Hi

No long story,

My Toyota Camry 2007 LE Runs Fine though at least I wouldn't know if it doesn't since am no expert..

I just bought the OBII Scanner so I thought it wise to run the scan..

Although I do noticed my fuel runs out a bit faster and also the RPM on ideal is always at 1000RPM thus the sound is slightly high..


Now below are the error code

P0113
P0016
P0353
P0354

Pls, expert in the house familiar with Toyota Camry, what needs to be done

Thanks in anticipation

cc gazzuz cc kingreign
help a bro

Anyone??

cc gazzuz cc kingreign

samintegrity:
Anyone??

cc gazzuz cc kingreign

Chat me up tomorrow 07034581213

kingreign:

Chat me up tomorrow 07034581213

OK bro

Here's what's going on:
1. your #3 and #4 ignition coils needs to Br replaced.

2. crankshaft and camshaft timing is off by some tooth, and needs to be correctly synchronized.

3. inspect your mass airflow meter, for dirt's on it. the intake air temperature sensor is incorporated in the MAF sensor itself.

4. What symptoms or problems are you getting?

TRYGO:
Here's what's going on:
1. your #3 and #4 ignition coils needs to Br replaced.

2. crankshaft and camshaft timing is off by some tooth, and needs to be correctly synchronized.

3. inspect your mass airflow meter, for dirt's on it. the intake air temperature sensor is incorporated in the MAF sensor itself.

4. What symptoms or problems are you getting?

Thanks bro..

Nothing much aside from the slight increase in fuel consumption as well as the fact that I notice when ac is on and I step on brake, the car kinda shakes... Maybe because the rpm at that time goes below 600rpm.

Also I noticed on ideal RPM is usually at 1000rpm plus it makes a little bit of noise when compared to my frnd muscle Camry.


Will inspect the coil as well as others pointed out.. Thanks

People of God...

I have been able to fix the P0113,P0353 and P0354

Was able to detect the coil thats bad, got it replaced, also cleaned the air flow sensor.. And this also fixed the air flow issues


However, the last but not the least still remains P0016,

My mech said the sensor is okay, but time didn't permit for further discus..

So, I have rescanned and have just 1 error code left which is P0016.

Biko what could be the fix to this?? Someone earlier suggested the timing chains..

Any other suggestions just to narrow the issues to the nearest possible solution..

Thanks

samintegrity:
Hi

No long story,

My Toyota Camry 2007 LE Runs Fine though at least I wouldn't know if it doesn't since am no expert..

I just bought the OBII Scanner so I thought it wise to run the scan..

Although I do noticed my fuel runs out a bit faster and also the RPM on ideal is always at 1000RPM thus the sound is slightly high..


Now below are the error code

P0113
P0016
P0353
P0354

Pls, expert in the house familiar with Toyota Camry, what needs to be done

Thanks in anticipation

something is wrong with this scan. Doesn't add up.

chukel:
something is wrong with this scan. Doesn't add up.

Could you kindly share your view?? Thanks bro

samintegrity:


Could you kindly share your view?? Thanks bro

you can't have P0353 and P0354 without a misfire. So you should have P0303 and P0304 too. And there is no way a 4cyl car will run normal with compromise to 2 cylinders. Technician ought to have wiped those codes and rescanned after running some distance. Well the good thing is that your issues have been solved. However the integrity of the scanner is questionable.

chukel:
you can't have P0353 and P0354 without a misfire. So you should have P0303 and P0304 too. And there is no way a 4cyl car will run normal with compromise to 2 cylinders. Technician ought to have wiped those codes and rescanned after running some distance. Well the good thing is that your issues have been solved. However the integrity of the scanner is questionable.

Thanks for your input sir, however, this what actually occurred..


Coil C happens to be working but very weak, my guess is that the C weakness may have resulted to the code being thrown by Coil D.

So we test the Coil C, and discovered it wasn't really functional, while D works fine.

So upon changing Coil C, and rescan those codes disappeared..

Also, it is worthy to note that before the fix I did performed the scan like 6 different times, BTW days Oo,..

Thanks again bro for your input

How did u solve the p0016 fault

samintegrity:
People of God...

I have been able to fix the P0113,P0353 and P0354

Was able to detect the coil thats bad, got it replaced, also cleaned the air flow sensor.. And this also fixed the air flow issues


However, the last but not the least still remains P0016,

My mech said the sensor is okay, but time didn't permit for further discus..

So, I have rescanned and have just 1 error code left which is P0016.

Biko what could be the fix to this?? Someone earlier suggested the timing chains..

Any other suggestions just to narrow the issues to the nearest possible solution..

Thanks

susanc:
How did u solve the p0016 fault

Never got to solve it, sold the car shortly after bro

Ok

samintegrity:



Never got to solve it, sold the car shortly after bro