decimator:
Good day house.
Practically , what is the maximum distance a beam can span between two supports using 12mm rods for both support and beam.

There's nothing like practically in structural Analysis of structure's, there's a code and guideline so Theoretically

Using 12mm grade 410 rebar depends on the loads coming to the beam example I may decide to put 4 no's of 12mm road in a 3m span beam or put 8no's in same 3m span due to the load coming to it..

But for span in beam is define by how deep ur beam is , so cater for deflection..

Provide d layout and purpose of d design and I will tell you the best reinforcement to use..
But practically without adequate measure it will WORk and fail soonest..

Don't forget that the beauty of your house is nice electricity
Contact us to make your house as beautiful as heaven. O81three216three248

diordaves:


Mine was from ebay UK about three years ago and still working as at my last visit to Nigeria before the pandemic.

OK, brand name or picture would be great, there are so many fakes out there. thnks

rotecch77:


Go to jubowu pop cement materials mkt you will get it there
Price range 2600-2900
I bought some their last 3 weeks ago

Thanks, I needed something like this (attached below) in the local market. I couldn't find both in jibowu and mushin. So I had to fabricate myself, picture attached.

Badgers14:


Do you mind sharing the pictures of the Openable burglary?

I had an idea once, drew a sketch, sent it to a welder.. he said oga dem no dey build that kind here.. even my uncle that declared himself an engineer ( he was just supervising the work, I had a real engineer on site). Both said em em , my son.. they don't do that kind here

Certainly, l would have done so along with my post but l am not within reach of building as l type right now, it will take a few weeks to get to it as Covid-19 restrictions are still in force with respect to Flights in some places.
But l will revisit my Post and add the Picture.
Thanks.

Lastpage!

beamNIGERIA:


Thanks, I needed something like this (attached below) in the local market. I couldn't find both in jibowu and mushin. So I had to fabricate myself, picture attached.

Hello, please show more pictures of that skirting board you have there. I like it more than using tiles for skirting. It seems using skirting boards is more expensive than tiles but it brings out finer details and more beautiful than using tiles.

Almost all builds in Nigeria uses same floor tiles for their skirting. I like the white board skirting thing more than tiles.

[quote author=mrsteel post=94142481]
Request for d PDF copy of d drawings from ur architect & send it to anyone that wish to help u with d estimate.

[/quote}


am not in nigeria at the moment

bebe2:
here is the architect drawing.

professionals in the house pls can you give a rough estimate of how much it will take to
complete this rental property.
its a very dry land .

i want standard finishing , nothing too fancy.
the bed room size are 12 by 11 and the living rooms are 16 by 14.

@ericko2k2 @rotecch77, @spyder880, @egunmogaji and others plssss i need your input
as this will help me decide if to build it or concentrate on other projects.

p.s : the property already has soak away, borehole and an over head tank.

thanks

@ericko2k2 @rotecch77, @spyder880, @egunmogaji and others plssss i need your input
as this will help me decide if to build it or concentrate on other projects.

am on my knees, please. i know u wont have the exact but a loose estimate will give me a guide.

lastpage:


Certainly, l would have done so along with my post but l am not within reach of building as l type right now, it will take a few weeks to get to it as Covid-19 restrictions are still in force with respect to Flights in some places.
But l will revisit my Post and add the Picture.
Thanks.

Lastpage!

Thanks in advance. Your contributions on this forum are highly appreciated Chief.

And if any metalworker on this forum wants to run with the concept, especially as a retro-fit option, there would be a good market for this.

Cc Michlin (and any other metal fabricator)

Personally I have over two dozen windows where this can be deployed, again as a retrofit.

bebe2:


@ericko2k2 @rotecch77, @spyder880, @egunmogaji and others plssss i need your input
as this will help me decide if to build it or concentrate on other projects.

am on my knees, please. i know u wont have the exact but a loose estimate will give me a guide.

Humble apologies but this is not my forte Madam.

