the heli flew?

Yes it did flew. Whatcha the videos on YouTube of the craft flying