Welcome, Guest: Register On Nairaland / LOGIN! / Trending / Recent / New
Stats: 3,171,247 members, 7,880,921 topics. Date: Friday, 05 July 2024 at 09:18 AM

ASK GAZZUZZ - Autos (290) - Nairaland

Nairaland Forum / Nairaland / General / Autos / ASK GAZZUZZ (627430 Views)

Gazzuzz Autos And Part Store. / When GAZZUZZ takes over - RX350 - The Journey / Gazzuzz Inspected Vehicles (lagos) (2) (3) (4)

(1) (2) (3) ... (287) (288) (289) (290) (291) (292) (293) ... (408) (Reply) (Go Down)

Re: ASK GAZZUZZ by NanaF: 8:31pm On Feb 16, 2020
Hi Gazzuzz. Please what does it mean when a car’s Carfax history stops at Feb 2017, no record of auction or sale or theft and it was recently imported into Nigeria. It’s Canadian used. Is this normal?
Re: ASK GAZZUZZ by GAZZUZZ(m): 8:46pm On Feb 16, 2020
NanaF:
Hi Gazzuzz. Please what does it mean when a car’s Carfax history stops at Feb 2017, no record of auction or sale or theft and it was recently imported into Nigeria. It’s Canadian used. Is this normal?

cc carguide
Re: ASK GAZZUZZ by inception101(m): 9:48pm On Feb 16, 2020
inception101:
Oga Gazzuzz. Pls what's the way forward and how much would it cost me... pls help me before I get ripped further

Oga gazzuzz, help me oo
Re: ASK GAZZUZZ by remogen(m): 11:54pm On Feb 16, 2020
Good evening bro, my 2003 Toyota Camry is smoking and I want to change the engine, please I want to know the difference between borale and full engine? how much?
Re: ASK GAZZUZZ by GAZZUZZ(m): 1:01am On Feb 17, 2020
inception101:
Oga Gazzuzz. Pls what's the way forward and how much would it cost me... pls help me before I get ripped further

Lexus es350 the transmission ECU seems to have a harness connector not locked in place .

The input turbine speed sensor is within the gear box unlike other builds. Start by locking up the harness properly and clearing codes.


Re: ASK GAZZUZZ by BamBamK: 12:02pm On Feb 17, 2020
i'm lost sir.

kindly explain further.

GAZZUZZ:


Nigerian used = south Africa . Therein lies the problem sad
Re: ASK GAZZUZZ by DaSugarBoi(m): 5:05pm On Feb 17, 2020
Hi boss . Please which ATF can i use for 2003 Toyota Camry and which affordable engine oil will you recommend?
Car is on 150k mileage already.
Re: ASK GAZZUZZ by MrFinbarr(m): 5:59pm On Feb 17, 2020
GAZZUZZ:


Lexus es350 the transmission ECU seems to have a harness connector not locked in place .

The input turbine speed sensor is within the gear box unlike other builds. Start by locking up the harness properly and clearing codes.



Sir Gazzuz, good evening.

I have a car that trips off while driving especially during the hot weather. It usually refuses to start until after 30mins - 1hr when the car must have cooled down. This doesn't happen in the morning or cool evening.

Car is 2008 Toyota Hilander... V6

Please Help!!!
Re: ASK GAZZUZZ by Mrford(m): 6:00pm On Feb 18, 2020
MrFinbarr:


Sir Gazzuz, good evening.

I have a car that trips off while driving especially during the hot weather. It usually refuses to start until after 30mins - 1hr when the car must have cooled down. This doesn't happen in the morning or cool evening.

Car is 2008 Toyota Hilander... V6

Please Help!!!