[quote author=bebe2 post=94174520][/quote]
U don't need to be in Nigeria
PDF is soft copy
The architect will send it to u via email or WhatsApp. Then u can forward it to any QS that wish to help u with d estimate via email or WhatsApp too.

bebe2:

and others plssss i need your input
as this will help me decide if to build it or concentrate on other projects.

am on my knees, please. i know u wont have the exact but a loose estimate will give me a guide.

Guess estimate is not always accurate, but something around 10m - 12m since it is a whole structure. Just that building materials keep increasing on a daily basis these days. U have been contemplating whether to continue with this build, if your mind no catch am, it is best u leave it.

jabolo:


Thanks in advance. Your contributions on this forum are highly appreciated Chief.

And if any metalworker on this forum wants to run with the concept, especially as a retro-fit option, there would be a good market for this.

Cc Michlin (and any other metal fabricator)

Personally I have over two dozen windows where this can be deployed, again as a retrofit.

drop a measurement and I will make you a concept. If it's ok with you,we can run the rest

...

I for one do not worry about what everyone is doing. If a tenant is too big for what i have to rent, they are way too big to be a renter; i always advise them to go build their own house. Most ROI on renter in " Big Area Codes" like Lekki are in the Mid Single digit like 4% -6%. You buy land for 10M conservatively, Build with 45M. Then rent for 2M...

I have a studio apartment that i used as experiment. The first unit cost me #1.8M; POP, Sweethome toilet, Marble slabs etc. The subsequent ones were without POP and the #45k Sweethome toilet. Guess what? the after units with less expensive fixtures commanded 40K per annum more than the first unit.

It good to build luxury homes, but let it be because you want it so, not because you think the market demands it. In a country like Nigeria with City with massive home shortage, 17M units shortage per year; what Nigerians need is a Clean, Safe and Affordable accomodation, not luxury. Like i said above, any tenant that wants luxury, he or she should go build his or her own. Lobaton!!!

BrabusNG:


I did a project here and we were looking at spending about N15m in 2015 to import fortified glass only. We will fabicate the frames here.

I told the client “There’s no sense in this no matter how hard you try to convince me. We want to put a N20m window in a house where we used N150 naira block.”

That was the end of the story!

true2home:
I for one do not worry about what everyone is doing . If a tenant is too big for what i have to rent, they are way too big to be a renter; i always advise them to go build their own house . Most ROI on renter in " Big Area Codes" like Lekki are in the Mid Single digit like 4% -6%. You buy land for 10M conservatively, Build with 45M. Then rent for 2M...

I have a studio apartment that i used as experiment. The first unit cost me #1.8M; POP, Sweethome toilet, Marble slabs etc. The subsequent ones were without POP and the #45k Sweethome toilet. Guess what? the after units with less expensive fixtures commanded 40K per annum more than the first unit.

It good to build luxury homes, but let it be because you want it so, not because you think the market demands it. In a country like Nigeria with City with massive home shortage, 17M units shortage per year; what Nigerians need is a Clean, Safe and Affordable accomodation, not luxury Like i said above, any tenant that wants luxury, he or she should go build his or her own. Lobaton!!!

That say it all,.....SOME Nigerians dreams/demand are too wild to be regarded as common sense......The advance world standard we are tripping to emulate uses average quality materials for finishing in their buildings but with quality handwork, clean, safe, and above all affordable to majority of the society classes they have. Anyone is free to spend his money as he wishes but the basic necessities in a house or apartment is just more than enough.

Good morning,

Please how are tilers paid? Do they charge per square meter or what? What should be the standard charge for installing 400m² tiles?

Please what's the standard dimensions that should be dug for waste water and septic tank? How much will be good for the labours to dig them?

true2home:
I for one do not worry about what everyone is doing. [b]If a tenant is too big for what i have to rent, they are way too big to be a renter; i always advise them to go build their own house[/b]Most ROI on renter in " Big Area Codes" like Lekki are in the Mid Single digit like 4% -6%. You buy land for 10M conservatively, Build with 45M. Then rent for 2M...

