rotecch77:


Good of you BABA

What I usually do now is that ones i known that your building is a commercial structure with above 8 toilets I will introduced larger diameter pipe like 6” thick pipe with solid block chamber. with this you can’t experience blockage. The 1st one I deed was about 8yrs ago, block of 6 flats till today no opening of chamber for once.

I don’t even know why we’re talking about it really

Larry1960:

O

Bros it's normal house ooooo . I've done the piping and boxing just wiring now. I'm not using Coleman or cable metal.
No water heater. No plan on inverter or solar panel

What of AC

Larry1960:

O

Bros it's normal house ooooo . I've done the piping and boxing just wiring now. I'm not using Coleman or cable metal.
No water heater. No plan on inverter or solar panel

You said you are not using Coleman or Kabelmetal, what brands of cable so you intend to use.. attend to the question posted earlier

Oga, I am with you in this matter. Whatever you did, i will do �.
I just hate those ugly block and slab chambers. Many moisture problems in abuja houses are on walls adjacent to those ugly chambers.
Even the blockage people talk about occur at those chambers where there is no smooth transition from incoming pipes to outgoing pipe.

EgunMogaji2:


And when one wants to dine with the devil one uses a long spoon.

1) One shouldn’t be having blockages in a well designed system.

2) If I do have a blockage and with two opposable thumbs then I’ll remove the blockage.

I recognize your opinion but my system works for me.

Cheers.

Ordinary common tool called a snake. I have the larger one and the smaller one is available at Shoprite.

Once again, I’m just sharing what I do. It’s not a bible and doesn’t need to be followed.

raymondFirstborn:


Is your land dry or waterlogged

The land is waterlogged as are most land in ajah axis

izehieddie:


The land is waterlogged as are most land in ajah axis

Ok send your plan to Me on WhatsApp
09056082348(call & WhatsApp)
raymondfubara@gmail.com

topsy23:


You said you are not using Coleman or Kabelmetal, what brands of cable so you intend to use.. attend to the question posted earlier

Something like comstar or Nigerchin. I'm not putting Ac

Call for your building 3D design and Building plan at 09081037402 ....

WE BUY DEAD/SCRAP BATTERIES!!!

We also buy off scrap/dead deep cycle batteries from any state to Lagos(T&C applies) .

12v 200a ..... N15,000
12v 150a.......N11,000
12v 100a.......N7,500
2v 500a.......N5,500

If outside Lagos state , send the scrap batteries to your nearby Lagos park & get your payment alert immediately after confirmatory remarks from me with the transport company manager / secretary or driver .

Contact,
Smartcell global services
CALL:: 081-350-31951
WHATSAPP::: https:///2348170385620

I really happy found this website eventually. Really informative and inoperative! Thanks for the post and effort! Please keep sharing more such article.
If You have more Info https://medium.com/@earnfreerobux/

coldcandy:
Oga, I am with you in this matter. Whatever you did, i will do �.
I just hate those ugly block and slab chambers. Many moisture problems in abuja houses are on walls adjacent to those ugly chambers.
Even the blockage people talk about occur at those chambers where there is no smooth transition from incoming pipes to outgoing pipe.

You’ll do fine, it’s not the rocket science that’s it’s being made to be.

Our attention should be geared towards important stuff like proper foundation so houses don’t sink or collapse, not how to flow shit into a tank.

On this matter I rest

Soakaway in progress at my micro estate in picture.

Larry1960:

O

Bros it's normal house ooooo . I've done the piping and boxing just wiring now. I'm not using Coleman or cable metal.
No water heater. No plan on inverter or solar panel

Don’t discount solar in the future. But the regular and properly sized wires that carries phcn will also carry renewable energy.

You are right sir, all necessary things supposed to be done before architectural drawings.

n3xt:


Yes, it’s not his job but he needs to be well informed everything important about the land before drawing the plan.

This is one reason I respect ihebrooke (Nairaland architect) so much. He always ensure he obtain all the relevant information before designing for me.

EgunMogaji2:


You’ll do fine, it’s not the rocket science that’s it’s being made to be.

Our attention should be geared towards important stuff like proper foundation so houses don’t sink or collapse, not how to flow shit into a tank.

On this matter I rest

Soakaway in progress at my micro estate in picture.

No pillars at the four corners?
Casting after 6 block setting

EgunMogaji2:


And when one wants to dine with the devil one uses a long spoon.

