rhothymie:
following

/* 
 * Ultrasonic Sensor HC-SR04 code
 *
    Ultrasonic sensor Pins:
        VCC: +5VDC
        Trig : Trigger (INPUT) - Pin 7
        Echo: Echo (OUTPUT) - Pin 8
        GND: GND
 */
 
int trigPin = 7;    // Trigger
int echoPin = 8;    // Echo
long duration, cm, inches;
 
void setup() {
  //Serial Port begin
  Serial.begin (9600);
  //Define inputs and outputs
  pinMode(trigPin, OUTPUT);
  pinMode(echoPin, INPUT);
}
 
void loop() {
  // The sensor is triggered by a HIGH pulse of 10 or more microseconds.
  // Give a short LOW pulse beforehand to ensure a clean HIGH pulse:
  digitalWrite(trigPin, LOW);
  delayMicroseconds(5);
  digitalWrite(trigPin, HIGH);
  delayMicroseconds(10);
  digitalWrite(trigPin, LOW);
 
  // Read the signal from the sensor: a HIGH pulse whose
  // duration is the time (in microseconds) from the sending
  // of the ping to the reception of its echo off of an object.
  pinMode(echoPin, INPUT);
  duration = pulseIn(echoPin, HIGH);
 
  // Convert the time into a distance
  cm = (duration/2) / 29.1;     // Divide by 29.1 or multiply by 0.0343
  inches = (duration/2) / 74;   // Divide by 74 or multiply by 0.0135
  
  Serial.print(inches);
  Serial.print("in, ";
  Serial.print(cm);
  Serial.print("cm";
  Serial.println();
  
  delay(250);
}

EngrBouss:
Do one with omron d6t interfacing with processing software

brisstone:
Please who have an idea where I can learn Arduino programming in Ilorin, Kwara state.?

princejude:

Contact us we can help you...

princejude:
Code

/* 
 * Ultrasonic Sensor HC-SR04 code
 *
    Ultrasonic sensor Pins:
        VCC: +5VDC
        Trig : Trigger (INPUT) - Pin 7
        Echo: Echo (OUTPUT) - Pin 8
        GND: GND
 */
 
int trigPin = 7;    // Trigger
int echoPin = 8;    // Echo
long duration, cm, inches;
 
void setup() {
  //Serial Port begin
  Serial.begin (9600);
  //Define inputs and outputs
  pinMode(trigPin, OUTPUT);
  pinMode(echoPin, INPUT);
}
 
void loop() {
  // The sensor is triggered by a HIGH pulse of 10 or more microseconds.
  // Give a short LOW pulse beforehand to ensure a clean HIGH pulse:
  digitalWrite(trigPin, LOW);
  delayMicroseconds(5);
  digitalWrite(trigPin, HIGH);
  delayMicroseconds(10);
  digitalWrite(trigPin, LOW);
 
  // Read the signal from the sensor: a HIGH pulse whose
  // duration is the time (in microseconds) from the sending
  // of the ping to the reception of its echo off of an object.
  pinMode(echoPin, INPUT);
  duration = pulseIn(echoPin, HIGH);
 
  // Convert the time into a distance
  cm = (duration/2) / 29.1;     // Divide by 29.1 or multiply by 0.0343
  inches = (duration/2) / 74;   // Divide by 74 or multiply by 0.0135
  
  Serial.print(inches);
  Seri
al.print("in, ";
  Serial.print(cm);
  Serial.print("cm";
  Serial.println();
  
  delay(250);
}

princefemo01:




please I need your help on a particular code that has ultrasonic sensor features in it but its not working to to expected performance.....please can I get your whatsapp number?

Kokaine:
Where? Your number

princejude:

Which of the course are you interested in?

Kokaine:

I will need your guidance on this question.
I started a hone automation project where an app controls an led using arduino on Proteus using a Bluetooth module. I followed a YouTube video to copy the arduino code and connect the diagram. I used MIT app inventor to make the app. But the app is not connecting to my device. I get an error message 507 not connected. Is device on?

I want you to assist me with a course that will help me design other circuits as well as complete this one. So what should I do next. I am ready to buy the videos you send me because I am in kano state. Tell me what I need to learn, some projects I could design after the course, the cost and when you are ready to deliver.
I contacted someone on this but he is using covid saga to delay me. I want to use this period to do a project if possible