davodyguy:

Hi.

drop your email for me to send you the dimension for windows for you to give quote.

If it is reasonable, we can deal

davodyguy:

Hi.

drop your email for me to send you the dimension for windows for you to give quote.

If it is reasonable, we can deal

Adedward:
ariseandshine31@gmail.com

davodyguy:


Mail sent

I hope we can deal, if we agree on price

The street is not smiling during COVID-19

davodyguy:
Roof guys in the house.

Please drop your mail to receive drawings for quote.

We are at roofing stage now, after roofing, we door doors and windows

mssiah:
Is this better

michlins:
we don't do roofing but for doors and window protectors, you can count on us. 07032fourfour6904

saydfact:


Hi....
this is a ROUGH ESTIMATE using approximate values and a ground beam height of 1200mm (MINUS COMPULSORY FILLING to the footing in and out)

3.5 MILLION (send pics of the site, tag me) note: filling could be a added million.

Goodluck;

(i-say-d-fact)

davodyguy:


Mail sent

I hope we can deal, if we agree on price

The street is not smiling during COVID-19

Osagiesamuel02:
Good morning house, So a friend got this quote for the woodwork of the roofing of his project. He just recently discovered that his engineer has been steadily ripping him off by quoting excess materials up to this stage. I felt I should bring this here for proper vetting. Is the material and pricing fair enough. The king post if 14ft high. Thanks

DTorreto:
Good morning all,

Please electrical engineers in the house help me consider and analyze this list of materials for wiring a 4_bedroom bungalow. My instinct is telling me there are rip-offs embedded in it.

Please prove me wrong, thanks.

davodyguy:


Average cost of 3ft and 4ft doors from you would be in what range?

Got about 10 openings

topsy23:


Also, the rate provided is not among these: COLEMAN, NIGERCHIN and KABELMETAL. Price of cables prsently is more than that. Some of the rate are low compare to recent increase.

twinskenny:
do you have a drawing? Those quantities are much

raymondFirstborn:


N3.5m won't finish that foundation.
What parameters did you use.

5bedroom duplex On a Waterlogged land .?

Filling of the land let's say 500sqm . With the use of a payloader and compactor.would cost at least 1m.

Filling of the foundation too@1200mm high.-11 trips of 30tonnes sharp sand.

BUDGET should be N5 - 6m.

saydfact:



Sir,
Rather than strike out my opinion (next time) share yours and let the OP decide which to take.

1. Building Length approx 20m, width approx 10m = volume of floor = 30m3 @ 40k / m3 = 1.2m (labour and material inclusive, rebar measured separately.

2. Approx length of ground beam = 100m, height 1.2m and thickness = 0.225mm = 27m3 = 1.08m (ditto)

3. Approx tonnage of rebar = 3.5T @ 200k = 700k + labour @ 25k per tonne = 90k = TOTAL 790K

4. Carpenter labour = 120k approx

5. lets allow 150 planks of 1by12 and a few 2x2 = 240k

ADD ALL = N3,430,000:00K

I also added that allow 1m for filling

TOTAL = 4.4Million

whatever his miscellaneous is wasn't my concern....

NOW, I'LL ASK YOU THE SAME QUESTION YOU ASKED ME:

What parameters did you use. TO GET 6M...

CC: mssiah:

i-say-d-fact
(OP only gets more accurate result if he shares his Structural drawings for height of ground beam and Rebars used)

saydfact:


Hi....
this is a ROUGH ESTIMATE using approximate values and a ground beam height of 1200mm (MINUS COMPULSORY FILLING to the footing in and out)

3.5 MILLION (send pics of the site, tag me) note: filling could be a added million.

Goodluck;

(i-say-d-fact)

DTorreto:
Good morning all,

Please electrical engineers in the house help me consider and analyze this list of materials for wiring a 4_bedroom bungalow. My instinct is telling me there are rip-offs embedded in it.

Please prove me wrong, thanks.

mufutau55:


My brother we will always be friends o.
I just dey pull your keg ni o.
We shall not fall to any form of COVID by the grace of Almighty. Nice to see you back.

Hajji M.

saydfact:



Sir,
Rather than strike out my opinion (next time) share yours and let the OP decide which to take.