Check your fuel pump.
Re: ASK GAZZUZZ by Graphene(m): 11:39am On Feb 19, 2020
Hi Gazzuzz,
Car: Camry 2008
Mileage: 190000miles.
Concern: 1. Rattling sound when accelerator pedal is engaged while driving. however sound is not heard during idle.
2. Oil consumption.
3. P0128- Thermostat needs replacement.
4. Evap leak test (mode8) fail. Though no DTC on this yet.
kindly elp.
Re: ASK GAZZUZZ by internetparrot: 3:19pm On Feb 19, 2020
Good afternoon Gazzuzz,

Please I have owned a 2005 Honda Accord [not v6] for about 2 months now, bought Nigeria used, car drives perfectly, but I need help on these factors
1. The fans were connected directly, and I need them back to the normal way.
2. I don't seem to like the sound of the car, it could be a bit quieter, there is this uneven sound in the serpentine belt area.
3. The check engine light is on, I'm not surprised since the fans are connected directly.

I am a 8-5 person and won't want to wake up one day and have the car die on me on 3rd mainland grin grin

Please advise, I don't mind bringing it in at your workshop for a comprehensive treatment grin grin
Re: ASK GAZZUZZ by mbahjohnpaul: 8:18am On Feb 20, 2020
Greetings chief Gazzuzz. What's ur advice on Honda pilot 2007 model. I want to get the car cos my road is bad. Pls will u recommend the car ? I need a blunt review. Thanks for the free consult
Re: ASK GAZZUZZ by GAZZUZZ(m): 8:21am On Feb 20, 2020
mbahjohnpaul:
Greetings chief Gazzuzz. What's ur advice on Honda pilot 2007 model. I want to get the car cos my road is bad . Pls will u recommend the car ? I need a blunt review. Thanks for the free consult

You are better off with an axle at the back. Look at the 4runners
Re: ASK GAZZUZZ by mbahjohnpaul: 8:26am On Feb 20, 2020
Wow..thanks for the speedy response. My budget wont carry 4runner, is this pilot a troublesome car? Should i completely avoid it and manage a sedan?
Re: ASK GAZZUZZ by Manuel91(m): 9:10am On Feb 20, 2020
Good morning sir Gazzuzz...

Please I need your advice,

I took my Camry 04LE to mechanic for a top gasket change.
Fast forward to when he starts ripping everything off to remove the top gasket, 2bolts out of 6 or so refused to screw out (this is the 4th day please help).

He suggested a welder could do some magic, bros till now nothing o.


Sir please what else can we do, the car is stuck cos he has loosed everything. I have spent cash conveying welding machine and generator up and down

Re: ASK GAZZUZZ by GAZZUZZ(m): 9:20am On Feb 20, 2020
Manuel91:
Good morning sir Gazzuzz...

Please I need your advice,

I took my Camry 04LE to mechanic for a top gasket change.
Fast forward to when he starts ripping everything off to remove the top gasket, 2bolts out of 6 or so refused to screw out (this is the 4th day please help).

He suggested a welder could do some magic, bros till now nothing o.


Sir please what else can we do, the car is stuck cos he has loosed everything. I have spent cash conveying welding machine and generator up and down

blunt tools.

Yes welding is presently the only way out. Sorry for your troubles .


Modified.

Looking at the picture , i think you should warm up because you will have to replace the cylinder head. There is no way the welding rod and the metal piece being installed will fit .

1 Like

Re: ASK GAZZUZZ by KINGreignn: 9:25am On Feb 20, 2020
Manuel91:
Good morning sir Gazzuzz...

Please I need your advice,

I took my Camry 04LE to mechanic for a top gasket change.
Fast forward to when he starts ripping everything off to remove the top gasket, 2bolts out of 6 or so refused to screw out (this is the 4th day please help).

He suggested a welder could do some magic, bros till now nothing o.


Sir please what else can we do, the car is stuck cos he has loosed everything. I have spent cash conveying welding machine and generator up and down

Chai! see heavy sludge.