1) One shouldn’t be having blockages in a well designed system.

2) If I do have a blockage and with two opposable thumbs then I’ll remove the blockage.

I recognize your opinion but my system works for me.

Cheers.

Ordinary common tool called a snake. I have the larger one and the smaller one is available at Shoprite.

Once again, I’m just sharing what I do. It’s not a bible and doesn’t need to be followed.

Yeah, i get your drift, the avg nigerian artisan doesnt like buying tools, or cant even see them to buy them, or needs to be told they exist and shown how to operate them.

The Y or T connector would serve a diyer better, since he would have the tools to fix a blockage and be willing to use them as well. Sadly, the avg nigerian doesnt have the diy mindset.

As per blockage, strange things can cause blockage, when i was much younger and not so responsible, finished using the toilet and inadvertently, a brush fell into the bowl. I just cudnt see myself retrieveing it.. i simply flushed everything, this is a rented apartment, 1st floor. Knowing what i know now, the brush would likely cause blockage sometime in the future.

Sanitary pads is another big culprit, females choose to flush it down the loo since in Nigeria people now go round to collect used sanitary pads from refuse bins to do only what dem and their ancestors know of

Having too many elbows in the piping causes blockage as well. A not so experienced plumber & homeowner could end up with that

earthrealm:


Yeah, i get your drift, the avg nigerian artisan doesnt like buying tools, or cant even see them to buy them, or needs to be told they exist and shown how to opeeate them

Yeah I moved down here with ALL of my tools, well except for the ones that the port rats stole

GoodFaith:


No pillars at the four corners?
Casting after 6 block setting

I’m good. I didn’t post for critique or request for assistance.

Thanks Sir.

there are six pillars in the picture if you look well... its only the middle demarcation wall that doesn't have pillars.

GoodFaith:


No pillars at the four corners?
Casting after 6 block setting

Pascopele:
Good morning Sir, I have got none, can you help me with one?

Sure. I am gonna need ur survey plan.
Chat me up on whatsapp. 08108408732

rmx:

I am in need of quotes for supply and installation of gray powdered coated aluminium ebm curtain wall system and frameless glass for a commercial project on 3 levels , nigalex could also be considered , external glass will be 6 or 10 mm untempered , internal is 10mm tempered , it includes collapsible doors

While I have several quotes already , been following this thread for a few days and I feel I might be able to get better in terms of quality and pricing , must be people with verifiable projects preferably commercial . Location is ibadan

Do you still need more quotes? We are experienced working with glass, cladding etc in various parts of the country. you can look up our thread on nairaland since 2012. Thanks https://www.nairaland.com/1082585/2020-building-construction-office-fitout

sinorte:
Please I need top notch recommendations for artisans that can handle the following jobs:

1. Plastering
2. POP
3. Window design

I understand our brothers from Republic of Benin are skilled at these tasks. So I wouldn't mind someone from that side.

Please let me mention that I prefer to work directly with the artisans. I do not need middlemen or contractors.

Thank you

Hello
I install P.O.P ceiling and related works.
Kindly check outy threads for my work and designs.

You can contact me on +2347069462837

femidbuilder:
Same here. Any recommendations are welcome.

Hello,
I install p.o.p ceilings and related works.
Please check out my threads here for my work and designs.
I've been on Nairaland for a while and I can assure you of no bad reviews.
You can contact me on +2347069462837

Takoro13:
good day house, all protocol duly observed. I say kudos to ogas in the house that has been there making it happening day in day out

my request is how good and advisable to do pop before plastering and if pop is done before plastering, how do you get rid off the cement/concrete stain or how do you protect already installed pop from staining

peace!!

To get the best finishing, you have to plaster before installing p.o.p, if not, the plaster will most definitely stain the p.o.p installed

sinorte:
Please I need top notch recommendations for artisans that can handle the following jobs:

1. Plastering
2. POP
3. Window design

I understand our brothers from Republic of Benin are skilled at these tasks. So I wouldn't mind someone from that side.

Please let me mention that I prefer to work directly with the artisans. I do not need middlemen or contractors.

Thank you

Dominion is the entity that I’ll spend my time doing due diligence on.

