Peejaygold09:
Good morning. Yes vehicle has been scanned. Car was bought brand new on hire purchase.
Car has only was hit from behind and it hot another car about 4 years ago
Power steering performs very well. It only becomes stiff when the eps light comes up
Thank you

Lexusgs430:



http://www.autohex.net/dtc-help/hyundai/56/2012/16/C1611/

Xtianvic:
Please what do these lights signify?
Car: Lexus ES300, if that's relevant

Peejaygold09:
Good Evening My Husband has been the person working with the mechanic. The current mechanic scanned it but I don't have information on the codes

The steering is not stiff, no noise from the steering
The EPS light comes on, temperature gauge, rpm and gear signs go off.
The car begins to move very slow.. Also AC goes off.
I will show this feedback to him and get back to you. Thank you

Peejaygold09:
Good morning. Yes vehicle has been scanned. Car was bought brand new on hire purchase.
Car has only was hit from behind and it hot another car about 4 years ago
Power steering performs very well. It only becomes stiff when the eps light comes up
Thank you

Peejaygold09:
Pls what do I do with this. It's just like Greek to me. Please�

AutoMoTech:

pls scan all the modules and provide all the codes stored on each module. thanks

Peejaygold09:
Okay. I will get back to you once I share with my Oga. He is with the car now.

Peejaygold09:
Good morning. Yes vehicle has been scanned. Car was bought brand new on hire purchase.
Car has only was hit from behind and it hot another car about 4 years ago
Power steering performs very well. It only becomes stiff when the eps light comes up
Thank you

radautoworks:


Programming issue. Your esc module needs to be coded and g sensor calibrated. It's a software not a parts issue. Also possible bad fuse or wire short

AutoMoTech:

EPS or ESC?

radautoworks:


Esc from the c1702

Monkeyprick:
Afternoon my Oga's ,I have been hearing gbi gbi sound underneath my car for a month, so i took it to a mechanic and he said one of my engine seat is bad. He removed it and put bushings ,yet the sound still persist.
Fast forward to yesterday, the sound was unbearable, as i opened the door to sit in, i heard something like a crack sound (which i suppose has to be the brake pads)..
Please what could likely cause this?
Wear out shaft /brake pads or linkage?
Also, the car makes so much noise whenever i drive on interlocking stone, could that be a linkage stabilizer?
Please help me out Bosses.

AutoMoTech:

OH YEAH... thats true. but i felt it wouldnt be wise making a conclusion only based on just one module scan result. don't you think it would be wise to see other codes in other modules to give a better diagnosis process?

AutoMoTech:

OH YEAH... thats true. but i felt it wouldnt be wise making a conclusion only based on just one module scan result. don't you think it would be wise to see other codes in other modules to give a better diagnosis process?

AutoMoTech:

OH YEAH... thats true. but i felt it wouldnt be wise making a conclusion only based on just one module scan result. don't you think it would be wise to see other codes in other modules to give a better diagnosis process?

AutoMoTech:

OH YEAH... thats true. but i felt it wouldnt be wise making a conclusion only based on just one module scan result. don't you think it would be wise to see other codes in other modules to give a better diagnosis process?

Peejaygold09:
Also all the modules have been scanned

radautoworks:


It was based on all three codes. The module accompanied with a faulty fuse or short would throw that combination of codes

AutoMoTech:

my money has been more on a CAN fault. haven read this i am more convinced this is most likely a short in wiring or communication fault.
Peejaygold09... just get yourself a very good electrical technician to diagnose this fault.

AutoMoTech:

When you hear dis boiling water noise have you openee the bonnet to check?
Off my head you could possibly have an overheating problem.if the noise is from the radiator or expansion tank, then you sure have an overheating issue.
If so you will need to get your cooling system checked
Possible causes;
Head gasket might be blown
Radiator cover might have failed
You might have a leak somewhere
Etc...

Kindly inspect and revert

suzzyrims:






Hi
Thanks, I took it to a mecho around my house and he told me it is the engine seat that needs to be changed.

funkymeky:
Please where can I get a good auto mechanic for my Lexus ES350 in port Harcourt. I don't mean road side mechanics. A good auto maintenance company that specializes in modern Toyoto and Lexus cars will be very much appreciated. Their location and contact number will be very much appreciated too.

Peejaygold09:
Good afternoon all. All efforts have Ben exhausted. The brainbox of another Kia was put in the engine of the Accent and the EPS went off. Then the brainbox of the accent was put in the Kia and the EPS sing came on instantly in the Kia dashboard.
Verdict : repair brain box or buy another one.
Brainbox had been worked on last year.

Please I need your assistance:

Should I repeair brainbox again (referral needed)
Should I just buy another one (referral needed too)

AutoMoTech:

the check is the CHECK ENGINE LIGHT aka CEL. your engine computer turns that on when there is a fault detected and an error code is stored on the computer.
i will get back to you later on the other light. i currently do not have information on it

Xtianvic:
thanks a lot

AutoMoTech:


So U mean your engine seat thats bad is the one sounding like boiling water?