Oga you dey use amasco oyel?
Re: ASK GAZZUZZ by greatstephenho(m): 10:08am On Feb 20, 2020
kelvine:
No car issues, I just want to sit here to listen to others.
Meanwhile, what I can do to get a Range Rover Sport ?
just bring 250k
Re: ASK GAZZUZZ by Ty207: 10:35am On Feb 20, 2020
Good Morning Oga Gazzaz
My car RPM is getting low at idle and it make my car to vibrate corolla 2003 even without ac no...once am in traffic it start to vibrate
i just change the fuel pump and i service the nozzle yesterday, no difference
pls help i always put the gear on neutral in other to stop the vibration and the rpm will come up abit
on drive rpm 400
on neutral rpm 700/800
but everything work fine when am not in traffic
Re: ASK GAZZUZZ by GAZZUZZ(m): 11:23am On Feb 20, 2020
Ty207:
Good Morning Oga Gazzaz
My car RPM is getting low at idle and it make my car to vibrate corolla 2003 even without ac no...once am in traffic it start to vibrate
i just change the fuel pump and i service the nozzle yesterday, no difference
pls help i always put the gear on neutral in other to stop the vibration and the rpm will come up abit
on drive rpm 400
on neutral rpm 700/800
but everything work fine when am not in traffic

watch this video.



https://www.youtube.com/watch?v=pnrAMZlkSSA

Re: ASK GAZZUZZ by Manuel91(m): 11:24am On Feb 20, 2020
GAZZUZZ:


blunt tools.

Yes welding is presently the only way out. Sorry for your troubles .


Modified.

Looking at the picture , i think you should warm up because you will have to replace the cylinder head. There is no way the welding rod and the metal piece being installed will fit .


I don enter am... So in other words I need to look for a skilled welder to remove the screw, plus prepare to change cylinder head? God have mercy!!
Re: ASK GAZZUZZ by Manuel91(m): 11:30am On Feb 20, 2020
KINGreignn:


Chai! see heavy sludge.

Oga you dey use amasco oyel?



Lmao!!

Chief na over heating cause am... I use mobil.

I think it's the temperature that caused the screw to get stucked ��‍♂️
Re: ASK GAZZUZZ by KINGreignn: 11:47am On Feb 20, 2020
Manuel91:




Lmao!!

Chief na over heating cause am... I use mobil.

I think it's the temperature that caused the screw to get stucked ��‍♂️

Not talking about temperature that caused damages im talking about that blackish thick putty tar stuff in the engine bay.
Re: ASK GAZZUZZ by Manuel91(m): 12:15pm On Feb 20, 2020
KINGreignn:


Not talking about temperature that caused damages im talking about that blackish thick putty tar stuff in the engine bay.



I am also talking about the blackish thick putty tar stuff, mtcheeew... (I don't have time for this biko).

Which naija oil doesn't cause sludge after a while?

Especially when you have to be careful on the viscosity one feeds an old engine... Sludge is the least of my problem now Oga.. (I asked Oga gazzuzz a simple question and you are trying to be a comedian) #shift

5 Likes

Re: ASK GAZZUZZ by KINGreignn: 12:33pm On Feb 20, 2020
Manuel91:




I am also talking about the blackish thick putty tar stuff, mtcheeew... (I don't have time for this biko).

Which naija oil doesn't cause sludge after a while?

Especially when you have to be careful on the viscosity one feeds an old engine... Sludge is the least of my problem now Oga.. (I asked Oga gazzuzz a simple question and you are trying to be a comedian) #shift

No need to go caustic when you're being corrected NO, Not everybody have sludge on their car's engines. Also quit making excuses for your poor maintenance culture. Well, it's your car,
you money, your time do whatsoever you desire to do with it whatever rocks your boat.

Cheers!

2 Likes

Re: ASK GAZZUZZ by Manuel91(m): 12:44pm On Feb 20, 2020
KINGreignn:


No need to go caustic when you're being corrected NO, Not everybody have sludge on their car's engines. Also quit making excuses for your poor maintenance culture. Well, it's your car,
you money, your time do whatsoever you desire to do with it whatever rocks your boat.

Cheers!


Na wa o... Not everyone has sludges in their car engine; true!! (but Oga did you see where I mentioned the engine mileage is high?). Or do you know any without sludges after a while?