Good luck with your project.

ontact us today for your Electrical Mechanical Design and Installation

Check out our thread

Distribution boards
https://www.nairaland.com/2668061/abb-distibution-board-schneider-distribution/6

MEP installation
https://www.nairaland.com/1233943/contact-us-electrical-mechanical-plumbing/25

Cables
https://www.nairaland.com/2326721/nigerchin-kabelmetal-coleman-cables/23

.

n3xt:


When I designed the first model of this building in 2012, parapet and curtain wall wasn’t in vogue then so we went with cladded fascia.

This is my no. 8 model of this particular build. However this is coming with new additions.

Configuration:

- 5 Bedroom Duplex (all room en-suite)
- Game Room in the Attic (Yes you heard me attic )
- 2 large living room
- Ante room
- Sky Roof (yet to be installed)
- Gym
- No wraparound terrace but there are balconies on 3 sides.
- 2 entrances
- Smarthome Technologies
- 14ft headroom ground floor
- 13ft headroom upper floor

And then there’s:
- 2 Bed Apartment (all room en-suite)

.great design

I love these high windows, am wondering how u secure it from being an easy access point for robbers?
How do you intend to cool the game room in the attic

Whats your projected cost to finish the build?

New Price List For Rod And Cement


The price of Rod is on the increase due to exchange rate.


Below are our prices of building materials on Friday, ‎August ‎27, ‎2020:


Remember to order your Rods and Cement from our list below as we await your calls.



Visit ===> Latest Prices of Rods and Cement in Edo/Delta State Nigeria For more details....


DANGOTE CEMENT 3X 50KG

(100 – 399 bags) ===> N 2,500

(400 – 600 bags) ===> N2,480


For Truck Price Call : 070-6481-6581


BUA CEMENT

(100-399) ===> N 2450

(400-600) ===> N 2400


REINFORCEMENT STEEL BARS

25mm Rods (22 Pieces) per tonne ============> 221,000.00 NGN

25mm Rod One Full Length ============> 10,050.00 NGN



20mm Rods (34 Pieces) per tonne ============> 255,000.00 NGN

20mm Rod One Full Length ============> 7500.00 NGN



16mm Rods (53 Pieces) per tonne ============> 233,200.00 NGN

16mm Rod One Full Length ============> 4,400.00 NGN



12mm Rods (94 Pieces) per tonne ============> 235,000.00 NGN

12mm Rod One Full Length ============> 2500.00 NGN



10mm Rods (135 Pieces) per tonne ===========> 256,500.00 NGN

10mm Rod One Full Length ===========> 1,900.00 NGN



8mm Rods (210 pieces) per tonne ============> 273,000.00 NGN

8mm Rod One Full Length ============> 1300.00 NGN



Quarter Rods ( Long ) 50 pieces per bundle ========> 25,000.00 NGN

Quarter Rods ( Medium ) 50 pieces per bundle ========> 17,500.00 NGN

Quarter Rods (Short ) 50 pieces per bundle =======> 12,500.00 NGN

Binding Wires (3kg, 8kg, 10kg, 12kg, 15kg, 20kg) =========> Price Ranges per Kilogram


Call,

Fidelis – 070-6481-6581


Note:

Prices are same on all locations in Benin-City / Delta State.
Free delivery for all items listed (Long Distance May Attract Extra Charges).
Prices are based on bulk discounts and apply when you buy in large quantities.
Prices are at current rates and may change later due to market forces.


PropertyVendor

Danenergy:
Good day house...pls how many bags of cement will it take to set 2500 blocks
Or rather how many 5inches block can one set with one bag of cement...
Pls I need to know b4 this engineer put holes in my pocket

Thanks

You used the word set, generally in fencing, its 1 bag to 100 blocks, so similar should be true for buildings perhaps 80 blocks to 1 bag.
I think people misunderstood tour question to mean moulding..

Pheeew finally i hv gotten to the last page, started from over 70 pages behind

Granite will suffer another increase from September 1st 2020.

earthrealm:

.great design

I love these high windows, am wondering how u secure it from being an easy access point for robbers?
How do you intend to cool the game room in the attic

Whats your projected cost to finish the build?

Projected Cost to Finish: N40m

Securing Windows: We already made provision for matching burglar bars to be installed on the ground and upper floor for that particular window and others.

Cooling the Game Room: There's provision of a 25mm ventilation gap along the eaves. We are also making provision of 50mm air gap between roof insulation and a vapour control layer. Then, there's plan for a vent extraction fan discharging to outside air.