rajput4real93:

What is the gauge of the materials used to fabricate the doors? Then what is single and double? Thanks

fact is that the guage of the pan is 18mm but if you want, I can customize it and make it 16mm but bear in mind that it will cost more. Single door is 3ft and double door is 4ft. The double doors are used for the entrance while the 3ft are used for the rooms. Attached are photos of the two doors. The two on the left are double while the other one is single

Please I want 20 ton of sharp sand and granite in sangotedo. What's the price like, and who can supply? Also want 1 ton of 12 inch iron rod.

michlins:
fact is that the guage of the pan is 18mm but if you want, I can customize it and make it 16mm but bear in mind that it will cost more. Single door is 3ft and double door is 4ft. The double doors are used for the entrance while the 3ft are used for the rooms. Attached are photos of the two doors. The two on the left are double while the other one is single

Thanks for the clarification. But i am yet to see a room with a steel door. Wooden doors are the norms for rooms.

n3xt:


DIY Interlock

Amen and thank you.
I just encourage you to pay attention to the numbers as they’re coming.

N70,000 already sent to the stone dust supplier and the 189,000 for the production/installation has been set aside.

I’ll be making arrangement for cement tomorrow. I use Dangote. Lafarge is cool but it takes longer time to dry and because of the thickness of the stone we are producing, it become difficult removing it from the mold.

The production crew are happy to work because they already knew there’s another 942sqm waiting for them in Ikorodu in the coming week.

I just hope that just like this crew are continually being engaged by you, that you will give me a chance to be a part of such adventure.

michlins:
na dollar make am cost that much sef. These doors cost just above 16,000 as of two weeks ago.

can this be use at rooms entrance instead of wooden doors or foreign doors?

Can u get the design below, and what gauge goes for 18k.

michlins:
how many entrance doors do you have at the building. I will advise that you use iron doors for all the house. They are cheaper and more durable. Each door below costs #18,000 for the single and #28,000 for the double door

rajput4real93:

Thanks for the clarification. But i am yet to see a room with a steel door. Wooden doors are the norms for rooms.

I don't know where you live but steel doors are norms here because of their durability and competitive pricing. A wooden door will cost almost the same price as the iron doors and won't be close to the same quality.


Especially when you are building for commercial needs, iron doors are your sure bet that way, you don't have to worry about your tenants roughening up your doors and you starting maintenance early

jesusson2020:


For sharp sand, no china truck can carry 30tons.

2 of this will carry 30tons and the sand will even remain.

how many tons can this carry both sand and granite

Takoro13:

can this be use at rooms entrance instead of wooden doors or foreign doors?

the only turn off some people have against these doors are the noise. This is something that's very negligible once you have occupants in the building with properties too. Another thing I can tell you is that they are very very competitive and durable. You don't have to worry about working on them for the next seven to eight years. The only thing that will happen is that the paints will fade and you will get a painter and have yourself a brand new door. This renewal touch isn't obtainable with foreign or wooden doors. Remember also the the change in seasons from rainy to dry season affects wooden doors which isn't a problem of iron doors. It has many advantages over wooden doors. The only thing wooden door has against it is the noise which I have explained. Some hinges on wooden doors sef make creaky sound after some years

gordonbarrett:
Can u get the design below, and what gauge goes for 18k.

sir I don't have the design you posted but I believe that there is something that I have which you will definitely like.

The door which costs 18k is the 18mm pan. The 16mm guage will cost 25,000 for the single and 38,000 for the double. Thanks

michlins:
I just hope that just like this crew are continually being engaged by you, that you will give me a chance to be a part of such adventure.

It won’t be long sir. Just keep up the good work.

n3xt:


It won’t be long sir. Just keep up the good work.

"just keep up with the good work". I'm glad that you find my work to be good. Thanks for the words

michlins:
how many entrance doors do you have at the building. I will advise that you use iron doors for all the house. They are cheaper and more durable. Each door below costs #18,000 for the single and #28,000 for the double door

Two entrance doors. But I'm not cool with having iron doors inside. Iron doors at the entrance is just fine.

michlins:
sir I don't have the design you posted but I believe that there is something that I have which you will definitely like.