Question I asked, you did not help with any answer.
Your own na sludge or no sludge matter, and you claim you are correcting me... SMH
Re: ASK GAZZUZZ by KINGreignn: 12:49pm On Feb 20, 2020
Manuel91:



Na wa o... Not everyone has sludges in their car engine; true!! (but Oga did you see where I mentioned the engine mileage is high?). Or do you know any without sludges after a while?

Question I asked, you did not help with any answer.
Your own na sludge or no sludge matter, and you claim you are correcting me... SMH

Stop making any excuses for your poor maintenance culture. High mileage or not, sludge appears in cars with delayed oil changes, use of poor quality oil. Fact.


I've opened up engines with 380,000miles and they're as clean as whistle. Fact. Heck, one engine at 260,000 had it's silver aluminium still shiny. What did I opened it for? To change oil seals.

You are also careless to cause your engine to over heat. Fact.

The last time I checked, Nairaland never put any restrictions or similar laws restricting my posting on this thread, the thread doesn't belong to you.
To shun me from commenting, get a gun and pull the trigger.
Re: ASK GAZZUZZ by Manuel91(m): 12:52pm On Feb 20, 2020
KINGreignn:


Stop making any excuses for your poor maintenance culture. High mileage or not, sludge appears in cars with delayed oil changes, use of poor quality oil. Fact.


I've opened up engines with 380,000miles and they're as clean as whistle. Fact. Heck, one engine at 260,000 had it's silver aluminium still shiny. What did I opened it for? To change oil seals.

You are also careless to cause your engine to over heat. Fact.

The last time I checked, Nairaland never put any restrictions or similar laws restricting my posting on this thread, the thread doesn't belong to you.
To shun me from commenting, get a gun and pull the trigger.



Okay sir...

3 Likes

Re: ASK GAZZUZZ by mbahjohnpaul: 1:03pm On Feb 20, 2020
mbahjohnpaul:
Wow..thanks for the speedy response. My budget wont carry 4runner, is this pilot a troublesome car? Should i completely avoid it and manage a sedan?
oga abeg no forget this o.
Re: ASK GAZZUZZ by Ty207: 4:03pm On Feb 20, 2020
G
Re: ASK GAZZUZZ by GAZZUZZ(m): 5:23pm On Feb 20, 2020
Ty207:
Good Morning Oga Gazzaz
My car RPM is getting low at idle and it make my car to vibrate corolla 2003 even without ac no...once am in traffic it start to vibrate
i just change the fuel pump and i service the nozzle yesterday, no difference
pls help i always put the gear on neutral in other to stop the vibration and the rpm will come up abit
on drive rpm 400
on neutral rpm 700/800
but everything work fine when am not in traffic

I cannot help remotely.
Re: ASK GAZZUZZ by gfullmoon(m): 6:52pm On Feb 20, 2020
Ty207:
Good Morning Oga Gazzaz
My car RPM is getting low at idle and it make my car to vibrate corolla 2003 even without ac no...once am in traffic it start to vibrate
i just change the fuel pump and i service the nozzle yesterday, no difference
pls help i always put the gear on neutral in other to stop the vibration and the rpm will come up abit
on drive rpm 400
on neutral rpm 700/800
but everything work fine when am not in traffic

Change Camshaft Position Sensor and thank me later. Talking from experience. You can agree with the seller to return it back if is not the the problem. I ran almost mad for a month plus before getting the solution. Try it.

(1) (2) (3) ... (287) (288) (289) (290) (291) (292) (293) ... (408) (Reply)

Free Honda Radio Unlock Codes. Up To Year 2009. K.k Business Asoc. Ltd / Total Cost Of Clearing A Vehicle In Nigeria / N1,200,000 or Less Tokunbo Cars

(Go Up)

Sections: politics (1) business autos (1) jobs (1) career education (1) romance computers phones travel sports fashion health
religion celebs tv-movies music-radio literature webmasters programming techmarket

Links: (1) (2) (3) (4) (5) (6) (7) (8) (9) (10)

Nairaland - Copyright © 2005 - 2024 Oluwaseun Osewa. All rights reserved. See How To Advertise. 77
Disclaimer: Every Nairaland member is solely responsible for anything that he/she posts or uploads on Nairaland.