I have a studio apartment that i used as experiment. The first unit cost me #1.8M; POP, Sweethome toilet, Marble slabs etc. The subsequent ones were without POP and the #45k Sweethome toilet. Guess what? the after units with less expensive fixtures commanded 40K per annum more than the first unit.

It good to build luxury homes, but let it be because you want it so, not because you think the market demands it. [b]In a country like Nigeria with City with massive home shortage, 17M units shortage per year; what Nigerians need is a Clean, Safe and Affordable accomodation, not luxury. Like i said above, any tenant that wants luxury, he or she should go build his or her own. Lobaton!!!

the bolded knocked me out completely

Good morning.
contact me for your roofing woods,roofing materials and General roofing contract.
we will serve you better and give you the best.





Topsroofing.

I believe that this satisfies all and sundry.

Grass areas, trees, lots of concrete, small house, big house, duplex, flats


https://www.youtube.com/watch?v=HTAL0bB4qzw

Rotech77Ditto:



You can used “Turkish made rugged pvc toilet door

Still your one and only “rotecch77”

Are these doors locally made or imported?

Dubemcapital1:



No 1 goes well with me.

My brother, I didn't ask for price before taking pictures. That number 1 is 1.6 million.

Number 3 is about 500k

I had to settle for the one attached which I got for 360k

Muyi002:


Are these doors locally made or imported?

Clearly stated above “Turkish made”

beamNIGERIA:


Thanks, I needed something like this (attached below) in the local market. I couldn't find both in jibowu and mushin. So I had to fabricate myself, picture attached.

What available in mkt is fiber and plastic type.

I did something close to this your own with HDF board about 4yrs ago for NL member too somewhere in Ajah area

I love this your design very unique

mrsteel:

Guess estimate is not always accurate, but something around 10m - 12m since it is a whole structure. Just that building materials keep increasing on a daily basis these days. U have been contemplating whether to continue with this build, if your mind no catch am, it is best u leave it.

thanks for dat,
i can easily use dat money to start of my land in abraham adesanya.
that opic land has been there for over 8yrs and it feels like a waste.
but no need throwing good money after bad

EgunMogaji2:


Humble apologies but this is not my forte Madam.

no worries,
tnk u

DEGREE2466:


My brother, I didn't ask for price before taking pictures. That number 1 is 1.6 million.

Number 3 is about 500k

I had to settle for the one attached which I got for 360k

where's the location

bebe2:


thanks for dat,
i can easily use dat money to start of my land in abraham adesanya.
that opic land has been there for over 8yrs and it feels like a waste.
but no need throwing good money after bad

l also have some real Estate investment within that Opic axis but the problem with that area is the roads, that igbesa / sokoto road and the one that comes from Mile2 Agbara axis is terrible

if and only if Ogun state government addresses the roads issues within that axis it will be fine and it will drive the value of real estate investment up and that location has over 150 companies surrounding the axis, ranging from banks, University, polytechnic, flour mill, smitkline beecham, nestle foods, igbesa / Chinese free Zone port and several small and medium scale businesses but yet with terrible bad roads

Winners Chapel of Oyedepo wanted to fix the roads from Agbara estate to Otta but Ogun state government wanted the cash to be given to them and the church backed off because the governor will use the money to eat amala and bokoto, does Ogun state have a Governor

bebe2:


thanks for dat,
i can easily use dat money to start of my land in abraham adesanya.
that opic land has been there for over 8yrs and it feels like a waste.
but no need throwing good money after bad

You’d spent about same amount building in both location but one gives higher ROI than the other.

BrabusNG:


You’d spent about same amount building in both location but one gives higher ROI than the other.

lekki its far more expensive o, the foundation alone can cost 10,illion

Muyi002:


Are these doors locally made or imported?

Allegedly imported from Turkey.

It could be made in Nigeria and rebranded.

It could have been made in any other country and rebranded.

Nigeria jagajaga.

bebe2:


lekki its far more expensive o, the foundation alone can cost 10,illion

Foundation of what size of building are we talking about?

Four years ago, I did thecarcass of most of my projects in Lekki with 10 - 15m

The most expensive carcass is about N20m and the footprint is almost a full plot of land.