DanIduh06:
Morning Prof.

Can one explore the possibility of doing PhD with you?.

I just thought of this.

Esteem regards

wip7:


Good day,

Yes yes, any interested person can take Ph.D. with me. If you read some of these posts you can see my research areas. I am also willing to collaborate with Supervisors and Researchers based in Africa or anywhere for knowledge exchange or co-supervising provided the supervisors are not lazy or unserious.

May I know your research interests and background?

Actually am working on our research page to give more details on what we do; personally, I will love someone looking at research-lab-to-market idea.

wip7:


Good day,

Yes yes, any interested person can take Ph.D. with me. If you read some of these posts you can see my research areas. I am also willing to collaborate with Supervisors and Researchers based in Africa or anywhere for knowledge exchange or co-supervising provided the supervisors are not lazy or unserious.

May I know your research interests and background?

Actually am working on our research page to give more details on what we do; personally, I will love someone looking at research-lab-to-market idea.

DanIduh06:
[color=#006600][/color]

Good to know and thanks.
Research interests ; biotechnology (environmental, industrial), with major emphasis on biosensors.

Background
Bsc microbiology (Unijos)
Gained little knowledge on some molecular techniques at NVRI (National Veterinary Research Institute Vom, Plateau State).
Msc Microbiology (ongoing) (Unilag)
Here I started nurturing the interest for biotechnology.

But I must say that I lack a adequate exposure to most practical techniques, thus seeking for opportunities to equip my self.

I don't mind if there is any short (few months) internship one could consider to brush up.

Regards Prof.

DanIduh06:
Thank you for your time Prof.

But you got me thinking.
I like the food industry or Agriculture.

I would welcome any window of gaining requisite experience.

Electrochemical station in Nigerian Universities; could just be all theories.

Can the electrochemical aspect be done over there at minimal cost?

Still consuming you memo above.

Thanks for making out time.


Regards Prof.

wip7:


We have the electrochemical station in my lab, to be good, one may need to have access to the device, how to use it, interpret the results and many other things.

If you want to get attached to a university in Nigeria and your supervisor there approves you to work on this, we can make video training on the research and you can see when we are ready. But it will make a lot of sense if you are developing the biosensor yourself and testing it in your local environment. For example; if you design a sensor for the detection of illicit drugs, and want to promote its robustness to law enforcement company/agency, you need the portable handheld device with you to demonstrate it.......without that you can do anything. If you will work on sensors for detection of pesticides in agricultural fields, you need the device on the field. Its tiny and can fit into your phone.

First spend time come up with the specific ones that interest you, then you will do comprehensive literature review and from there one can know more what you need to enhance and then the main research can be fabricated.

wip7:


We have the electrochemical station in my lab, to be good, one may need to have access to the device, how to use it, interpret the results and many other things.

If you want to get attached to a university in Nigeria and your supervisor there approves you to work on this, we can make video training on the research and you can see when we are ready. But it will make a lot of sense if you are developing the biosensor yourself and testing it in your local environment. For example; if you design a sensor for the detection of illicit drugs, and want to promote its robustness to law enforcement company/agency, you need the portable handheld device with you to demonstrate it.......without that you can do anything. If you will work on sensors for detection of pesticides in agricultural fields, you need the device on the field. Its tiny and can fit into your phone.

First spend time come up with the specific ones that interest you, then you will do comprehensive literature review and from there one can know more what you need to enhance and then the main research can be fabricated.

DanIduh06:
[color=#006600][/color]


@ the bolded, I have decided to talk to my departmental Postgraduate coordinator to see how you can made my co-supervisor (if it will be convenient for you).

I want the sensor developed locally within Lagos, if possible within the University of Lagos.
I was making preparations to reach out to Professor Emmanuel Iwoha of the University of Western Cape South Africa (he owns a sensor lab over there) for a short stay in his laboratory ( am willing to pay for all my expenses).
Fortunately for me, I came across here and I never let you go.

The food industry is my target.
How can one subscribe to some of these recommended journals (Springer et al)

One is less busy due to ASUU strike.

My target is to equip myself so I can be competent enough to carry out this research (including interpretation).
I intend publishing some of my work in the mentioned journals.

My dear mentor, all I can say is God bless richly as you guide me to take this quantum leap.

Regards Prof.

informtransform:
Academic Master is a US based writing company that provides thousands of free essays to the students all over the World. If you want your essay written by a highly professional writers, then you are in a right place. We have hundreds of highly skilled writers working 24/7 to provide quality essay writing services to the students all over the World.

transbut5:
Good day scholars...I recieved review report from a paper I submitted to Taylor and Francis and the editor prompted me to submit the graphs in editable format whereas the graphs were created in MATLAB and exported as a jpeg figure. My question is; how can I make the graphs editable? How can I export the graphs directly from matlab to excel...

My question is; how can I make the graphs editable?

How can I export the graphs directly from matlab to excel...

KelvinCoaster:
Wip7,
Nice lecture!
I just learnt something.

Remain blessed!

wip7:


Thank you !

KelvinCoaster:
Wip7,
Nice lecture!
I just learnt something.

Remain blessed!

chem58:
U don't add prof

KelvinCoaster:

He didn't complain.


Hope you learned something too!


Cheers!

wip7:
General Manuscript Structure and Content Guidelines: A brief note

In general, to submit a manuscript, an author may request to have the following handy on sperate pages:

---Cover letter
---Highlights
---Author Credit statement
---Declaration of competing interest
---Manuscript with all details

Cover Page/Letter: Please review the guidelines for authors of your selected journal before you start writing your cover letter, as not all journals need a cover letter. Research results that would interest their readers must be selected by editors. If it is not quite clear how your research paper could generate interest based on its title and content alone, your cover letter is the only chance you will get to persuade the editors that your work is worth further reviewing. Sometimes, the cover letter is used by many editors to elucidate whether authors can obey simple instructions. Therefore, your chance to illustrate the relevance of your research to journal editors is a valuable introductory cover letter.