The door which costs 18k is the 18mm pan. The 16mm guage will cost 25,000 for the single and 38,000 for the double. Thanks

Your prices are very reasonable

rajput4real93:

Your prices are very reasonable

we await for your response and patronage

Fromwater:

Two entrance doors. But I'm not cool with having iron doors inside. Iron doors at the entrance is just fine.

ok cool bro. Let's help you make them.

michlins:
how many entrance doors do you have at the building. I will advise that you use iron doors for all the house. They are cheaper and more durable. Each door below costs #18,000 for the single and #28,000 for the double door

I passed a welder's shop and asked for the price of these doors (single). The criminal told me 220k and I'll supply the materials. I think he was drunk sha.

Aforxzy:


It's called a hollow slab. It's consists of hollow clay pots and reinforced concrete. It is used to reduce the slab load hence the transferred load to the foundation is small. It is appropriate when the bearing capacity of the soil is low because of its low weight. It is also very good when you have large span/ panel. It hids the beam very well so wont see it. It is very common in areas with high water table.

you are very correct ma... saw this around makoko area in lagos.. now make sense because of the soil type

JustCryptos:


I passed a welder's shop and asked for the price of these doors (single). The criminal told me 220k and I'll supply the materials. I think he was drunk sha.

where's the place please.


He's not a criminal biko. He's a businessman. He didn't pick money from your pocket

JustCryptos:


I passed a welder's shop and asked for the price of these doors (single). The criminal told me 220k and I'll supply the materials. I think he was drunk sha.

I felt the same way too when I saw this ad on Jiji. N50k for ordinary concrete sphere.

The guy said if I’m buying 10, he’ll reduce N5,000 per pc. I just shook my head and decide to DIY.

Enyinne:
My dear , we know his tricks ,he thinks people on nairaland lack experience so he was ready to exploit. I called him more than 8times to supply me the granite , he ignored me until i gave a man his contact to chat him , he answered and quoted 225k for 30tons

He was to rip people off. That's smart of you.

Enyinne:
U thi.eve quoted 10tons of sand for 45k . And granite 225k . U wont make heaven oo. U are out to reap people off . Caveat is on him , shine ur eyes well or else ur money is lost with him

I uv gone through comments on the issue but, i see lots of hypocrisy flood this forum, let me start, she call me names nobody is putting her to order.

Nobody is mentioning it. I hv never insulted her all this while ooo. Let the we know that oooo, when Dennis3D use an insulating word everybody calling for apologies here & there..

michlins:
where's the place please.


He's not a criminal biko. He's a businessman. He didn't pick money from your pocket

Port Harcourt. I look hungrier than him. So, he's supposed to pity me sef.

Where are you based, please?
I noticed that you don't have a dedicated thread for your jobs and most of your posts are on phones.

n3xt:




I felt the same way too when I saw this ad on Jiji. N50k for ordinary concrete sphere.

The guy said if I’m buying 10, he’ll reduce N5,000 per pc. I just shook my head and decide to DIY.

una see this streets of business, some will survive, some will not. At the end of the day, they will blame others. My profits on those doors no reach 2k upon say I can make very few daily

michlins:
we await for your response and patronageok cool bro. Let's help you make them.

What is your location

My name is Olatunji, a POP expert. I am into POP artworks and designs.

Please consult me for your POP atwork and 3D designs and you will NEVER regret you did. For superb works and affordable fees, I am at your service sirs and ma'am. phone number:07062567817 or 07051526876

My name is Olatunji, a POP expert. I am into POP artworks and designs.

Please consult me for your POP artworks and designs and you will NEVER regret you did. For superb works and affordable fees, I am at your service sirs and ma'am. phone number:07062567817 or 07051526876

JustCryptos:


Port Harcourt. I look hungrier than him. So, he's supposed to pity me sef.

Where are you based, please?
I noticed that you don't have a dedicated thread for your jobs and most of your posts are on phones.

I do have a dedicated thread and here's it. https://www.nairaland.com/4088969/classy-iron-works

My location is Nnewi Anambra State

Greetings house, please can anyone assist with information about building approval in nigeria vis-a-vis documents required,procedure and average cost...thanks

Fromwater:

What is your location

Nnewi Anambra State bros

Wow! These are very impressive. Pocket friendly too. If one is to ship to Abuja, what would the cost be like?

michlins:
how many entrance doors do you have at the building. I will advise that you use iron doors for all the house. They are cheaper and more durable. Each door below costs #18,000 for the single and #28,000 for the double door

michlins:
how many entrance doors do you have at the building. I will advise that you use iron doors for all the house. They are cheaper and more durable. Each door below costs #18,000 for the single and #28,000 for the double door

You make this yourself