1. Building Length approx 20m, width approx 10m = volume of floor = 30m3 @ 40k / m3 = 1.2m (labour and material inclusive, rebar measured separately.

2. Approx length of ground beam = 100m, height 1.2m and thickness = 0.225mm = 27m3 = 1.08m (ditto)

3. Approx tonnage of rebar = 3.5T @ 200k = 700k + labour @ 25k per tonne = 90k = TOTAL 790K

4. Carpenter labour = 120k approx

5. lets allow 150 planks of 1by12 and a few 2x2 = 240k

ADD ALL = N3,430,000:00K

I also added that allow 1m for filling

TOTAL = 4.4Million

whatever his miscellaneous is wasn't my concern....

NOW, I'LL ASK YOU THE SAME QUESTION YOU ASKED ME:

What parameters did you use. TO GET 6M...

CC: mssiah:

i-say-d-fact
(OP only gets more accurate result if he shares his Structural drawings for height of ground beam and Rebars used)

saydfact:



Sir,
Rather than strike out my opinion (next time) share yours and let the OP decide which to take.

1. Building Length approx 20m, width approx 10m = volume of floor = 30m3 @ 40k / m3 = 1.2m (labour and material inclusive, rebar measured separately.

2. Approx length of ground beam = 100m, height 1.2m and thickness = 0.225mm = 27m3 = 1.08m (ditto)

3. Approx tonnage of rebar = 3.5T @ 200k = 700k + labour @ 25k per tonne = 90k = TOTAL 790K

4. Carpenter labour = 120k approx

5. lets allow 150 planks of 1by12 and a few 2x2 = 240k

ADD ALL = N3,430,000:00K

I also added that allow 1m for filling

TOTAL = 4.4Million

whatever his miscellaneous is wasn't my concern....

NOW, I'LL ASK YOU THE SAME QUESTION YOU ASKED ME:

What parameters did you use. TO GET 6M...

CC: mssiah:

i-say-d-fact
(OP only gets more accurate result if he shares his Structural drawings for height of ground beam and Rebars used)

CEOAyoStones:
My name is Ayobami. i am into granite stones business
here at Blackstone Construction company.
we supply any sizes of granite stones. NO UP FRONT PAYMENT NO PROBLEM,

1. 3/4==N2900 per ton

2. 3/8==N2900 per ton

3.1/2==N2900 per ton

4.Hard Core== N2900 per ton

5.Stone Dust==N1700
6.Stone Base==N2600

We charge by distance for truck.. we have 30tons truck, 20tons truck and 10tons. we receive payment on delivery..
do not hesitate to contact us for more information through twitter @stillayobami ..Tel:08079121097-08136794205.Thanks

DTorreto:
Good morning all,

Please electrical engineers in the house help me consider and analyze this list of materials for wiring a 4_bedroom bungalow. My instinct is telling me there are rip-offs embedded in it.

Please prove me wrong, thanks.

michlins:
the 3ft doors cost 20k_25k. The 4ft doors cost about 30_35k

EgunMogaji2:
Greeting.

Looking for two things in Ibadan.

1) Someone with a small skip loader to grade some plots.

2) Someone that makes PVC windows.

Thanks.

davodyguy:

Great.

Hope it's the strong one. The local 'bullet' proof iron door, with double layers

What beautiful designs do you have?

You can share with me

Adedward:
ariseandshine31@gmail.com

michlins:
lols. I don't make bullet proof doors oh. At least not with the price range I gave you. To make bullet proof doors, you need at least 6mm pan. How many walls will be able to hold such weight.

But yes, I do make beautiful doors which are also strong and durable. I won't be able to upload pictures here cause many are more than 5mb in size. If you can WhatsApp me on the contact I dropped earlier, I can send you more pictures

davodyguy:


But at least thicker in Layers than those Chinese doors.

Really, why do we need bullet proof doors when I don't do drugs or 419?

God is our shield.

Would respond to your mail

armyofone:
Bro, hope Ibadan is treaing you well. I have questions for you please -

davodyguy:

Chief, I responded to your mail.

Kindly check the dimensions well.

I hope to encourage one or two people on Nairaland.

The man that did my soil test in December, came recommended from Nairaland.

The man that did the BOQ is right here in Nairaland.