Key points to include in a cover letter:

--------Editor’s name if you have it or just simply write Dear Editor
--------Mention the name of the journal you are submitting to
--------A brief statement that your paper is not being considered by other journal or has not been previously published by another journal
--------Brief description of the research, why it is important, and why you think the readers of the journal would be interested in it
--------Contact information for you


Avoid the following:

----Avoid the use of jargons or too many acronyms
----Avoid using humor or familiarity tones or language like you are toasting the editor
---Try to limit the use of words such as “novel,” “first-ever,” first in the century”. Most times these types of words show bias and will make the editor question your ability to assess your work’s merits objectively.



Below is a simple guide:

Dear Prof.Wip or Dear Editor,

I wish to submit an original research article entitled “END SARS and REFORM POLICE” for consideration by the International Journal of Police.

Please explain in your own words the novelty and importance of the studies, mention the significant problem that you addressed in your research, and state, why the manuscript fit to be published in this journal and why you think the readership of the journal would be interested in it.

You may also compare your research with previously published like: “This manuscript expands on the prior research conducted and published by WIP7 in the Journal of SARS”

If you have previously part of your research elsewhere and the current work expanded on it: You can say: “I have presented a part of my findings in JP Journal. And I have acquired additional data to develop a new understanding of .....

like: I believe that this manuscript is appropriate for publication by IJP because it… (give specific reference to the journal’s Aims and Scope that your work fits).

Close it with:

I confirm that this work is original and has not been published elsewhere, nor is it currently under consideration for publication elsewhere.

We have no conflicts of interest to disclose. Please address all correspondence concerning this manuscript to me at (give your official email address not Facebook page ooo).

Thank you for your consideration of this manuscript.

Sincerely,
Dr. SARS


---------------------------------------------------------------------------

Main Manuscript Should contain


Title Page

Include the title, all authors’ names and affiliations, and full contact information for the corresponding author.

Abstract

Usually, limit this to 150-170 words and avoid references or too many abbreviations (if you must use then pre-define it), and five to six relevant keywords (avoid repeating the words in the title) should be listed directly under the abstract on the same page.

Introduction

The introduction should explain the rationale behind the study, highlight the gap in knowledge being filled by the present research, cite previous research relevant to the current study, and clearly describe the significant contribution to existing studies. Ensure the introduction is balanced in terms of content.

Methodology

This section should contain a clear and concise description, justification of the conditions and procedures of the study, as well as the analytical tools or methodology used.

Results and Discussion

This section should present the collected data and analysis. Results for all measures should be reported in a concise, straightforward manner, using tables or figures when appropriate. Duplication of information that is presented in tables or figures should be minimal in the text, and all results should be reported in the text, rather than figure captions. The discussion should also explore the broader implications and significance of the findings, explain the trend in the result, and link it to possible reasons supported with references.

Conclusion

This should not repeat the abstract but should provide a summary of significant results and trends observed. Avoid references here and limit to 300 words.

References


-------------------------------------------------------------------

Next, we shall talk about verb tense in scientific/academic manuscripts

Choosing the correct verb tense for each section of a scientific manuscript can be challenging, but it is worth the effort.

Next time.

GGGPassword:
Good afternoon everyone !!!

So happy joining this great platform.

My name is Felelu.

My profile include.

Diploma in Computer Engineering
B.Eng in Computer Engineering
MSc in Information Technology
MSc in Electrical Electronics Engineering

At wip7.

At his junction, I intend going for PhD focusing on AI. Could you please advise me on this part in terms of laboratory for experiment and also the process of academic publishing.
.

wip7:


Great profile...welcome aboard!

AI is a broad field that can be connected to almost all fields of research for product design or development. Since you have a background in Computing then this should not be an issue for you. You only need to think of what area of research interests you. There is various hot topics/research in AI while some only need data some may involve lab/technical work to inculcate the trained AI model into physical devices.

So you have to decide if you want to research AI-enabled devices (fabricating the devices and integrate trained AI) or AI-enabled services (get data, train data, and deploy them as apps)..........This will then inform if you will need to go to the lab or just make use of existing/fresh data. Think of your current environment, think of what problem/challenges and then see how you can solve it then start to think of what you will need to solve these problems.

Considering your background you may go for AI-powered electronics (this will entail device fabrication or using already fabricated devices and see how you can modify it to dance to your tunes). There are many opportunities in real estate, agriculture, and medical fields that will be needing AI-powered devices.

Best wishes
Attached here are some areas which are majorly AI-enabled services.

wip7:


Great profile...welcome aboard!

AI is a broad field that can be connected to almost all fields of research for product design or development. Since you have a background in Computing then this should not be an issue for you. You only need to think of what area of research interests you. There is various hot topics/research in AI while some only need data some may involve lab/technical work to inculcate the trained AI model into physical devices.

So you have to decide if you want to research AI-enabled devices (fabricating the devices and integrate trained AI) or AI-enabled services (get data, train data, and deploy them as apps)..........This will then inform if you will need to go to the lab or just make use of existing/fresh data. Think of your current environment, think of what problem/challenges and then see how you can solve it then start to think of what you will need to solve these problems.

Considering your background you may go for AI-powered electronics (this will entail device fabrication or using already fabricated devices and see how you can modify it to dance to your tunes). There are many opportunities in real estate, agriculture, and medical fields that will be needing AI-powered devices.

Best wishes
Attached here are some areas which are majorly AI-enabled services.